SECTION 1 IDENTIFICATION - K-FLEX USA

Flexible PVC Seam & Joint Sealing Tape - K-FLEX USA

©May 2010 K-FLEX USA. K-FLEX® is a registered trademark of K-FLEX USA. KFDS-0183-0114 K-FLEX USA - 100 Nomaco Drive - Youngsville, NC 27596 - toll free 800-765-6475 - fax 800-765-6471 - www.kflexusa.com

  Tape

K-FLEX INSUL-SHEET

DESCRIPTION K-FLEX ® INSUL-SHEET is an NBR/PVC-based closed cell, flexible elastomeric foam insulation. It is environmentally-friendly as it is free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and

  Sheet, Flex, Sunil, K flex insul sheet, K flex, 174 insul sheet

K-FLEX INSUL-TUBE

Made in USA Contains a Protective Antimicrobial Agent DESCRIPTION K-FLEX ® INSUL-TUBE is an NBR/PVC-based closed cell, flexible elastomeric foam insulation. It is environmentally-friendly as it is free of

  Tubes, Insulation, Sunil, Insul tube

Closed Cell Flexible Elastomeric Foam Insulation …

Made in USA Contains a Protective Antimicrobial Agent DESCRIPTION K-FLEX ® INSUL-LOCK DS (DoubleSeal) is an NBR/PVC-based closed cell, flexible elastomeric foam insulation. It is pre-slit with a factor

  Flexible, Foam, Elastomeric, Insulation, Cells, Cell flexible elastomeric foam insulation, Flexible elastomeric foam insulation

Ammonia - K-FLEX USA

ABOUT K-FLEX USA GLOBAL PRESENCE L’ISOLANTE K-FLEX: • 11 production facilities worldwide • Commercial distribution in 43 countries • Headquartered in Italy

  Ammonia, Flex, Ammonia k flex usa, Flex usa

K-FLEX 320/620 ADHESIVE

PHYSICAL PROPERTIES K-FLEX® 320 / 620 CONTACT ADHESIVE Color Amber (320), Black (620) Base Neoprene Solvents Acetone, Toluene, Hexane Viscosity Medium Syrup Weight 6.98 ± 0.2 lbs/gal

  Adhesive

KFDS-0020 K-Flex Clad AL

Made in USA Contains a Protective Antimicrobial Agent DESCRIPTION K-FLEX CLAD® AL is a composite product comprised of a multi-ply laminate jacketing (PVC backing and aluminum foil coated with

INSUL-TUBE WHITE - K-FLEX USA

INSUL-TUBE® WHITE CLOSED CELL FLEXIBLE ELASTOMERIC FOAM INSULATION K-FLEX INSUL-TUBE® WHITE K-FLEX ® INSUL-TUBE WHITE is an NBR/ PVC-based closed cell, flexible elastomeric foam insulation.

  Tubes, White, Sunil, Insul tube, Insul tube white, 174 white

INSUL-TUBE - K-FLEX USA

INSUL-TUBE® Pipe Insulation Flexible Closed Cell Insulation Designed for the HVAC/R Industry DESCRIPTION INSUL-TUBE® pipe Insulation is an envi- ronmentally friendly, CFC-free, flexible

  Flex

Section 1: IDENTIFICATION

Vacuum Gas Oil SAFETY DATA SHEET / MATERIAL SAFETY DATA SHEET Date of Preparation: December 2, 2016 Page 1 of 11 Deerfoot Consulting Inc. Section 1: IDENTIFICATION Product Identifier: Vacuum Gas Oil Other Means of Identification : FCC Feedstock; Light Vacuum Gas Oil; Heavy Vacuum Gas Oil; Raw Vacuum Gas Oil.

  Identification, Section, Section 1

Section 1: IDENTIFICATION - cdn.simplegreen.com

Section 2: HAZARDS IDENTIFICATION . This product is not regulated under the Hazardous Products Regulation (WHMIS 2015). This product has been classified and labelled in accordance with Health Canada as disinfectant drugs under the . Food and Drugs Act . and . Regulations. A safety data

  Identification, Section, Section 1

SECTION 1: IDENTIFICATION - Leica Biosystems

Page: 1 of 10 SECTION 1: IDENTIFICATION Product identifier used on the label CV MOUNT Product number 14046430011 Recommended use of the chemical and restrictions on use Recommended use For use when mounting coverglass on top of a prepared specimen. Restrictions on use All other uses.

  Identification, Section, Section 1

SECTION 1: IDENTIFICATION - CDMS Home

For substances listed in section 3 that are not listed here, there are no established exposure limits from the manufacturer, supplier, importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), or OSHA (PEL).

  Identification, Section, Cdms, Section 1

Section 1: Identification - planborganics.com

Safety Data Sheet Section 11: Toxicological Information Primary Routes of Exposure: Inha lation, skin contact, and eye contact Symptoms of Exposure: May act …

  Identification, Section, Section 1

SECTION 1 - IDENTIFICATION - documents.trex.com

section 8 – exposure controls / personal protection : VENTILATION: Provide local exhaust ventilation and general room ventilation to maintain exposure concentrations of thermal decomposition products below the respective OSHA PEL’s.

  Identification, Section, Section 1

SECTION 1: Identification - Duro-Last

SECTION 5: Fire Fighting Measures The product is a solid article that will burn if exposed to an ignition source of sufficient heat and intensity, or open flame, such as a welder’s torch.

  Identification, Section, Section 1

Section 1. Identification - eatoncompressor.com

1-Propene, 2-methyl-, homopolymer ≥1 - ≤3 9003-27-4 Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are

  Identification, Section, Section 1

Section 1: IDENTIFICATION - Plains Midstream Canada

Condensate - COED to Enbridge SAFETY DATA SHEET Date of Preparation: April 11, 2016 Page 2 of 16 Deerfoot Consulting Inc. Precautionary Statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.

  Identification, Section, Section 1

Section 1: IDENTIFICATION - Plains Midstream Canada

Steelman NGL SAFETY DATA SHEET Date of Preparation: April 11, 2016 Deerfoot Consulting Inc. Page 2 of 12 Response: If exposed or concerned: Get medical advice/attention. Get medical advice/attention if …

  Identification, Section, Section 1