SL1 LED - hubbellcdn

1 SL1 LEDSite Lightformsrevision 3/30/21 2021 KIM LIGHTING 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 TEL: 626/968-5666 FAX: 626/968-5716 Approvals:SpecificationsDate:Page: 1 of 4 Type:Job: catalog number:SL1 / / /Fixture Electrical Module Finish Options See page 28"(203 mm)8E"(225 mm)3B"(79 mm)42"*(1067 mm)4K"(114 mm) sl1 led Maximum weight: 37 lbBASE PLANSL1*36" OVERALL HEIGHT AVAILABLE - CONTACT KIM REPRESENTATIVE 8"(203 mm)8K" BOLT CIRCLE DIA.(216 mm)9D"(245 mm)37K"LIGHTCENTERHEIGHT(953 mm)See page 3 Head: One-piece cast, low-copper (< Cu) aluminum, 3/16" wall thickness with external reveal unifying head and shaft.

2 Attachment to shaft is by four bolts concealed within the : One-piece extruded aluminum with internal tracks for attaching head and : One-piece cast, low-copper (< Cu) aluminum secured to shaft by four concealed stainless steel : Clear flat 1/8" thick tempered glass retained by two stainless steel brackets, and four stainless steel, hex socket cap screws, fully Optical System: A total of 27 mid power LED emitters configured in a rectangular array comprised together as a module. Two (2) modules for 18 version and four (4) modules for 36 version. Available in 580nm Amber, 3000K, 4200K and 5100K color Driver: Universal voltage from 120 to 277V with a 10% tolerance.

3 -40 F starting temperature. All drivers are Underwriters Laboratories Bolts: Four 3/8" x 10" + 2" zinc plated L-hooks complete with leveling nuts, washers, couplings, rigid pressed board template and black stainless steel : Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat. Listed to: UL 1598 Standard for Luminaires - UL 8750 Standard for Safety for Light Emitting Diode (LED) Equipment for use in Lighting Products and CSA # Luminaires. RoHS compliant. Meets Buy American provisions within : For full warranty see : Fixtures must be grounded in accordance with national, state and/or local electrical codes.

4 Failure to do so may result in serious personal LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT LEDSite Lightformsrevision 3/30/21 2021 KIM LIGHTING 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 TEL: 626/968-5666 FAX: 626/968-5716 Fixture Cat. No. SL1 Site LightformsPage: 2 of 4 Type:Job:Standard FeaturesFinishTGIC powder coat paintElectrical Module LED = Light Emitting DiodeCat. Nos. for LED Electrical Modules available:UVxLVoltage: UV Universal Voltage shall range from 120V-277V Source: 18L = 18 version 36L = 36 versionxKColor Temperature: 2K = 580nm - Amber 3K = 3000K 4K = 4000K 5K = 5000K2 Custom colors subject to additional charges, minimum quantities and extended lead has a 0-10V dimming interface with a dimming range of 10-100%.

5 Is compatible with most control systems. Note: Not compatible with current sourcing dimmers. Controls compatible via Gray and Purple dimming Dimming InterfaceFixtureHousing30 mA MaxGray Dimming Lead (-)Standard InputBlack (+)White (-)Green (GND)Purple Dimming Lead (+)Cat. No.:Color:Cat. No.:Color: BLSB lack Gloss Smooth LGTL ight Grey Matte Textured B LTBlack Matte Textured PSSP latinum Silver Gloss Smooth DBSDark Bronze Gloss Smooth VGTV erde Green Matte Textured DBTDark Bronze Matte Textured WHSW hite Gloss Smooth GTTG raphic Matte Textured WHTW hite Matte Textured LGSL ight Grey Gloss Smooth CC 2 Custom ColorSL1 LEDSite Lightformsrevision 3/30/21 2021 KIM LIGHTING 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 TEL: 626/968-5666 FAX: 626/968-5716 Page: 3 of 4 Type:Job:Optional FeaturesBattery Back-upCat.

6 No. EM No OptionInternal battery pack provides 90 minutes of supplemental light at 25% of initial lamp back-upOptional Duplex ReceptacleCat. No. DR DR-GFI No OptionMounted 18" from bottom of shaft with a gasketed While-In-Use cover with locking tab. Painted to match bollard. DR weather proof duplex receptacle rated 20A, weather proof duplex receptacle with ground fault circuit interrupter rated 20A, 125V. SL1 LEDSite Lightformsrevision 3/30/21 2021 KIM LIGHTING 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 TEL: 626/968-5666 FAX: 626/968-5716 Page: 4 of 4 Type:Job:Lumen Data Absolute Lumens for 450mA Temperature18 VERSION36 Rating for 450mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare Temperature18 VERSION36 VERSION3000KB1 U0 G1B2 U0 G14000KB1 U0 G1B2 U0 G15000KB1 U0 G1B2 U0 G1 Electrical Drive Current450mA18 Version36 VersionVolts - ACAmps - ACSystem WattsVolts - ACAmps - ACSystem performance and lumen output continues to improve at a rapid pace.

7 Log onto to download the most current photometric files from Kim Lighting s IES File Library. For custom optics and color temperature configurations, contact factory.