SAFETY DATA SHEET - Wainbee

1 JUN-AIR SJ-27 FSynthetic lubricating oilTechnical Contact: (800) 248-4684 Medical Emergency: (832) 486-4700 CHEMTREC Emergency: (800) 424-9300(United States Only) SAFETY data SHEETGHS product identifierSynonymsEmergency telephone numberSection 1. Identification:::Supplier's details:CITGO Petroleum Box 4689 Houston, TX 77210 JUN-AIR #:632492435 Section 2. Hazards identificationNot of the substance or mixture:Signal word:No signal statements:No known significant effects or critical statementsPrevention:Not :Not :Store in a dry place and/or in closed container. Store in accordance with all local,regional, national and international :Dispose of contents and container in accordance with all local, regional, national and international label elementsGeneral:Avoid contact with eyes, skin and clothing. May be harmful if swallowed. IF IN EYES:Rinse cautiously with water for several minutes. If swallowed, do not induce handling, always wash hands thoroughly with soap and water.

2 If you feel unwell,seek medical attention and show the label when possible. Keep out of reach of status:While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR ), this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this not otherwise classified:None 3. Composition/information on ingredientsOther means of identification:Synthetic lubricating oilCAS number:Not number/other identifiers:MixtureAny concentration shown as a range is to protect confidentiality or is due to process of issue/Date of revision:9/16 of previous issue:9/16 :31/9 JUN-AIR SJ-27 FSection 3. Composition/information on ingredientsThere are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this exposure limits, if available, are listed in Section out mouth with water.

3 Remove victim to fresh air and keep at rest in a position comfortable for breathing. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms 4. First aid measuresEye contactSkin contactInhalationIngestion::::Protection of first-aiders:No action shall be taken involving any personal risk or without suitable to physician:Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or of necessary first aid measuresSpecific treatments:Treat symptomatically and important symptoms/effects, acuteInhalation:No known significant effects or critical known significant effects or critical hazards.

4 :IngestionSkin contact:No known significant effects or critical known significant effects or critical hazards.:Eye contactOver-exposure signs/symptomsSkin contactIngestionInhalationNo specific specific specific data .:::Eye contact:No specific acute health effectsSee toxicological information (Section 11)Indication of immediate medical attention and special treatment needed, if necessarySection 5. Fire-fighting measuresHazardous thermal decomposition productsSpecific hazards arising from the chemicalDecomposition products may include the following materials:carbon dioxidecarbon monoxideIn a fire or if heated, a pressure increase will occur and the container may an extinguishing agent suitable for the surrounding media::None extinguishing media:Unsuitable extinguishing media:Date of issue/Date of revision:9/16 of previous issue:9/16 :32/9 JUN-AIR SJ-27 FSection 5. Fire-fighting measuresPromptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.

5 No action shall be taken involving any personal risk or without suitable should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure protective equipment for fire-fighters:Special protective actions for fire-fighters:Section 6. Accidental release measuresEnvironmental precautionsPersonal precautions, protective equipment and emergency proceduresStop leak if without risk. Move containers from spill area. Prevent entry into sewers,water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible,absorbent material sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

6 ::No action shall be taken involving any personal risk or without suitable surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).Large spill:Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal spill:Methods and materials for containment and cleaning upFor non-emergency personnelFor emergency responders:If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.

7 See also the information in "For non-emergency personnel".Section 7. Handling and storageAdvice on general occupational hygieneConditions for safe storage,including any incompatibilitiesEating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating,drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

8 ::Protective measuresPut on appropriate personal protective equipment (see Section 8).:Precautions for safe handlingBulk Storage Conditions: Maintain all storage tanks in accordance with applicable regulations. Use necessary controls to monitor tank inventories. Inspect all storage tanks on a periodic basis. Test tanks and associated piping for tightness. Maintain the automatic leak detection devices to assure proper working of issue/Date of revision:9/16 of previous issue:9/16 :33/9 JUN-AIR SJ-27 FNone 8. Exposure controls/personal protectionHand protectionUse a properly fitted, air-purifying or supplied-air respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is glasses equipped with side shields are recommended as minimum protection in industrial settings.

9 If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: Splash goggles. SAFETY eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or inhalation hazards exist, a full-face respirator may be required protectionRespiratory protection:::Body protectionPersonal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.:Environmental exposure controls:Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, vapor controls, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable engineering controls:Good general ventilation should be sufficient to control worker exposure to airborne hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working techniques should be used to remove potentially contaminated contaminated clothing before reusing.

10 Ensure that eyewash stations and SAFETY showers are close to the workstation measures:Control parametersIndividual protection measuresOccupational exposure limitsSkin protectionOther skin protection:Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this 9. Physical and chemical propertiesPhysical stateVapor pressureRelative densityVapor >1 [Air = 1]< kPa (<1 mm Hg) [room temperature]Insoluble in the following materials: cold amberColorEvaporation rate<1 (butyl acetate = 1)Flash pointOpen cup: 250 C (482 F) [Cleveland.]Not available.::::::::::Boiling point:Not and upper explosive (flammable) limits:Not lbs/galGravity, API::18 lbs/galDate of issue/Date of revision:9/16 of previous issue:9/16 :34/9 JUN-AIR SJ-27 FSection 9. Physical and chemical propertiesAuto-ignition temperature390 C (734 F)ViscosityKinematic (40 C (104 F)): cm2/s ( cSt)::Viscosity SUS:95 SUS @100 FSection 10.