Example: stock market
Remote Operations Manual - Starkey
• Immunity to ESD levels of +/- 8 kV conducted discharge and +/- 15 kV air discharge. The Remote has a rating of IP 5X per IEC 60529. This means that the Remote is protected from dust. The Remote does not contain any user-serviceable parts. Do not open or modify this device. Do not connect the Remote to any external device.
Tags:
Information
Domain:
Source:
Link to this page:
Related documents
3.3 V powered, 15 kV ESD protected, up to 20 Mbps RS-485 ...
www.farnell.com3.3 V powered, 15 kV ESD protected, up to 20 Mbps RS-485/ RS-422 transceiver Datasheet -production data Features ESD protection – ± 15 kV human body model – ± 8 kV IEC 1000-4-2 contact discharge Operate from a single 3.3 V supply - no charge pump required Interoperable with 5 V logic 1 µA low current shutdown mode max.
MAX3483E/MAX3485E/MAX3486E/MAX3488E/MAX3490E/MAX3491E …
datasheets.maximintegrated.com3.3V-Powered, ±15kV ESD-Protected, 12Mbps and Slew-Rate-Limited True RS-485/RS-422 Transceivers Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
1. General description - NXP
www.nxp.comTransceiver disengages from the bus when not powered up (zero load) 2.3 Protection High ESD handling capability on the bus pins Bus pins protected against transients in automotive environments Transmit Data (TXD) dominant time-out function Bus-dominant time-out function in Standby mode Undervoltage detection on pins VCC and VIO
System Level ESD Expanded - JEDEC
www.jedec.orgModel IEC system level ESD Human Body Model (HBM) Environment End customer’s normal operation Factory assembly Standard example Test IEC 61000-4-2 (Powered) ISO 10605 (Unpowered / Powered) JS-001-2013 (Unpowered only) R-C network Peak current 3.75 A / kV 0.7 A / kV Typical requirement 8 KV 1 KV (Formerly 2kV)
AN048 The Basic Principles of Electrical Overstress (EOS)
dammedia.osram.infoMany OSRAM Opto Semicond uctors LEDs have ESD pr otection devices that are meant to protect the LED from ESD even ts. OSRAM Opto Semiconductors latest products are protected up to 8 kV HBM (human body mode l) or up to 15 kV acc. to IEC 61000-4-2 (air discharge). Features SYNIOS® P 2720: • Package: SMD epoxy package • Technology: UX:3
MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E …
datasheets.maximintegrated.comHuman Body Model ±15 IEC 1000-4-2 Air-Gap Discharge ±15 kV IEC 1000-4-2 Contact Discharge ±8 www.maximintegrated.com Maxim Integrated │ 3 MAX3222E/MAX3232E/ MAX3237E/MAX3241E/ MAX3246E ±15kV ESD-Protected, Down to 10nA, 3.0V to 5.5V, Up to 1Mbps, True RS-232 Transceivers Electrical Characteristics (continued)
TJA1040 High speed CAN transceiver
www.nxp.compowered networks. QUICK REFERENCE DATA ORDERING INFORMATION SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage operating range 4.75 5.25 V ICC supply current standby mode 5 15 µA VCANH DC voltage on pin CANH 0 < VCC < 5.25 V; no time limit −27 +40 V VCANL DC voltage on pin CANL 0 < VCC < 5.25 V; no time limit −27 …
1794-TD014A-EN-P 1794 FLEX I/O Communication Adapters ...
literature.rockwellautomation.comESD immunity IEC 61000-4-2: 6 kV contact discharges 8 kV air discharges Radiated RF immunity IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80… 2000 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz 3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz EFT/B immunity IEC 61000-4-4:
SurfLink Remote Control Operations Manual
starkeypro.com• Immunity to ESD levels of +/- 8 kV conducted discharge and +/- 15 kV air discharge. Hereby, Starkey Hearing Technologies declares that the products listed above are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity