Example: confidence
Series 218 - CTS Corp
Soldering Maximum reflow temperature, 250°C for 30 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Shock Per MIL-STD-202G, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Vibration
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Slide Potentiometer - CTS
www.ctscorp.comCommercial Linear Motion Carbon Composition Slide Potentiometer • 11/4" (31.7mm) travel • 1/4 watt power rating • Choice of resistance tapers • Economical • Wide resistance range • Choice of mounting styles
Model CB3 & CB3LV - CTS
www.ctscorp.comDocument No. 008-0256-0 Page 1- 3 Rev. G www.ctscorp.com Model CB3 & CB3LV HCMOS/TTL Clock Oscillator FEATURES • Standard 7.0mm x 5.0mm 4-Pad Surface Mount Package • HCMOS/TTL Compatible Output • Fundamental and 3rd Overtone Crystal Designs • Frequency Range 1 – 200 MHz
Series 450 - CTS Corp
www.ctscorp.comB SPST Rotary 050 C Rotary D DPST Rotary 027 E SPDT Rotary 028 F SPST Push -ll FR K SPST Push- 040 H SPDT Push-Push 041 J FRSPST Rotary -GC Series Terminal Style Mounting Style “A” Shaft Length ”L” Shaft Trim Resistance Code Resistance Tolerance Taper Switch Option A/R Lug Options Metal Shaft.625”(15.9mm) 24 .750”(19.1mm)
Piezoelectric Polycrystalline (PZT) Components and Wafers
www.ctscorp.comMachining operations can be optimized to obtain a variety of surface finishes. Surface finishes as low as 250 Å Ra are achievable. More than 15 sputtering systems worldwide. Typical thin film electrode materials include sputtered Ni, NiCr, Ti, Sn, Au, Cr and film thickness varies from 1,000 Å to 12,500 Å. Typical thick
74x Series - CTS Corp
www.ctscorp.comOptional tolerance at ±1% is available for all 741 - 745 package codes, 4-digit resistor codes; except 745X101 and 745X102 [±5% and ±1% only]. Consult factory for availability with 740X043 package code. Not all performance combinations and resistor values may be available. Resistor Value * Termination 10k ohm Matte Sn Finish
219 Series 2021-3-12 - CTS Corp
www.ctscorp.com0.6mm/.024” actuator travel Optional top tape seal for board spray washing Description Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact type design allows to be used at small size application. Optional top tape sealed structure is optimized for board
Related documents
1111C Series - Stanley Electronic Components
www.stanley-components.comOperating Temperature. Lead–free soldering compatible. RoHS compliant. Green: 558nm(BG),567nm(PG) Yellow Green: 572nm(PY) Yellow: 590nm(AY) Orange: 606nm(AA) Red ... When the second reflow soldering process is performed, intervals between the first . and second reflow should be short as possible (while allowing some time for the ...
Standard Thick Film Chip Resistors - Vishay Intertechnology
www.vishay.comTemperature coefficient ± 200 ppm/K; ± 100 ppm/K ... soldering using wave, reflow or vapor phase as shown in IEC 61760-1 (1). The encapsulation is resistant to all ... (Pb)-free and lead-containing soldering processes. Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. The ...
Zener Diodes - Vishay Intertechnology
www.vishay.com• Wave and reflow solderable • AEC-Q101 qualified available • Base P/N-M3 - halogen-free, RoHS-compliant, and ... SOLDERING CONDITIONS SMA (DO-214AC) 73 mg UL 94 V-0 MSL level 1 (according J-STD-020) ... Junction temperature Tj 150 °C Storage temperature range Tstg-65 to +150 °C Forward voltage (max.)
IPC/JEDEC J-STD-020C Moisture/Reflow Sensitivity ...
ferroxcube.home.plduring reflow soldering to boards that have been profiled for larger packages. Therefore, technical and/or business issues normally require thin, small volume SMD packages (reference Table 4-1, 4-2) to be ... Components intended for use in a ‘‘lead-free’’ assembly process shall be evaluated using the ‘‘lead free’’ peak ...