Single-Ended Conductive Polymer Aluminum Solid ...

1 Single-Ended Conductive Polymer Aluminum Solid Electrolytic capacitors A750 Series, 105 C. Overview Applications KEMET's A750 Series of Single-Ended Conductive Polymer Typical applications include mobile phone chargers, Aluminum Solid Electrolytic capacitors offer longer life and computer motherboards, servers and adapters (laptop greater stability across a wide range of temperatures. The power supplies). A750 Series highly Conductive Solid Polymer electrolyte eliminates the risk of explosion from drying out and due to its low ESR properties is able to withstand higher ripple currents during normal operation. The A750 Series are ideally suited for industrial and commercial applications.

2 Benefits Through-hole form factor Low impedance High ripple current 105 C/2,000 hours RoHS compliant Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System A 750 EK 567 M 0E AA E020. Capacitor Capacitance Rated Voltage Series Size Code Tolerance Packaging ESR. Class Code (pF) (VDC). A = Aluminum Single-Ended See Dimension First two digits M = 20% = 0E See Ordering Last 3 digits Conductive Table represent 4 = 0G Options Table represent Polymer Solid significant = 0J significant Capacitor figures for 10 = 1A figures for ESR. 105 C capacitance 16 = 1C values.(m ). 2,000 Hour values. Last 25 = 1E. digit specifies the number of zeros to be added.

3 One world. One KEMET. KEMET Electronics Corporation Box 5928 Greenville, SC29606 864-963-6300 A4067_A750 12/13/2016 1. Single-Ended Conductive Polymer Aluminum Solid Electrolytic capacitors A750 Series, 105 C. Ordering Options Table Lead Length Lead and Diameter Packaging Type Lead Type (mm) Packaging Code Standard Bulk Packaging Options Long Lead 5 18 Bulk (bag) 15 Minimum AA. (Loose Standard Leads). 5 18 Bulk (bag) Cut Leads 5(1) BA. 5 18 Bulk (bag) Formed Leads 5(1) CA. Standard Auto-Insertion Packaging Options 5 Ammo Tape and Box Formed to mm H0 = 16 FA. 5 8 Ammo Tape and Box Formed to 5 mm H0 = 16 DA. H = 6 8 Ammo Tape and Box Straight (for 8 x 12 H = EA. 20 ). 10 13 Ammo Tape and Box Straight H = EA.

4 Contact KEMET for other Lead and Packaging options (1). Contact KEMET for custom Lead Length and options 3 to 10 mm Long Lead (Loose Standard Leads). Diameter d 5 8 10 13 18. F d F 2 5 5 H 15 15 15 15 15 15. H 4. Minimum Minimum Cut Lead Diameter d 5 8 10 13 18. F d F 2 5 5 H According to customer requirement 3 10 mm H Formed Lead d Diameter 5 8 10 13 18. F d F 5 5 5 5 5 5. H According to customer requirement 3 10 mm H Maximum KEMET Electronics Corporation Box 5928 Greenville, SC29606 864-963-6300 A4067_A750 12/13/2016 2. Single-Ended Conductive Polymer Aluminum Solid Electrolytic capacitors A750 Series, 105 C. Dimensions Millimeters d P. L D. 15 4. Minimum Minimum D L d P. Size Code Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance BG 5 7 BM 5 9 EK 8 KK 8 8 KS 8 12 MS 10 12 Performance Characteristics Item Performance Characteristics Capacitance Range 47 1,500 F.

5 Rated Voltage 25 VDC. Operating Temperature 55 C to +105 C. Capacitance Tolerance 20% at 120 Hz/20 C. Life Test 2,000 hours (see conditions in Test Method & Performance). I CV or 280 A, whichever is greater Leakage Current C = Rated capacitance ( F), V = Rated voltage (VDC), Voltage applied for 2 minutes at 20 C. Dissipation Factor (tan ). Rated Voltage (V) 25. tan (Maximum) at 120 Hz/20 C KEMET Electronics Corporation Box 5928 Greenville, SC29606 864-963-6300 A4067_A750 12/13/2016 3. Single-Ended Conductive Polymer Aluminum Solid Electrolytic capacitors A750 Series, 105 C. Impedance Z Characteristics at 100 kHz Z ( 25 C)/Z (20 C) Z ( 55 C)/Z (20 C) Compensation Factor of Ripple Current (RC) vs.

6 Frequency Frequency 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient Test Method & Performance Conditions Load Life Test Shelf Life Test Temperature 105 C 105 C. Test Duration 2,000 hours 96 hours Ripple Current No ripple current applied No ripple current applied The sum of DC voltage and the peak AC voltage Voltage No voltage applied must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is restored to 20 C. Capacitance Change Within 20% of the initial value Dissipation Factor Does not exceed 150% of the specified value ESR Does not exceed 150% of the specified value Leakage Current Does not exceed specified value The following specifications will be satisfied when the capacitor is restored to 20 C.

7 Damp Heat after application of rated voltage for 1,000 hours at 60 C, 90%~95% RH. Capacitance Change Within 20% of the initial value Dissipation Factor Does not exceed 150% of the specified value ESR Does not exceed 150% of the specified value Leakage Current Does not exceed specified value The following specifications will be satisfied when the capacitor is subjected to 1,000. Surge Voltage cycles each consisting of charge with the surge voltages specified at 105 C for 30. (Rated Voltage x (V)) seconds through a protective resistor (Rc = 1 k ) and discharge for 5 minutes 30. seconds. Capacitance Change Within 20% of the initial value Dissipation Factor Does not exceed 150% of the specified value ESR Does not exceed 150% of the specified value Leakage Current Does not exceed specified value KEMET Electronics Corporation Box 5928 Greenville, SC29606 864-963-6300 A4067_A750 12/13/2016 4.

8 Single-Ended Conductive Polymer Aluminum Solid Electrolytic capacitors A750 Series, 105 C. Shelf Life and Re-Ageing KEMET's Conductive Polymer Aluminum Solid electrolytic capacitors should not be stored in high temperatures or where there is a high level of humidity. The suitable storage condition for KEMET's Conductive Polymer Aluminum Solid electrolytic capacitors is +5 to +35 C and less than 75% in relative humidity. KEMET's Conductive Polymer Aluminum Solid electrolytic capacitors should not be stored in damp conditions such as water, saltwater spray or oil spray. KEMET's Conductive Polymer Aluminum Solid electrolytic capacitors should not be stored in an environment full of hazardous gas (hydrogen sulphide, sulphurous acid gas, nitrous acid, chlorine gas, ammonium, etc.)

9 KEMET's Conductive Polymer Aluminum Solid electrolytic capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation. The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. If a capacitor is stored for a long period of time, the leakage current must be verified. If the leakage current is superior to the value listed in this catalog, the capacitors must be reformed. Re-age (Reforming) Procedure Apply the rated DC voltage to the capacitor at 105 C for a period of 120 minutes through a 1 k series resistor. Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production.

10 In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than of lead in any homogeneous material. KEMET will closely follow any changes in legislation worldwide and makes any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of Lead in electrode coatings.