Request for Quotation Survey

1 Request for Quotation SurveyOrion Project #: Date:Orion Regional Sales ManagerQuote Needed By: Estimated PO Date:Budgetary Quote Updated Request for Quote/Requote #:Firm Quote Order In House - Purchase Order #:List any special instructions or additional information on this RFQ (In place of separate Email):nFirm Quote Request -- Requires ALL sections to be completednBudgetary Quote Request -- See section headings for instructionsnRed Outlined Boxes MUST be completednReset button at end of form will clear ALL previously entered informationIMPORTANT: In order for Orion Packaging Systems to provide a thorough analysis of yourapplication, please complete the following Survey as accurately as possible. The informationprovided in this document will be used to determine the appropriated Orion model and options required for the Packaging Systems l 4750 County Rd 13 NE, Alexandria, MN l (800) 535-2730 l Fax (901) 365-1071 E-mail: l Web: System RFQ SurveyCustomer InformationCompany:Address:City:State:Zi p:Telephone:Fax:Email:Contact:Title:Sign ature: Distributor InformationCompany:Address:City:State:Zi p:Telephone:Fax:Email:Contact:Title:Sign ature:Model of Orion stretch wrapper under consideration (if known):List any known options required for this application:What is the scope of the project or the objective?

2 :Load InformationPage 2 Load SizeWidthLengthHeightWeightMinimumMaximu m*Load width is considered to be across the conveyor. Length is considered to be in the flow direction. Does the load overhang the pallet? Yes No If Yes, how many inches per side overhang? Minimum: Maximum:Does the load underhang the pallet? Yes No If Yes, how many inches per side underhang? Minimum: Maximum: Load Type: Stable Somewhat Stable Unstable (Orion highly recommends load testing prior to shipment)The load is composed of: Boxes Bags Mixed Other (describe)Is the load: Column Stacked Interlocked Other (describe)Describe the product ( , bottled liquids, boxed glassware, etc.) What colors are the product loads? (Some dark colors such as black, green etc., are not compatible with infrared photocells.)

3 In such cases, reflex photocells or ultrasonic detection devices may need to be considered).Material HandlingType of material handling equipment to be used to load and unload the system: Forklift Dual Forklift Clamptruck (full load)Electric Walkie Pallet Jack Push/pull (for slip sheets) AGV s Other:Pallet DescriptionIndicate pallet type(s):4-way notched stringer 4-way blockDouble-face non-reversible CHEPD ouble-face reversible Double-wing reversible Single-wing non-reversible PostalOrion System RFQ SurveyPallet Bottom BoardsNumber of bottom boards: General condition: Dimensions of bottom boards ( , 48 long x 5 wide): Do the bottom boards run:Parallel to the flow direction Perpendicular to the flow direction Page 3 Pallet or skid size (no load)Width*Length*HeightMinimumMaximum*L oad width is considered to be across the conveyor.

4 Length is considered to be in the flow direction. Orion System RFQ SurveySlip Sheet InformationAre slip sheets needed? Yes No Is a pallet used under the slip sheet? Yes No Composition of slip sheet: Corrugated Chip board Other (describe)Are there tabs on the slip sheets? Yes No If Yes, tab width? (If folded, will require further evaluation/discussion)Where are the tabs located in relation to the flow direction? Leading Edge Trailing edgeClamp side Non-clamp sideAre the tabs to be wrapped with the load during the cycle? Yes NoProduction RequirementsWrapping RequirementsNumber of bottom wraps: Number of top wraps: Inches of film overwrap at the top of the load: Inches of film spiraled overlap: Is the pallet to be wrapped with the load? Yes No Is a top sheet dispenser (poly) or topboard applicator (corrugated) required?

5 Yes No For top sheet dispenser: Dust resistance only (apply top sheet, stretch wrap load)Moisture & dust resistant (stretch wrap to top, apply top sheet, continue wrap)Is a top platen required to stabilize the loads during wrapping? Yes No Note: Use of a top platen will reduce maximum system throughput & AirWhat power supply is available? 480 / 3 / 60 (standard) Other (describe) Available air supply (minimum of 80 PSI, 6 CFM will be required):PSICFMIs any non-standard NEMA rating required for the system (NEMA 12 is standard)? No Yes (describe):Is there a UL requirement? No Yes (describe):Environmental Factors of Machine (Not required for Budgetary Quote)Location: Enclosed Building Open-sided Building Outdoors Other environmental conditions: Are there any special environmental considerations such as: MoistureDustCorrosiveWash-downCold room Freezer OtherSite temperature: F max.

