PRODUCT DATA KURE-N-SEAL 30 - Best Materials

1 DescriptionKure-N- seal 30 is a transparent,30% solids, solvent-based, acryliccuring membrane. Apply it to damp ordry surfaces to provide a curing only, 1 coat may besufficient; 2 coats, however, will givebest results. To seal and dustproof, 2coats are (m2/L) per coat:Curing only:200 400 ( )Second coat (dustproofing and sealing)400 600 ( )Renovating, dustproofing, and sealing:200 300 ( )Under mastic-type floor adhesives:400 600 ( )Coverage varies with applicationmethod,texture, and porosity 30:5 gallon pails ( L)55 gallon drums (208 L)Fugitive red dye:1 pint ( L) containers; use 1 pt/ 55 gallon drum ( L/208 L drum) and oz/5 gallon pail (44 L pail).Reducer 990:1 gallon ( L) pailsColorTransparentShelf Life10 months when properly in unopened containers in cool,clean,dry to UseAPPLICATION Offices Warehouses Commercial buildingsLOCATION Interior or exteriorSUBSTRATE Freshly placed concrete Finished concrete Aged concreteFeaturesBenefits Compliant with AIM regulationsOffers a range of temperature applications 30% solids by weightProvides a high gloss finish Curing compoundEfficiently retains moisture for freshly placed concrete; ensures proper strength development.

2 Minimizes shrinkage cracking Sealer and dustprooferMakes surfaces easier to clean and maintain Abrasion resistantExtends wear Reduced fluid penetrationIncreases stain resistance of concrete Compatible with a variety of adhesivesCan be tiled or carpeted over Available with fugitive red dyeHelps ensure even coverageKURE-N- seal 30 Transparent, acrylic, solvent-based and high-gloss curing, sealing, anddustproofing compoundPRODUCT DATAC oncrete Curing03 39 003 Test DataMoisture retention,kg/m2 ASTM C 309(applied at 200 ft2/gal) KURE-N-SEAL requirement retention,kg/m2 ASTM C 156(applied at 300 ft2/gal) KURE-N-SEAL requirement< results are averages obtained under laboratory conditions. Reasonable variations can be RESULTSTEST METHODSH owtoApply Surface PreparationNEWLY PLACED CONCRETE1.

3 Surface must be sound and properly Surface is application ready when damp but notwet, and it can no longer be marred by foot CURED BARE CONCRETE1. Level any Remove all dirt, dust, oil, grease, asphalt andforeign matter. Clean with caustics and detergents asrequired. Citrus Degreaser is excellent for removingoil stains and many curing compounds (see FormNo. 1017985).3. Rinse thoroughly and allow to dry so that surfaceis no more than damp and never ,grout and fill cracks and Surface must also be free of any dust, dirt, andother foreign matter. Remove any incompatiblesealers or coatings. Clean as described under "Newlycured concrete."Application1. Stir KURE-N-SEAL 30 thoroughly before Apply a continuous, uniform film by an airlesssprayer with a tip size of , short-nap roller orlamb s wool applicator. Hand held sprayers are curing, only 1 coat is necessary.

4 Apply evenlyand uniformly after final finishing. Apply second coatwhen all trades have finished and structure is readyfor To seal and dustproof, 2 coats are required. Applythe second application when all trades arecompleted and site is ready for TimeAt 65 to 85 F (18 to 29 C) at 50% foot traffic or between coats: 4 hoursNormal traffic:overnightMaximum hardness:7 daysMaintenance1. Routinely sweep and wash floors withconventional cleaners and Remove all abrasive grit and wipe up corrosivespills as soon as Inspect application periodically for Renovate by reapplying KURE-N-SEAL 30 toregain original gloss and UpClean tools and equipment with Reducer 990immediately after use and while KURE-N-SEAL 30 is still DataCompositionKure-N- seal 30 is an acrylic polymer in a Recommended for concrete floors as defined inTable , ACI Standard Federal Specification TT-C-800A AASHTO M-148 ASTM C 1315, Type 1, Class B (per AIMregulations) USDA compliant for use in meat and poultryareas when fully cured Corps of Engineers CRD-C-304, Type 1 and 1D(with fugitive red dye),Class A and B ASTM C 309, Type 1, Class A and B (Type 1 Dwith Fugitive Dye)

5 Typical propertiesSolids content,%30by weightPROPERTYVALUESONNEBORN PRODUCT DATAKURE-N- seal 30 For Best Performance Do not thin. keep away from heat and open flame. Application not recommended when surfacetemperatures exceed 120 F (49 C). For best appearance and performance, applyuniformly and at recommended coverage rates. If KURE-N-SEAL 30 is to be applied in or nearareas containing foodstuffs, they should beremoved before application; do not returnfoodstuffs until KURE-N-SEAL 30 has fully driedand all solvent vapors have dissipated. Heating Ventilation Air Conditioning (HVAC) unitsmay draw solvent vapors into occupied buildinginteriors. Solvent vapors can be irritating. Do notapply KURE-N-SEAL 30 in or around buildingsoccupied by nonconstruction personnel withoutconsulting building management and takingappropriate precautions. Use only with adequateventilation and with a minimum of 6 air changesper hour.

