Safety Data Sheet

1 SIGMA-ALDRICH Material Safety data Sheet Version Revision Date 05/30/2013. Print Date 02/25/2014. 1. PRODUCT AND COMPANY IDENTIFICATION. Product name : Bromine Product Number : 207888. Brand : Sigma-Aldrich Supplier : Sigma-Aldrich 3050 Spruce Street SAINT LOUIS MO 63103. USA. Telephone : +1 800-325-5832. Fax : +1 800-325-5052. Emergency Phone # (For : (314) 776-6555. both supplier and manufacturer). Preparation Information : Sigma-Aldrich Corporation Product Safety - Americas Region 1-800-521-8956. 2. HAZARDS IDENTIFICATION. Emergency Overview OSHA Hazards Target Organ Effect, Highly toxic by inhalation, Corrosive Target Organs Nerves., LungsNerves., Lungs GHS Classification Acute toxicity, Oral (Category 5).

2 Acute toxicity, Inhalation (Category 1). Skin corrosion (Category 1A). Serious eye damage (Category 1). Acute aquatic toxicity (Category 1). GHS Label elements, including precautionary statements Pictogram Signal word Danger Hazard statement(s). H303 May be harmful if swallowed. H314 Causes severe skin burns and eye damage. H330 Fatal if inhaled. H400 Very toxic to aquatic life. Precautionary statement(s). P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P284 Wear respiratory protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.

3 Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/ physician. Sigma-Aldrich - 207888 Page 1 of 8. HMIS Classification Health hazard: 3. Chronic Health Hazard: *. Flammability: 0. Physical hazards: 0. NFPA Rating Health hazard: 3. Fire: 0. Reactivity Hazard: 0. Special hazard.: OX. Potential Health Effects Inhalation May be fatal if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract. Skin May be harmful if absorbed through skin. Causes skin burns. Eyes Causes eye burns. Causes severe eye burns. Ingestion May be harmful if swallowed.

4 3. COMPOSITION/INFORMATION ON INGREDIENTS. Formula : Br2. Molecular Weight : g/mol Component Concentration Bromine CAS-No. 7726-95-6 <=100%. EC-No. 231-778-1. Index-No. 035-001-00-5. 4. FIRST AID MEASURES. General advice Consult a physician. Show this Safety data Sheet to the doctor in out of dangerous area. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a rinsing eyes during transport to hospital.

5 If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 5. FIREFIGHTING MEASURES. Conditions of flammability Not flammable or combustible. Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Specific hazards arising from the chemical Container explosion may occur under fire conditions. Special protective equipment for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Sigma-Aldrich - 207888 Page 2 of 8. Hazardous combustion products Hazardous decomposition products formed under fire conditions.

6 - Hydrogen bromide gas Hazardous decomposition products formed under fire conditions. - Hydrogen bromide gas Further information May intensify fire; oxidiser. 6. ACCIDENTAL RELEASE MEASURES. Personal precautions Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.

7 7. HANDLING AND STORAGE. Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Conditions for safe storage Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Do not store in polyethylene containers. Handle and open container with care. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION. Components with workplace control parameters Components CAS-No. Value Control Basis parameters Bromine 7726-95-6 TWA ppm USA. ACGIH Threshold Limit Values (TLV). Remarks Upper Respiratory Tract irritation Lower Respiratory Tract irritation Lung damage STEL ppm USA.

8 ACGIH Threshold Limit Values (TLV). Upper Respiratory Tract irritation Lower Respiratory Tract irritation Lung damage TWA ppm USA. OSHA - TABLE Z-1 Limits for Air Contaminants - mg/m3 STEL ppm USA. OSHA - TABLE Z-1 Limits for Air Contaminants - 2 mg/m3 TWA ppm USA. Occupational Exposure Limits (OSHA) - Table Z-1. mg/m3 Limits for Air Contaminants The value in mg/m3 is approximate. TWA ppm USA. NIOSH Recommended Exposure Limits mg/m3. ST ppm USA. NIOSH Recommended Exposure Limits 2 mg/m3. Sigma-Aldrich - 207888 Page 3 of 8. Personal protective equipment Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup to engineering controls.

9 If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Fluorinated rubber Minimum layer thickness: mm Break through time: 480 min Material tested:Vitoject (KCL 890 / Aldrich Z677698, Size M).

10 Splash contact Material: Fluorinated rubber Minimum layer thickness: mm Break through time: 480 min Material tested:Vitoject (KCL 890 / Aldrich Z677698, Size M). data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail test method: EN374. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and Safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.