Example: stock market

September 2016 CEC Title 20 Regulation - Lutron Electronics

CEC Title 20 RegulationApplication Note #601 Revision ISeptember 20161 Customer Assistance is the CEC Title 20 Regulation ?The California Energy Commission (CEC) established new energy efficiency requirements with the 2015 Appliance Efficiency regulations (California Code of regulations , Title 20) for regulated products sold in the state of California. Regulated products manufactured on or after July 1, 2016 must comply with the requirements in the CEC Title 20 Regulation and be certified through the CEC Title 20 Regulation includes new requirements for fluorescent dimming ballasts. The new metric, Weighted Ballast Luminous Efficiency (weighted BLE) , is a weighted efficiency value based on measurements made at both maximum output and dimmed levels. Additionally, the CEC has set a maximum standby power limitation for fluorescent dimming ballasts. The scope of the CEC Title 20 Regulation is limited to fluorescent dimming ballasts which control 4 ft T5 or 4 ft T8 linear lamps.

3 Customer Assistance — 1.844.LUTRON1 Application Note #601 CEC Title 20 Compliant Model Numbers The EC5NS, EHD, and H3 fluorescent dimming ballast models in Table 2 comply with the requirements of the CEC

Tags:

  2016, Title, Regulations, Electronic, Lutron electronics, Lutron, September, September 2016 cec title 20 regulation

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of September 2016 CEC Title 20 Regulation - Lutron Electronics

1 CEC Title 20 RegulationApplication Note #601 Revision ISeptember 20161 Customer Assistance is the CEC Title 20 Regulation ?The California Energy Commission (CEC) established new energy efficiency requirements with the 2015 Appliance Efficiency regulations (California Code of regulations , Title 20) for regulated products sold in the state of California. Regulated products manufactured on or after July 1, 2016 must comply with the requirements in the CEC Title 20 Regulation and be certified through the CEC Title 20 Regulation includes new requirements for fluorescent dimming ballasts. The new metric, Weighted Ballast Luminous Efficiency (weighted BLE) , is a weighted efficiency value based on measurements made at both maximum output and dimmed levels. Additionally, the CEC has set a maximum standby power limitation for fluorescent dimming ballasts. The scope of the CEC Title 20 Regulation is limited to fluorescent dimming ballasts which control 4 ft T5 or 4 ft T8 linear lamps.

2 Fluorescent dimming ballasts that control other lamp types are exempt from this this Affects Lutron Ballasts:As a result of this new Regulation , select models of Lutron fluorescent dimming ballasts will no longer be offered for sale or use in the state of California. The rest of this document is dedicated to explaining this in more detail. Visit for future updates to this Note #601 Note: Model number list is subject to 1: Affected model numbersAffected Model NumbersThe T5 and T8 Lutron fluorescent dimming ballast model numbers shown in Table 1 manufactured on or after July 1, 2016 will be unavailable for sale or use in the state of California. Also, custom ballast factor will no longer be offered in California for these and T8 Lutron fluorescent dimming ballast models manufactured prior to July 1, 2016 are exempt from the new energy efficiency requirements mandated by the CEC Title 20 Regulation . Lutron is maintaining a LIMITED stock of these models that are available for sale or use in California on a first come, first served basis.

3 Any existing stock of Lutron fluorescent dimming ballasts models shown in Table 1 manufactured before July 1, 2016 currently in your inventory can still be sold or used in the state of California (customer is responsible for checking the manufacturing date code on the product label). Date code is in the format NumbersBallastLutronLutron Buy American Act (BAA)GraingerEC5EC5T528 JUNV1 UEC5T528 JUNV1-EC5T528 JUNV2 UEC5T528 JUNV2-EC5T554 JUNV1 UEC5T554 JUNV1-EC5T554 JUNV2 UEC5T554 JUNV2-EC5T832 JUNV1 UEC5T832 JUNV1-EC5T832 JUNV2 UEC5T832 JUNV2-EC5T8 RWJUNV1 UEC5T8 RWJUNV1-EC5T8 RWJUNV2 UEC5T8 RWJUNV2-EC5T8 RWGUNV3 LUEC5T8 RWGUNV3-EC5T832 GUNV2--EC5T832 GUNV2 LUEC5T832 GUNV2L-EC5T832 GUNV3 LUEC5T832 GUNV3L-EC5T832 GUNV317 LUEC5T832 GUNV317L-EHDEHDT832GU310 UEHDT832GU31018C853 EHDT832GU317 UEHDT832GU31718C854H3DH3DT832GU110UH3DT8 32GU1105 NUJ0H3DT832GU117UH3DT832GU117-H3DT832GU2 10UH3DT832GU2105 NUJ1H3DT832GU217UH3DT832GU217-H3DT832GU3 10UH3DT832GU3104 LFW3H3DT832GU317UH3DT832GU3174 LFX33 Customer Assistance Note #601 CEC Title 20 Compliant Model NumbersThe EC5NS, EHD, and H3 fluorescent dimming ballast models in Table 2 comply with the requirements of the CEC Title 20 Regulation and have been certified through the CEC.

