SAFETY DATA SHEET - Unimed Corp

1 #25619 Page: 1 of 6 Issue date 09-March-2015 SAFETY data SHEET 1. Product and Company Identification Product identifier PDI Sani-Cloth AF3 Germicidal Disposable Wipe SDS 0101-00 Other means of identification Not available Recommended use Hard, Nonporous Surface Disinfectant Recommended restrictions Not a skin wipe. Manufacturer/Importer/Supplier/Distribut or information Manufacturer Company name Address Professional Disposables International, Inc. Two Nice-Pak Park Orangeburg, NY 10962-1376 Telephone Phone (USA) 1-845-365-1700 (M-F 9am - 5pm) E-mail Not available Emergency phone number 1-800-999-6423 2. Hazards Identification Physical hazards Health hazards Environmental hazards OSHA defined hazards Label elements Hazard symbol Not classified. Serious eye damage/eye irritation Not classified. Not classified. None. Category 2B Signal word Warning Hazard statement Causes eye irritation. Precautionary statement Prevention Wash thoroughly after handling.

2 Response If in eyes: Rinse cautiously with water for 15 - 20 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Storage Store away from incompatible materials. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information Not applicable. 3. Composition/Information on Ingredients Mixtures Chemical name Common name and synonyms CAS number % Benzyl-C12-18-alkyldimethyl ammonium chlorides Quaternary ammonium compounds, C12-18-alkyl [(ethylphenyl) methyl] dimethyl, chlorides 68391-01-5 68956-79-6 4. First Aid Measures Inhalation If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist. Skin contact Wash off with soap and water. Get medical attention if irritation develops and persists.

3 Eye contact Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Ingestion Call a poison control center or doctor for treatment advice. #25619 Page: 2 of 6 Issue date 09-March-2015 Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed Exposed individuals may experience eye tearing, redness, and discomfort. Treat patient symptomatically. General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. 5. Fire Fighting Measures Suitable extinguishing media Treat for surrounding material. Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions None known.

4 During fire, gases hazardous to health may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. In the event of fire, cool product with water spray. Specific methods Cool product exposed to flames with water until well after the fire is out. General fire hazards No unusual fire or explosion hazards noted. 6. Accidental Release Measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Wear appropriate protective equipment and clothing during clean-up. For personal protection, see section 8 of the SDS. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewer, basements or confined areas. For waste disposal, see section 13 of the SDS. Environmental precautions Avoid discharge into drains, water courses or onto the ground. 7. Handling and Storage Precautions for safe handling Avoid contact with eyes or clothing. Not a skin wipe.

5 For use on hard non-porous surfaces only. Do not reuse the empty container. Do not reuse towelette. Provide adequate ventilation. Avoid prolonged exposure. Conditions for safe storage, including any incompatibilities Wear appropriate personal protective equipment. Observe good industrial hygiene practices. When using do not eat or drink. Wash hands before breaks and immediately after handling the product. Do not contaminate water, food or feed by storage or disposal. When not in use keep center cap of lid closed to prevent moisture loss. Store away from incompatible materials (see Section 10 of the SDS). 8. Exposure Controls/Personal Protection Occupational exposure limits No exposure limits noted for ingredient(s). Biological limit values No biological exposure limits noted for the ingredient(s). Exposure guidelines This material does not have established exposure limits. Appropriate engineering controls Ensure adequate ventilation. Individual protection measures, such as personal protective equipment Eye/face protection Wear gear as deemed necessary.

6 Follow label directions. Skin protection Hand protection Wear as deemed necessary, follow label directions. Other Use personal protective equipment as required. Follow label instructions. Respiratory protection Where exposure guideline levels may be exceeded, use an approved NIOSH respirator. Thermal hazards Not available. General hygiene considerations Handle in accordance with good industrial hygiene and SAFETY practice. Wash hands before breaks and immediately after handling the product. When using do not eat or drink. #25619 Page: 3 of 6 Issue date 09-March-2015 9. Physical and Chemical Properties Appearance Liquid saturated on wipe Physical state Solid. Form Pre-moistened towelette. Color White Odor Natural Odor threshold Not available. pH (liquid) Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Pour point Not available. Specific gravity - (liquid) Partition coefficient (n-octanol/water) Not available. Flash point > F (> C) Evaporation rate Not available.

