REVISION FR TFM-1XX-XX-XXX-D-XXX-X-XX C - Samtec

1 REVISION FR. NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. TFM-1XX-XX-XXX-D-XXX-X-XX PACKAGING. 2. MINIMUM PUSHOUT FORCE FOR CONTACTS, WELD TABS, C BLANK: TUBES(SEE NOTE 15 & 16). AND THREADED INSERTS: 12 OZ. No OF POSITIONS -TR: TAPE AND REEL (SEE FIG 4, SHT 7). 3. MINIMUM LOCKING CLIP RETENTION: 8 OZS. (NOT AVAILABLE WITH -DS OPTION OR. LEAD STYLE -01, -02, -03: -02 THRU -50 (ALL THROUGH HOLE LEAD STYLE). DO NOT 4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[ ] POSITIONS AVAILABLE). SCALE FROM 5. MAXIMUM TERMINAL BURR: .003[ ] (SEE NOTES 14,16 & 17).

2 THIS PRINT LEAD STYLES -11, -12, -13: (-05 THRU -50 MULTIPLES OF 5) -FR: FULL REEL QTY. TAPE & REEL. 6. COPLANARITY: .004[ ] = POS 02 THRU 26 POSITIONS 12, 16, 17 ALSO AVAILABLE (NOT AVAILABLE WITH -DS OPTION OR..006[ ] = POS 27 THRU 50 C. LEAD STYLES -21, 22, 23: (-05 THRU -50 MULTIPLES OF 5) T. H. LEAD STYLE)(SEE NOTES 14, 16 & 17). 7. MEASURED FROM BEND. POSITIONS 12 & 13 ALSO AVAILABLE. 8. DIMENSION CHANGED PER REVISION AD. CONTACT ENGINEERING LEAD STYLES 31, 32: 12 POSITION ALSO AVAILABLE PICK AND PLACE OPTION. FOR INFORMATION. -P: PICK AND PLACE PAD (USE PPP-04).

3 9. MEASURE FROM TIPS OF PIN. (AVAILABLE IN ALL POSITIONS -05 THRU. 10. NOTE DELETED. LEAD STYLE -50 EXCEPT -05 WITH -WT). 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, (NOT AVAILABLE FOR -RA OR -REX, THROUGH HOLE SURFACE MOUNT SEE FIG 7, SHT 3). THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. Samtec -01, -03 (SEE FIG 1) -02 (SEE FIG 2) -K: POLYIMIDE FILM (SEE FIG 3, SHT 2). RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -11, -13 (SEE FIG 1) -12 (SEE FIG 2) (USE ). LC OPTION. -21,-23 (SEE FIG 1) -22 (SEE FIG 2) (NOT AVAILABLE FOR -RA OR -REX).

4 12. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01, -02 & -03 -31 (SEE FIG 1) -32 (SEE FIG 2). WILL BE SOLID AND WITHOUT SIDE SLOTS. OPTION (ALL LEAD STYLES EXCEPT -21 AVAILABLE). -A: ALIGNMENT PIN (USE TFM-XX-D-XX-A, 13. NOTE DELETED. PLATING SPECIFICATION SEE TABLE 1) (SEE FIG 8, SHT 3). 14. NOT ALL PARTS FOLLOW EIA-481 ORIENTATION IN THE T&R POCKET. -S: 30 " SELECTIVE GOLD ON CONTACT AREA, (NOT AVAILABLE FOR -RA OR -REX). 15. TUBES ARE STANDARD PACKAGING. MATTE TIN TAIL -LC: LOCKING CLIP (USE LC-05-TM). 16. ORDERS WILL BE PACKAGED ACCORDING TO THE Samtec PACKAGING -L: 15 " SELECTIVE GOLD ON CONTACT AREA, (NOT AVAILABLE FOR -RA OR -REX).

5 EFFICIENCY STANDARDS (SPES) FOUND ON MATTE TIN TAIL (SEE FIG 10, SHT 3 & NOTES 3 & 11). 17. ATTACH LABEL TO EACH REEL. -F: 3 " FLASH GOLD ON CONTACT AREA, -RA: RIGHT ANGLE(AVAILABLE ONLY IN LEAD STYLE: -01. (No OF POSITIONS x .050[ ]) + .125[ ] REF MATTE TIN TAIL SEE FIG 5, SHT 2). -H: 30 " SELECTIVE GOLD ON CONTACT AREA, -SA: STAKED ALIGNMENT PIN (SEE FIG 9, SHT 3). (No OF POSITIONS x .050[ ]) + .025[.64] REF 3 " FLASH GOLD ON TAIL (ONLY AVAILABLE ON SURFACE MOUNT LEAD STYLE). -SM: 30 " SELECTIVE GOLD ON CONTACT AREA, -WT: WELD TABS (USE WT-25-XX-T).