6 F min. F typical Site humidity: % max. % min. % typical Ceiling height clearance:Page 4 Dimensions of slip sheet(including tabs, if any)WidthLengthMinimumMaximumProduction capacity requiredLoads per HourNormal productionPeak productionOrion System RFQ SurveyStretch FilmWhat stretch film will be used? Is it a specialty film? Yes NoIf Yes, please describe and provide samples for testing: Gauge/mil. Roll Diameter Web Width Roll Weight Cast Blown One-sided cling Two-sided clingWe strongly suggest that sample film be supplied for testing. Performance is based on a 55-90 gauge cast stretch film, any film gauge out of this range may affect the performance and may require special options to be InformationThe basic Orion system includes a 5 infeed conveyor and a 5 exit conveyor. Additional conveyor is quoted in standard 5 many (if any) additional sections of conveyor are required?

7 Infeed Conveyor: Powered 5 sections:Exit Conveyor: Powered 5 sections: Gravity 5 sections:Will end stop be required on Exit conveyor? Yes NoType and size of conveyor desired: Standard ELITE conveyor Xtra Duty conveyor diameter rollers on center, 4,500 lb. capacity diameter rollers on centers, 6,000 lb. capacityExisting Equipment (Not required for Budgetary Quote)Which existing equipment (if any) will be used in conjunction with the proposed Orion system? Conveyor Type Powered Idle roller Roller .. Diameter: Centers: Belt .. Width: Drag chain .. Size: Mesh .. Width: Other: To be used as: Infeed conveyor Exit conveyorPass height from floor to top of conveying surface:Effective width: Outside frame width: For a conveyor to be used as a direct infeed/exit conveyor for a turntable model, is the conveyor: Contoured Straight Conveyor speed in feet per minute: Is the speed variable?

8 Yes NoPage 5 Orion System RFQ SurveyPage 6 Infeed / Loading ConsiderationsIs the system is fed by a palletizer or upstream conveyor? Infeed interlock?For FORKLIFT Loading: Forklift loaded on the END of the infeed conveyor? Yes NoForklift loaded on the SIDE of the infeed conveyor? Yes No (conveyor extension or second exit conveyor is required)Forklift wheel stop required? Yes NoForklift sensing photocell required? Yes NoExit / Unloading ConsiderationsSystem is UNLOADED by: Downstream POWER conveyor Exit Interlock Downstream GRAVITY conveyor Gravity Full Photocell Forklift pick-up End StopFor FORKLIFT Unloading: Forklift unloaded from the END of the Exit Conveyor Forklift unloaded from the SIDE of the Exit Conveyor (conveyor extension or second exit conveyor is required) Forklift wheel stop required?

9 Yes No Forklift sensing photocell required? Yes NoFlow Direction Conveyor Loading (Not required for Budgetary Quote)Indicate flow direction by checking one of the flow patterns listed below: For Turntable SystemsLeft to Right (standard) Right to Left (optional) Front to Left (optional) Front to Right (optional) Right to Front (optional) Left to Front (optional)Indicate flow direction by checking one of the flow patterns listed below: For Rotary Tower SystemsLeft to Right (standard) Right to Left (optional) Orion System RFQ SurveyPage 7 LEFTLEFTRIGHTRIGHTFRONTU sing the letters above, indicate the locations atwhich loads will be loaded and unloaded on theOrion system conveyor:Using the letters above, indicated the locations at which loads will be loaded and unloaded on the Orion system :Unloaded:Loaded:Unloaded.

10 Orion System RFQ SurveyAutomatic Palletizer (Not required for Budgetary Quote)Will the stretch wrapper be interfaced with a palletizer? Yes No (If no, Survey is ready for submission) Palletizer discharge conveyor pass height in inches: Palletizer discharge conveyor speed in feet per minute: Is the discharge speed: Variable FixedDoes the discharge speed fluctuate? Yes NoWhich way are the loads justified upon discharge?Justified LEFT CENTERED Justified RIGHTWill the palletizer discharge partial loads? Yes No If Yes, will the partial loads be: Wrapped Bypassed (Partial loads must meet the minimum load parameters of the system. If the loads are to be bypassed, customer must supply the bypass signal and the wrapper must have bypass logic).InstallationInstallation to be done by: End User Outside contractorStart-up to be done by: Orion Orion distributorIn plant technical abilities: Skilled Electrician Yes No Skilled mechanical Yes No Skilled PLC programmer Yes NoShip via Orion s recommended carrier: Customer will arrange for pick-up: (Requires air-ride trailer and bolt-to-floor) Export crating required:Special Instructions:Page 8 PalletizerPalletizerPalletizerMachine Shipping ConsiderationsOrion System RFQ SurveyMachine Shipping ReleaseFOB: Alexandria, MNIn shipping of Brenton/Orion/Currie equipment, we kindly Request that our customer use our contract are as must ship on air ride trailer with wooden floors and logistics capability.