REPORT DOCUMENTATION PAGE Form Approved

1 REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for information on Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302.

2 Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 10- 1 1-2011 2. REPORT TYPE Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Test Operations Procedure (TOP ) 01-2- 620 High-Altitude Electromagnetic Pulse (HEMP) Testing 5a. CONTRACT NUMBER 5b.

3 GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHORS 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Survivability, Vulnerability & Assessment Directorate (TEDT-WSV-ED) US Army White Sands Missile Range White Sands Missile Range, NM 88002-5158 8. PERFORMING ORGANIZATION REPORT NUMBER TOP 01-2- 620 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Range Infrastructure Division (CSTE-TM ) US Army Test and Evaluation Command 2202 Aberdeen Boulevard Aberdeen Proving Ground, MD 21005-5001 10.

4 SPONSOR/MONITOR S ACRONYM(S) 11. SPONSOR/MONITOR S REPORT NUMBER(S) Same as item 8 12. DISTRIBUTION/AVAILABILITY STATEMENT Distribution Statement A. Approved for public release; distribution unlimited. 13. SUPPLEMENTARY NOTES Defense Technical Information Center (DTIC), AD No.: 14. ABSTRACT This TOP provides methods for planning, providing instrumentation, and execution of testing Army/DOD equipment to determine the effects of Horizontal Component High Altitude Electromagnetic Pulse (HEMP) environment.

5 The content includes facilities, instrumentation setup, new testing procedures, actual environmental considerations, and data recording and presentation of results. P hotos of recommended test equipment and test setups are included, along with some representative data plots. This document incorporates the requirements of MIL-STD -464C and MIL- STD -2169B, which provide DOD EMP guidance. 15. SUBJECT TERMS High -Altitude Electromagnetic Pulse Horizontal Electromagnetic Pulse Nuclear Weapons Effect Testing and Environments 16.

6 SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 58 19a. NAME OF RESPONSIBLE PERSON a. REPORT B. ABSTRACT C. THIS PAGE Uncl assified Unclassified Unclassified 19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18 (This page is intentionally blank.) ARMY TEST AND EVALUATION COMMAND TEST OPERATIONS PROCEDURE *Test Operations Procedure 01-2-620 10 November 2011 DTIC AD No.

7 HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) TESTING Page Paragraph 1. SCOPE .. 2 2. FACILITIES AND INSTRUMENTATION .. 2 Facilities .. 2 Instrumentation .. 4 HEMP Pre/Post Test Illuminations .. 6 3. REQUIRED TEST CONDITIONS .. 6 Test Preparation .. 7 Test Execution .. 9 Test Reporting and Life-Cycle of Survivability Programs .. 10 4. TEST PROCEDURES .. 12 Test System .. 12 Baseline System Under Test .. 12 Test Setup .. 13 Test .. 13 5.

8 DATA REQUIRED .. 13 6. PRESENTATION OF DATA .. 15 Data Appropriation and Compliance .. 15 Data Reduction .. 16 Data Presentation .. 16 APPENDIX A. ELECTROMAGNETIC ENVIRONMENTAL AND EFFECTS .. A-1 B. SAMPLE DETAILED TEST PLAN .. B-1 C. DATA TABLES AND DOCUMENTATION .. C-1 D. HPD II E-FIE LD PROPAGATION CHARACTERISTICS .. D-1 E. OVERVIEW OF HEMP TEST INSTRUMENTATION AND MATHEMATICS .. E-1 F. ABBREVIATIONS .. F-1 G. GLOSSARY .. G-1 H. REFERENCES .. H-1 Approved for public release; distribution unlimited.

9 TOP 01-2-620 10 November 2011 2 1. SCOPE. This Test Operations Procedure (TOP) is a general outline on test procedures required to determine the effects of a specified High -Altitude Electromagnetic Pulse (HEMP) environment on Army and/or Department of Defense (DoD) equipment. The purpose of these test and analysis procedures is to ascertain the degree to which the Operational Requirements Document (ORD), Concept of Operation (CONOPS), Capability Development Document (CDD), Capability Performance Document (CPD), Army Regulation (AR) 70-751, Independent Evaluation Plan (IEP)/Independent Assessment Plan (IAP) criteria, and US Army Nuclear Hardening Criteria (NHC) are met.

10 Army materiel can consist of complete end items, subsystems, line replaceable units (LRUs), components or piece-parts of major systems. All materiel must be tested and analyzed to its NHC with respect to the performance of all its mission essential functions. Realistic hardware, and practical test configurations and scenarios must be tested and analyzed in order to achieve an accurate and complete Electromagnetic Pulse (EMP ) Survivability Test and Assessment (STA). All EMP ST As must include a three phase approach in order to meet the requirements of Department of Defense Directive (DODD) , AR70-75, and its NHC.