1 RENOLIN CLP (High Performance CLP/CKC Gear Oils) Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal.
2 The RENOLIN CLP gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CLP products can be classified as CKC lubricating oils according to ISO 6743-6& CLP as per DIN 51517part 3 The special characteristics of RENOLIN CLP Series lubricants are : High pressure absorption and excellent wear protection Good viscosity-temperature behaviour and excellent low-temperature characteristics Good corrosion protection for steel and nonferrous metals Good resistance to ageing Good compatibility with sealing materials Low foaming Avoidance of frictional vibration by the use of surface-active additives Good demulsification characteristics Multipurpose applications Application.
3 RENOLIN CLP Series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures upto 120oC. The use of these oils guarantees the quiet and smooth running of machinery alongwith optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this Series of oils can be used to rationalize oil stocks.
4 This oils are approved by major OEMs like Flender,Elecon , Shanti gears as well as internatioanl OEMs like David brown. Jan 01, 2003 Contd. on Page 2 Page 1 RENOLIN CLP Typical data: RENOLIN CLP Product Name 22 32 46 Lubricating oil type acc. to ISO 6743-6 CKC22 CKC32 CKC 46 acc. to DIN 51 502 CLP 22 CLP32 CLP46 Characteristics Unit ASTM Test Method Kinematic viscosity at 40oC mm2/s 32 47 at 100oC mm2/s D 445 Viscosity Index 105
5 114 109 D 2270 Density at 15oC g/ml D 1298 Flash point, Cleveland open cup oC 165 188 210 D 92 Neutralisation no mg KOH/g D 974 Typical data: RENOLIN CLP Product Name 68 100 150 220 320 460 Lubricating oil type acc. to ISO 6743-6 CKC68 CKC100 CKC150 CKC220 CKC320 CKC460 acc.
6 To DIN 51 502 CLP 68 CLP100 CLP150 CLP220 CLP320 CLP460 Characteristics Unit ASTM Test Method Kinematic viscosity at 40oC mm2/s 68 100 150 220 320 460 D 445 at 100oC mm2/s Viscosity Index 100 98 97 94 92 90 D 2270 Density at 15oC g/ml D 1298 Flash point, Cleveland open cup oC 220 225 230 230 240 245 D 92 Neutralisation no mg KOH/g D 974 Jan 01, 2003