SAFETY DATA SHEET BELZONA® 1111 …

1 Revision Date 10-12-2013 SDS No. 11301 SAFETY DATA SHEET BELZONA 1111 (SUPERMETAL) BASEA ccording to Regulation (EU) No 453/2010 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE Product identifierProduct nameBELZONA 1111 (SUPERMETAL) BASEI nternal Relevant identified uses of the substance or mixture and uses advised againstIdentified usesEngineering grade repair system for repairing and rebuilding machinery and equipment. For industrial use advised againstThe product should not be used for purposes other than those recommended in the appropriate Instructions For Use (IFU) Details of the supplier of the SAFETY data sheetBelzona Polymerics LimitedSupplierClaro Road, HarrogateNorth YorkshireHG1 4DS, England +44 (0) 1423 567641+44 (0) 1423 Emergency telephone number+44 (0) 1423 567641 (office hours: 0845-1715 GMT) SECTION 2: HAZARDS Classification of the substance or mixtureClassification (1999/45/EEC)Xi;R36/38.

2 R43. N;R51 full text for all R-Phrases is displayed in Section Label elementsContainsEPOXY RESIN (Number average MW <= 700 )LabellingIrritantDangerous for the environmentRisk PhrasesR36/38 Irritating to eyes and cause sensitisation by skin to aquatic organisms, may cause long-term adverse effects in the aquatic PhrasesP5 Contains epoxy constituents. See information supplied by the suitable protective clothing and material and its container must be disposed of as hazardous No. 11301 BELZONA 1111 (SUPERMETAL) BASES61 Avoid release to the environment. Refer to special instructions/ SAFETY data Other hazardsNot applicable SECTION 3: COMPOSITION/INFORMATION ON MixturesEPOXY RESIN (Number average MW <= 700 )10-30%CAS-No.

3 : 25068-38-6EC No.: 500-033-5 Classification (67/548/EEC)R43 Xi;R36/38 N;R51/53 Classification (EC 1272/2008)Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Skin Sens. 1 - H317 Aquatic Chronic 2 - H411 Registration Number: 01-2119456619-26-xxxxThe Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16. SECTION 4: FIRST AID Description of first aid measuresGeneral informationIn all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious to fresh air. Keep the patient warm and at rest. If breathing has stopped, administer artificial respiration. Give nothing by mouth. If unconscious, place in the recovery position and seek medical accidentally swallowed obtain immediate medical attention.

4 Keep at rest. Rinse mouth with plenty of water. Do NOT induce contactRemove contaminated clothing. Wash skin thoroughly with soap and water or use a proprietary skin cleaner. Do NOT use solvents or thinners. If irritation or inflammation persists, seek medical contactContact lenses should be removed. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart, and seek medical Most important symptoms and effects, both acute and delayedSkin contactProlonged or repeated contact with the skin or mucous membrane may result in irritant symptoms such as redness, blistering or dermatitis. Onset of symptoms may be delayed. May cause allergic skin contactIrritating to Indication of any immediate medical attention and special treatment neededNone.

5 SECTION 5: FIREFIGHTING Extinguishing mediaExtinguishing mediaUse: sand, foam, carbon dioxide, chemical powder or water fog for larger fires. Do NOT use water Special hazards arising from the substance or mixture82/SDS No. 11301 BELZONA 1111 (SUPERMETAL) BASEH azardous combustion productsIn a fire, hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide may be Advice for firefightersSpecial Fire Fighting ProceduresFire will produce dense black smoke containing hazardous products of combustion. Exposure to decomposition products may be a hazard to health. Appropriate self-contained breathing apparatus may be required. Cool closed containers exposed to fire with water spray.

6 Do not allow run-off from fire fighting to enter drains or watercourses. SECTION 6: ACCIDENTAL RELEASE Personal precautions, protective equipment and emergency proceduresAvoid contact with skin and Environmental precautionsPrevent product entering drains or sewers. If the product enters drains or sewers in large quantities, the local Water Company should be contacted immediately; in the case of contamination of streams, rivers or lakes, the appropriate National regulating Methods and material for containment and cleaning upScrape the majority of the product into a suitable labelled container. Cover the spill area with sand or other suitable inert material and sweep up into the container.

7 Clean surfaces down with a water and detergent mixture. Do not allow spilled product or the associated washings to enter surface water drains or Reference to other sectionsFor personal protection, see section 8. For waste disposal, see section 13. For information on National regulating agencies refer to Section 16. SECTION 7: HANDLING AND Precautions for safe handlingGENERAL Vapours may collect in the container headspace during transit or prolonged storage. Avoid the inhalation of vapour when opening the container. Where possible open containers and mix components in a well ventilated place away from the application area. Avoid skin and eye contact. Smoking, eating and drinking should be prohibited in areas of storage and use.

8 For personal protection see Section 8. Always keep in containers made of the same material as the supply container. Good housekeeping methods and regular safe removal of waste materials should be observed. The Manual Handling Operations Regulations may apply to the handling of containers/packages of this product. Refer to the guide weight on the container/package when carrying out assessments. FIRE/EXPLOSION This product is combustible. Exclude sources of heat, sparks and open flame. Ensure emergency equipment (for fires, spills, leaks, etc.) is readily Conditions for safe storage, including any incompatibilitiesObserve the label precautions. Store between 5 C and 30 C unless otherwise stated in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.

9 No smoking. Prevent unauthorised access. Store separately from oxidising agents and strongly alkaline and strongly acidic materials. ENVIRONMENTAL STORAGE PRECAUTIONS Spillage, incorrect storage of chemicals or waste materials or unsuitable disposal activities can result in pollutants seeping through the soil, causing serious harm to groundwater- which is a vital source of drinking water. All wastes especially liquid wastes, must be securely stored on site in designated areas that are isolated from surface drains and bunded to contain any ClassThe principals contained in the HSE guidance note Chemical Warehousing: storage of packaged dangerous substances (HSG71) should be observed when storing this Specific end use(s)Application by plastic applicator or spatula provided.

10 Mix with Solidifier component before use. Please refer to the relevant Belzona Instructions For Use for further information. SECTION 8: EXPOSURE CONTROLS/PERSONAL Control parameters83/SDS No. 11301 BELZONA 1111 (SUPERMETAL) BASEI ngredient CommentsWhen personal protective equipment, including respiratory protective equipment, is used to control exposure to hazardous substances it must be selected to meet the requirements of the COSHH Exposure controlsEngineering measuresOpen containers in a well ventilated equipmentRespiratory protection is not normally required but it may be required when this product is used in confined spaces or where adequate ventilation cannot be protectionGENERAL GUIDANCE ON HAND PROTECTION Hand protection should be selected in accordance with EN 374 Protective gloves against chemicals.