6 Do not apply KURE-N-SEAL 30 to joint faces to becaulked with elastomeric sealants; protect jointfaces by masking. Not intended for surfaces to receive concreteoverlays or additional toppings, coatings, sealersor ceramic tile (without proper surfacepreparation). Not recommended as a release agent. Do not use in areas that require resistance tosolvents. The red hue in fugitive red dye will dissipateupon exposure to UV light. Although KURE-N-SEAL 30 is compatible with avariety of carpet, vinyl tile and floor coveringadhesives,always conduct a test applicationbeforehand. KURE-N-SEAL 30 will highlight imperfections andmay darken the final appearance of the concretesurface. KURE-N-SEAL 30 can be applied to coloredconcrete or dry shake hardeners,but mottlingmay occur. KURE-N-SEAL 30 is considered a light-dutysealer; may rubber burn when subjected toforklift or other wheeled traffic.

7 Mechanical methods are recommended forremoving KURE-N-SEAL 30. For professional use only; not for sale to or useby the general public. Make certain the most current versions ofproduct data sheet and MSDS are being used;call Customer Service (1-800-433-9517) toverify the most current versions. Proper application is the responsibility of the visits by BASF personnel are for the purposeof making technical recommendations only and notfor supervising or providing quality control on and SafetyKURE-N- seal 30 CautionKure-N- seal 30 contains Solvent naphtha(petoleum), light aromatic; 1, 2, 4 trimethyl benzene;xylene; Cumene and liquid and vapor. May cause skin andeye cause dermatitis and allergicresponses. Inhalation of vapors may cause irritationand intoxication with headaches, dizziness andnausea. Ingestion may cause irritation. May beabsorbed through skin. Repeated or prolongedexposure increases the risk of absorption.

8 Reportsassociate repeated or prolonged occupationaloverexposure to solvents with permanent brain,nervous system, liver and kidney MISUSE BY DELIBERATELY INHALINGTHE CONTENTS MAY BE HARMFUL OR MSDS AND TECHNICAL data GUIDE NOT USE UNTIL ALL BYSTANDERS HAVEBEEN WARNED OF PRODUCT HAZARDS. keep OUTOF THE REACH OF CHILDREN. keep AWAY FROMHEAT, FLAME AND SOURCES OF IGNITION. Vaporsare heavier than air. DO NOT cut or weld on or nearempty container. Empty container may containexplosive vapors or hazardous residues. Keepcontainer closed. Use only with adequate contact with eyes,skin and clothing. Washthoroughly after handling. DO NOT breathe impervious gloves, eye protection and if the TLVis exceeded or PRODUCT is used in a poorly ventilatedarea, use NIOSH/MSHA approved respiratoryprotection in accordance with applicable federal,state and local label warnings mustbe observed until container is commercially cleanedor AidIn case of eye contact, flush thoroughly with waterfor at least 15 minutes.

9 SEEK IMMEDIATE MEDICALATTENTION. In case of skin contact, wash affectedareas with soap and water. If irritation persists, SEEKMEDICAL ATTENTION. Remove and washcontaminated clothing. If inhalation causes physicaldiscomfort, remove to fresh air. If discomfort persistsor any breathing difficulty occurs, or if swallowed,SEEK IMMEDIATE MEDICAL to Material Safety data Sheet (MSDS) forfurther 65 This PRODUCT contains material listed by the stateof California as known to cause cancer, birth defectsor other reproductive lbs/gal or 646 g/L, less water and medical emergencies only,call ChemTrec1 (1-800-424-9300).SONNEBORN PRODUCT DATAKURE-N- seal 30 SONNEBORN PRODUCT DATAKURE-N- seal 30 BASF Construction Chemicals, LLC Building Systems889 Valley Park DriveShakopee, MN, Service 800-433-9517 Technical Service800-243-6739 For professional use for sale to or use by the general public.

10 2007 BASFP rinted in WARRANTY NOTICE Every reasonable effort is made to apply BASF exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factorsbeyond our control. Therefore, except for such replacement or refund, BASF MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and BASF shall have no other liability with respect thereto. Any claim regarding PRODUCT defect must be received in writing within one (1) year from the date of shipment.