Regenerative Blowers/Vacuum Pumps Full Flow and Half Flow

1 TurboTron full Flow and Half Flow Regenerative Blowers/Vacuum PumpsGardner denver patented full Flow and Half Flow TurboTron Blowers/Vacuum Pumps are specifically designed to provide continuousflow, pulse-free air, with the versatility to perform in numerous air applications. Its unique capabilities make TurboTron the choice inapplications from wastewater treatment aeration and pneumatic convey-ing to chemical tank agitation and vacuum cleaning. Typical industries for the TurboTron include foundries, plating, plastics, pharmaceutical, pulp and paper and printing. Application assistance is available by contacting your localTurboTron FEATURES:POWERFUL Installed as a blower or vacuum pump, the TurboTron features a revolutionary impeller design, achieving multistage compression with a single impeller.

2 This unique design represents the best efficiency in the industry. TurboTron delivers quiet, clean, smooth, pulse-free air with pressures to 13 psig and vacuum to 14 " AND PULSE FREE Noise and vibration are reduced. Even without an accoustical cover, the typical free field noise level is only 82 dBA at three feet, one TurboTron is virtually maintenance free. There is only one moving part and no timing gears. The high tensile strength aluminum composite housing is corrosion resistant. Non-binding Teflon is used in close tolerance areas. Bearings require only occasional greasing and shaft seals are non-contacting and TurboTron s revolutionary design, proven dependability and power make this blower / vacuum producer the best investment for the most demanding vacuum PumpsFULL FLOW SERIES Airflow to 900 cfm Pressure to 13 psig vacuum to 14 "HgHALF FLOW SERIES Airflow to 450 cfm Pressure to 13 psig vacuum to 14 "Hg1351 TurboTron 053101 6/8/01 11:47 AM Page 1 Bulletin GDL-212 Specifications subject to change without notice.

3 Copyright 2001 gardner denver , Inc. Litho in additional information, contact your local representative orGardner denver blower Division100 gardner Park, Peachtree City, GA 30269 Toll Free 800-543-7736 ext. 414 Phone 770-632-5000 Fax 770-486-5629E-mail: our web site: Parts Information, Contact: gardner denver blower Division Customer ServiceToll Free 800-982-3009 Phone 770-632-5000 Fax 770-486-5629 Contact Your TurboTron RepresentativeOther gardner denver Brochures AvailableSymmetrical, dual channel inlet and outletUnique, non-contact stripper seal prevents bindingComputer designed flow passageImpellerNon-contact, non-wearingshaft DESIGNT urboTron full and Half Flow Performance and Dimensional DataHALF FLOWPRESSURE (psig)RPM234567 ("Hg)

4 RPM345678 data for air at standard conditions: Sea level, PSIA, "Hg, 68 F inlet temperature, 36% relative (psig)RPM2234567 ("Hg)RPM345678 , Exhausters and vacuum Pumps Engineered SolutionsMULTISTAGE CENTRIFUGALSINGLE-STAGE CENTRIFUGALPOSITIVE DISPLACEMENT LOBEHELICAL SCREWREGENERATIVEMONITORING AND CONTROL SYSTEMSFACTORY SERVICE, GENUINE GD PARTSW ater &WastewaterTreatmentSolutionsBlower/Exha uster SystemsEngineered vacuum SystemsMULTISTAGE CENTRIFUGALSINGLE-STAGE CENTRIFUGALPOSITIVE DISPLACEMENT LOBEHELICAL SCREWREGENERATIVEROTARY VANEMONITORING AND CONTROL SYSTEMSFACTORY SERVICE, GENUINE GD PARTS.

5 QUALITY LUBRICANTSE ngineeredSolutionsTurboPakTMA RegenerativeBlower/ vacuum Pump SystemsThe gardner denver full Flow and Half Flow TurboPakTMA is a pre-engineered package including a patented TurboTron blower /vacuumpump assembled with a motor, belt drive and guard on a heavy dutyplatform. The TurboTron is specifically designed to provide continuousflow, pulse-free air and the versatility to perform in numerous air and gasapplications. Its unique capabilities make TurboPak A the choice in applications from wastewater treatment to aeration and landfill gas recovery to chemical tank agitation and vacuum cleaning. Typical industries for the TurboPak include foundries, plating, plastics, pharmaceutical, pulp and paper and printing.

6 Application assistance is available by contacting your local TurboTron representative. KEY FEATURES:POWERFUL Installed as a blower or vacuum pump, the TurboTron features a revolutionary impeller design, achieving multistage compressionwith a single impeller. This design represents the best efficiency in the industry. TurboTron delivers quiet, clean, smooth, pulse-free air with pressures to 13 psig and vacuum to 14 " AND PULSE FREE - Noise and vibration are reduced. Even without an acoustical cover, the typical free field noise level is only 82 dBA at three feet, one TurboTron is virtually maintenance free. There is only one moving part and no timing gears. The high tensile strength aluminum composite housing is corrosion and spark resistant.

7 Non-binding Teflon is used in close tolerance areas. Bearings require only occasional greasing and shaft seals are non-contacting and TurboPak A is the economical and proven way to provide a constant flow of air at varying pressures. TurboTron s revolutionary design,proven dependability and power make this blower / exhauster package the best investment for the most demanding SystemsTURBOPAK A full FLOW SERIES Airflow to 900 scfm Pressure to 13 psig vacuum to 14 "HgTURBOPAK A HALF FLOW SERIES Airflow to 450 scfm Pressure to 13 psig vacuum to 14 "HgWater & Wastewater Treatment SolutionsEngineered SolutionsTurboPak A blower / vacuum Pump SystemFULL FLOWFull Flow ImpellerHalf Flow Impeller1351 TurboTron 053101 6/8/01 11:47 AM Page 2