4 These models will continue to be available for sale in the state of California. Table 2: Certified EC5NS, EHD, and H3 fluorescent dimming ballastsTable 4: Certified H3D fluorescent dimming ballastsModel NumbersBallastLutronLutron Buy American Act (BAA)GraingerEC5 NSEC5 NST528CU110R--EC5 NST528CU210R--EC5 NST554CU110R--EC5 NST554CU210R--EC5 NST832CU1C85R--EC5 NST832CU2C85R--EHDEHDT525MU1 RWUEHDT525MU1RW-EHDT525MU2 RWUEHDT525MU2RW-EHDT528MU110 UEHDT528MU11018C863 EHDT528MU210 UEHDT528MU21018C864 EHDT549MU1 RWUEHDT549MU1RW-EHDT549MU2 RWUEHDT549MU2RW-EHDT554MU110 UEHDT554MU11018C859 EHDT554MU210 UEHDT554MU21018C860 EHDT828MU1 RWUEHDT828MU1RW-EHDT828MU2 RWUEHDT828MU2RW-EHDT832MU110 UEHDT832MU11018C849 EHDT832MU117 UEHDT832MU11718C851 EHDT832MU210 UEHDT832MU21018C850 EHDT832MU217 UEHDT832MU21718C852H3H3T832GU310--H3T832 GU317--H3T832GU3C85--LutronLutron Buy American Act (BAA)GraingerH3DT528CU110UH3DT528CU1104 LFW4H3DT528CU210UH3DT528CU2104 LFW5H3DT554CU110UH3DT554CU1106 ZER6H3DT554CU210UH3DT554CU2106 ZER7H3DT832CU110UH3DT832CU1104 LFW1H3DT832CU117UH3DT832CU1174 LFX1H3DT832CU210UH3DT832CU2104 LFW2H3DT832CU217UH3DT832CU2174 LFX2 Table 3: H3D ballast date codesDate Code (DD-MM-YYYY)CEC Title 20 Regulation StatusBefore 01-07- 2016 (July 1, 2016 )Exempt - can sell or use in to 16-09- 2016 (July 1, 2016 to Sept.)

5 16, 2016 )May be compliant - can sell or use in California if green dot is present on right side of ballast label. If no green dot, contact Lutron Customer Assistance at 16-09- 2016 (Sept. 16, 2016 ) Compliant - can sell or use in H3D fluorescent dimming ballast models in Table 4 are compliant with the CEC Title 20 Regulation if they meet the requirements in Table Note #601 Table 5: Alternative Lutron fluorescent dimming ballast recommendations* For fixtures using reduced wattage lamps, replace with T8 32 W lamps.** Alternative ballast uses 3-wire control. For applications with digital control, use with a C5-BMF-2A. For applications with 3-wire control, the C5-BMF-2A is not Will ChangeEC5EC5T528 JUNV1-EC5 NST528CU110 Rno sensor inputsEC5T528 JUNV2-EC5 NST528CU210 Rno sensor inputsEC5T554 JUNV1-EC5 NST554CU110 Rno sensor inputsEC5T554 JUNV2-EC5 NST554CU210 Rno sensor inputsEC5T832 JUNV1-EC5 NST832CU1C85 Rno sensor inputsEC5T832 JUNV2-EC5 NST832CU2C85 Rno sensor inputsEC5T8 RWJUNV1 *-EC5 NST832CU1C85 Rno sensor inputsEC5T8 RWJUNV2 *-EC5 NST832CU2C85 Rno sensor inputsEC5T832 GUNV2-EC5 NST832CU2C85 Rcase size, no sensor inputsEC5T832 GUNV2L-EC5 NST832CU2C85 Rcase size, not pre-wired, no sensor inputsEC5T8 RWGUNV3L*-EC5 NST832CU1C85R with EC5 NST832CU2C85 Rcase size, number of devices in fixture, not pre-wired, additional address required if connecting on an EcoSystem link, no sensor inputs-H3T832GU3C85low end light level, not pre-wired, no sensor inputs, 3-wire control only**EC5T832 GUNV3L-EC5 NST832CU1C85R with EC5 NST832CU2C85 Rcase size, number of devices in fixture, not pre-wired.