6 02 .110 REF MATTE TIN TAIL (AVAILABLE ON -01, -02 & -03 LEAD. -LM: 15 " SELECTIVE GOLD ON CONTACT AREA, STYLES ONLY) (SEE FIG 6, SHT 2). MATTE TIN TAIL (MATES WITH SFSS/SFSD -SR & -DR ONLY)..155 -FM: 3 " FLASH GOLD ON CONTACT AREA, (NOT AVAILABLE WITH -A, -LC, REF MATTE TIN TAIL -RA, OR -SA OPTIONS). -STL: 30 " SELECTIVE GOLD ON CONTACT AREA, -RE1: RIGHT ANGLE ELEVATED .062 PCB. TIN/LEAD (90/10 5%) TAIL (USE TFM-XX-D-01-RE, NOT AVAILABLE. 01 .050 WITHOUT -WT, AVAILABLE IN LEAD..225 STYLE -01 ONLY, -03 THRU -50 POS)..075 REF BODY SPECIFICATION (MATES WITH SFSS/SFSD -SR & -DR ONLY).

7 REF REF -D: DOUBLE ROW (SEE FIG 11, SHT 4). C -RE2: RIGHT ANGLE ELEVATED .093 PCB..050 (USE TFM-XX-D-01-RE, NOT AVAILABLE. (No OF POSITIONS x .050[ ]) - .050[ ] "D" REF WITHOUT -WT, AVAILABLE IN LEAD. (SEE TABLE 1, 2 MAX SWAY STYLE -01 ONLY, -03 THRU -50 POS). (EITHER DIRECTION) (MATES WITH SFSS/SFSD -SR & -DR ONLY)..018 REF SHT 7) (SEE FIG 11, SHEET 4). 2 MAX SWAY .135 REF. -SN: SOLDER NAIL FOR .062 BOARD. "A" (EITHER DIRECTION) (TFM-XX-D-01-SN AND WT-27-01-T). (SEE FIG12, SHT 3)..096 (ONLY AVAILABLE WITH -02 LEAD STYLE). "A" REF .1635 (NOT AVAILABLE WITH OPTIONS -A, -LC, (SEE NOTE 8) -RA, -SA, -WT, -RE1 OR -RE2).

8 (SEE TABLE 1, REF -SN2: SOLDER NAIL FOR .093 BOARD. SHT 7) (TFM-XX-D-01-SN AND WT-27-02-T). (SEE FIG12, SHT 3). (ONLY AVAILABLE WITH -02 LEAD STYLE). SEE NOTE 12 (NOT AVAILABLE WITH OPTIONS -A, -LC, -RA, -SA, -WT, -RE1 OR -RE2)..014 REF .010 REF C -DS: DUAL SCREW DOWN FOR .062 BOARD. "A" .050 (SEE FIG 18, SHT 5). 2 MAX SWAY C (ONLY AVAILABLE WITH -01 & -02 LEAD STYLE). (EITHER DIRECTION) 2 MAX SWAY (NOT AVAILABLE WITH OPTIONS -A, -LC, -P, "J" .003 [ ] (EITHER DIRECTION) -RA, -TR, -SA, -K, -WT, -RE1, -RE2, -SN, -SN2). C (SEE TABLE 1, SHT 7) SECTION "A"-"A" (-01 LEAD STYLE USES TFM-XX-D-01-DSL.)

9 & T1-M2-4-VSFM-T, 02 LEAD STYLE USES. (No OF POSITIONS x .050[ ]) - .050[ ] TFM-XX-D-01-DSA & T1-M2-4-VSFM-T). C UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE *. DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND. PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS. FIG 1 DECIMALS ANGLES. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY Samtec , INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE. THROUGH HOLE .XX: .01[ ] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR. 520 PARK EAST BLVD, NEW ALBANY, IN 47150.

10 -01, -03, -11, -13, -21, -23, -31 .XXX: .005[ ] REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY. PHONE: 812-944-6733 FAX: 812-948-5047. "C" .003 [ ] C . xxxx : .0020[ ] OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS. WRITTEN CONSENT OF Samtec , INC. e-Mail code 55322. (SEE TABLE 1, SHT 7) MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: :1 DESCRIPTION: (APPLY FOR BOTH ROWS) INSULATOR: .050 X .050 TERMINAL STRIP. LCP, UL 94-VO. DWG. NO. COLOR: BLACK. TERMINAL: PHOSPHOR BRONZE TFM-1XX-XX-XXX-D-XXX-X-XX . IN-PROCESS F:\DWG\MISC\MKTG\ BY: garyp 11/5/2014 SHEET 1 OF 7.