7 Flammability (solid, gas) Not applicable. Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Not available. Not available. Explosive limit - lower (%) Not available. Explosive limit - upper (%) Not available. Vapor pressure Not available. Vapor density Not available. Relative density Not available. Solubility(ies) Not available. Auto-ignition temperature Not available. Decomposition temperature Not available. Viscosity Not available. 10. Stability and Reactivity Reactivity May react with incompatible materials. Possibility of hazardous reactions Hazardous polymerization does not occur. Chemical stability Material is stable under normal conditions. Conditions to avoid Do not mix with other chemicals. Incompatible materials Strong oxidizing agents. Hazardous decomposition products May include and are not limited to: Ammonia.

8 Chloride compounds Nitrogen compounds. Sodium oxides. 11. Toxicological Information Information on likely routes of exposure Ingestion Health injuries are not known or expected under normal use. Inhalation Health injuries are not known or expected under normal use. Skin contact Non-irritating based on test data . Eye contact Mildly irritating to eyes based on test data . Symptoms related to the physical, chemical and toxicological characteristics Exposed individuals may experience eye tearing, redness, and discomfort. Information on toxicological effects Acute toxicity #25619 Page: 4 of 6 Issue date 09-March-2015 Product Species Test Results PDI Sani-Cloth AF3 Germicidal Disposable Wipe Acute Dermal LD50 Rabbit Inhalation LC50 Rat Oral LD50 Rat Components Species Benzyl-C12-18-alkyldimethyl ammonium chlorides (CAS 68391-01-5) Acute Dermal LD50 Rat Inhalation LC50 Not available Oral LD50 Mouse > 5000 mg/kg, Based on OPPTS Test data > mg/l/4h, Based on OPPTS Test data > 5000 mg/kg, Based on OPPTS Test data Test Results 2000 mg/kg 1420 mg/kg 150 mg/kg Rat 240 mg/kg Quaternary ammonium compounds, C12-18-alkyl [(ethylphenyl) methyl] dimethyl, chlorides (CAS 68956-79-6) Acute Dermal LD50 Not available Inhalation LC50 Not available Oral LD50 Rat Skin corrosion/irritation Non-irritating based on test data .

9 250 mg/kg Classified based on OPP/GHS Classification Criteria and Labeling Comparison. Toxicity Category IV according to the OPPTS Acute Skin Irritation Study. Exposure minutes Not available. Erythema value Not available. Oedema value Not available. Serious eye damage/eye irritation Causes irritation. Classified based on OPP/GHS Classification Criteria and Labeling Comparison. Toxicity Category III according to the OPPTS Acute Eye Irritation Study. Corneal opacity value Not available. Iris lesion value Not available. Conjunctival reddening value Not available. Conjunctival oedema value Not available. Recover days Not available. Respiratory or skin sensitization Respiratory sensitization Not available. Skin sensitization Not a skin sensitizer based on test data . Germ cell mutagenicity No data available to indicate product or any components present at greater than are mutagenic or genotoxic. Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.

10 US. OSHA Specifically Regulated Substances (29 CFR ) Not listed. Reproductive toxicity This product is not expected to cause reproductive or developmental effects. Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Not classified. Not classified. Aspiration hazard Not classified. #25619 Page: 5 of 6 Issue date 09-March-2015 Chronic effects Not classified. Further information Not available. 12. Ecological Information Ecotoxicity The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Persistence and degradability No data is available on the degradability of this product. Bioaccumulative potential No data available. Mobility in soil No data available. Mobility in general Not available. Other adverse effects No other adverse environmental effects ( ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.