6 Additional address required if connecting on an EcoSystem link, no sensor inputs-H3T832GU3C85low end light level, not pre-wired, no sensor inputs, 3-wire control only**EC5T832 GUNV317L-H3T832GU317low end light level, not pre-wired, no sensor inputs, 3-wire control only**EHDEHDT832GU31018C853H3T832GU310 with C5-BMF-2 Anumber of devices in fixtureEHDT832MU110 with EHDT832MU210case size, number of devices in fixture, additional address required if connecting on an EcoSystem linkEHDT832GU31718C854H3T832GU317 with C5-BMF-2 Anumber of devices in fixtureEHDT832MU117 with EHDT832MU217case size, number of devices in fixture, additional address required if connecting on an EcoSystem linkH3DH3DT832GU1105 NUJ0H3DT832CU110case sizeH3DT832GU117-H3DT832CU117case sizeH3DT832GU2105 NUJ1H3DT832CU210case sizeH3DT832GU217-H3DT832CU217case sizeH3DT832GU3104 LFW3H3T832GU310 with C5-BMF-2A number of devices in fixtureH3DT832GU3174 LFX3H3T832GU317 with C5-BMF-2A number of devices in fixtureIf the ballast application does not require low-voltage sensors or controls attached to the EC5 ballasts, then use the alternative EC5NS or H3 models shown above.

7 If the ballast application requires low-voltage sensors or controls attached to the ballast, a C5-BMF-2A will need to be used with the alternative ballast identified above. Confirm the additional device will fit in the fixture. See the wiring diagrams and dimensions shown on the next two Model NumbersA list of alternative Lutron fluorescent dimming ballasts for models listed in Table 1 is shown in Table Assistance Note #601 Existing Sensor WiringAlternative Sensor WiringDaylight Sensor22 AWG ( mm2) solid onlyNEUDHSHLINE+20 VCommonIROccDaylightClass 2 (22 AWG Solid)Class 2 BusE1E2To EcoSystem BusE1E2 CLASS2 DIGITALCLASS 222 AWG+20 VCommonIROccDaylightDaylight SensorC5-BMF-2A TerminalsTo EcoSystem BusE1E2 CLASS2 DIGITALCLASS 222 AWG+20 VCommonIROccDaylightC5-BMF-2A TerminalsOccupancy SensorTo EcoSystem BusE1E2 CLASS2 DIGITALCLASS 222 AWG+20 VCommonIROccDaylightC5-BMF-2A TerminalsIR ReceiverTo EcoSystem Bus22 AWG ( mm2) solid onlyOccupancy SensorNEUDHSHLINE+20 VCommonIROccDaylightClass 2 (22 AWG Solid)Class 2 BusE1E2To EcoSystem Bus22 AWG ( mm2) solid onlyIR ReceiverNEUDHSHLINE+20 VCommonIROccDaylightClass 2 (22 AWG Solid)

8 Class 2 BusE1E2To EcoSystem BusWiring DiagramsHotNeutralSwitched HotNeutralDimmed HotE1E2 CLASS2 DIGITALCLASS 222 AWG+20 VCommonIROccDaylightE1E2 NEUHOTDHC lass 2 BusLINEEcoSystem C5-BMF-2 AHi-lume 3D BallastMains VoltageReplacing Ballast with an Alternative Ballast and C5-BMF-2 AEcoSystem Note #601A = in (25 mm)B = in (30 mm)C = in (236 mm)D = in (226 mm) mounting centersABCDA = in (457 mm)B = in (449 mm) mounting centersC = in (25 mm)D = in (30 mm)A = in (241 mm)B = in (226 mm) mounting centersC = in (180 mm)D = in (25 mm)E = in (60 mm)BACDED imensionsC5-BMF-2AC / J CaseG CaseLutron Electronics Co., Suter RoadCoopersburg, PA 18036-1299 048601 Rev. I 09/ 2016 Application Note #6017 Lutron Contact NumbersLutron, EcoSystem, and Hi-lume are trademarks of Lutron Electronics Co., Inc. registered in the and other countries. WORLD HEADQUARTERSUSAL utron Electronics Co., Suter RoadCoopersburg, PA 18036-1299 TEL: + : & South America Customer AssistanceUSA, Canada, ( )Mexico:+ America:+ HEADQUARTERSU nited KingdomLutron EA Sovereign CloseLondon, E1W 3JF United KingdomTEL: +44.

9 (0) : +44.(0) (UK): Support: HEADQUARTERSS ingaporeLutron GL Havelock Road#07-04 King s CentreSingapore 169662 TEL: + : + Support: Technical HotlinesNorthern China: China: Kong: : : + : : : Countries: + Notes Warranty replacements of T5 or T8 linear fluorescent dimming ballasts are not regulated under the CEC Title 20 Regulation . If a job meets the criteria for a warranty replacement ( ) and a warranty declaration form is signed, a replacement ballast will be sent free of charge. Please contact Lutron Customer Assistance at Affected EC5, H3D, and EHD ballasts are NOT being discontinued. They are still available for sale to customers outside the state of California.


Related search queries