Safety Data Sheet - Fisher Sci

1 Safety data Sheetaccording to 29 CFR1910/1200 and GHS Rev. 3 Effective date : 1 of 7 Zinc Sulfate, Reagent Grade,Created by Global Safety Management, Inc. -Tel: 1-813-435-5161 - 1 : Identification of the substance/mixture and of the supplierProduct name :Zinc Sulfate, Reagent Grade,Manufacturer/Supplier Trade name:Manufacturer/Supplier Article number:S25642 Recommended uses of the product and uses restrictions on use:Manufacturer Details:AquaPhoenix Scientific9 Barnhart Drive, Hanover, PA 17331 Supplier Details: Fisher Science Education15 Jet View Drive, Rochester, NY 14624 Emergency telephone number.

2 Fisher Science Education Emergency Telephone No.: 800-535-5053 SECTION 2 : Hazards identificationClassification of the substance or mixture:CorrosiveSerious eye damage, category 1 IrritantAcute toxicity (oral, dermal, inhalation), category 4 Environmentally DamagingAcute hazards to the aquatic environment, category 1 Chronic hazards to the aquatic environment, category 1 Eye Damage 1 Acute Toxicity 4 (oral)Aquatic Acute Toxicity 1 Aquatic Chronic Toxicity 1 Signal word :DangerHazard statements:Causes serious eye damageHarmful if swallowedVery toxic to aquatic lifeVery toxic to aquatic life with long lasting effectsPrecautionary statements:If medical advice is needed, have product container or label at handKeep out of reach of childrenRead label before useDo not eat, drink or smoke when using this productWear protective gloves/protective clothing/eye protection/face protectionSafety data Sheetaccording to 29 CFR1910/1200 and GHS Rev.

3 3 Effective date : 2 of 7 Zinc Sulfate, Reagent Grade,Created by Global Safety Management, Inc. -Tel: 1-813-435-5161 - .. thoroughly after handlingAvoid release to the environmentImmediately call a POISON CENTER or doctor/physicianIF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do continue rinsingRinse mouthIF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwellCollect spillageDispose of contents/container to ..Other Non-GHS Classification:WHMISD2 BNFPA/HMISNFPA SCALE (0-4)HMIS RATINGS (0-4)SECTION 3 : Composition/information on ingredientsIngredients:CAS 7446-20-0 Zinc Sulfate,ACS100 %Percentages are by weightSECTION 4 : First aid measuresDescription of first aid measuresAfter inhalation: Loosen clothing as necessary and position individual in a comfortable tofresh air.

4 Give artificial respiration if immediate medical attention or breathing isdifficult, give skin contact: Wash affected area with soap and water. Rinse area with water for 10-15 medical attention or eye contact: Protect unexposed eye. Rinse/flush exposed eye(s) gently using water for 15-20 contact lens(es) if able to do so during rinsing. Seek medical attention swallowing: Rinse mouth thoroughly. Do not induce vomiting. Seek immediate medical attention exposed individual drink sips of water or data Sheetaccording to 29 CFR1910/1200 and GHS Rev.

5 3 Effective date : 3 of 7 Zinc Sulfate, Reagent Grade,Created by Global Safety Management, Inc. -Tel: 1-813-435-5161 - important symptoms and effects, both acute and delayed:Irritation, Nausea,Headache, Shortness of of eyes . Redness, tearing. Eye Damage;Eye DamageIndication of any immediate medical attention and special treatment needed:If seeking medical attention, provide SDS document to to physician: Treat 5 : Firefighting measuresExtinguishing mediaSuitable extinguishing agents: If in laboratory setting, follow laboratory fire suppression procedures.

6 Useappropriate fire suppression agents for adjacent combustible materials or sources of ignitionFor Safety reasons unsuitable extinguishing agents:Special hazards arising from the substance or mixture:Combustion products may include carbon oxides or other toxic for firefighters:Protective equipment:Additional information (precautions): Move product containers away from fire or keep cool with waterspray as a protective measure, where 6 : Accidental release measuresPersonal precautions, protective equipment and emergency procedures:Wear protective equipment.

7 Avoid contact with skin and eyes, and respiratory protective deviceagainst the effects of fumes/dust/aerosol. Keep unprotected persons away. Ensure adequate from ignition sources. Protect from the spill, if possible. Contain spilled material by diking orusing inert absorbent. Transfer to a disposal or recovery precautions:Prevent from reaching drains, sewer or waterway. Collect contaminated soil for characterization per Section not allow this material to enter the up spills and material for containment and cleaning up:If in a laboratory setting, follow Chemical Hygiene Plan liquids using vacuum or by use ofabsorbents.

8 Place into properly labeled containers for recovery or disposal. If necessary, use trained up spills obey local to other sections:SECTION 7 : Handling and storagePrecautions for safe handling:Prevent formation of aerosols. Follow good hygiene procedures when handling chemical materials. Do not eat,drink, smoke, or use personal products when handling chemical substances. If in a laboratory setting, followChemical Hygiene only in well ventilated splashes or spray in enclosed for safe storage, including any incompatibilities:Store in a cool location.

9 Provide ventilation for containers. Avoid storage near extreme heat, ignition sources oropen flame. Store away from foodstuffs. Store away from oxidizing in cool, dry conditions in wellsealed containers. Keep container tightly 8 : Exposure controls/personal protectionSafety data Sheetaccording to 29 CFR1910/1200 and GHS Rev. 3 Effective date : 4 of 7 Zinc Sulfate, Reagent Grade,Created by Global Safety Management, Inc. -Tel: 1-813-435-5161 - Parameters:No applicable occupational exposure limitsAppropriate Engineering controls:Emergency eye wash fountains and Safety showers should be available inthe immediate vicinity of exhaust ventilation orother engineering controls to keep the airborne concentrations of vaporor mists below the applicable workplace exposure limits (OccupationalExposure Limits-OELs) indicated protection:Not required under normal conditions of use.

10 Use suitable respiratoryprotective device when high concentrations are present. Use suitablerespiratory protective device when aerosol or mist is formed. For spills,respiratory protection may be of skin:The glove material has to be impermeable and resistant to the product/the substance/ the preparation being of the glovematerial on consideration of the penetration times, rates of diffusion andthe protection: Safety glasses with side shields or hygienic measures:The usual precautionary measures are to be adhered to when handlingchemicals.