Solid Tantalum Chip Capacitors TANTAMOUNT™, Hi …

1 Sprague Revision: 16-Jul-20191 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Tantalum Chip Capacitors TANTAMOUNT ,Hi-Rel COTS, Ultra-Low ESR, Conformal Coated CaseFEATURES High reliability; Weibull failure rate grading available Surge current testing per MIL-PRF-55365 options available Ultra-low ESR Tin / lead (SnPb) termination available Mounting: surface mount Material categorization: for definitions of compliance please see *This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for detailsPERFORMANCE Temperature: -55 C to +125 C (above 85 C, voltage derating is required)Capacitance Range: 10 F to 2200 FCapacitance Tolerance: 10 %, 20 % standardVoltage Rating: 4 VDC to 75 VDCM oisture Sensitivity Level 2aNotes(1)Available on select ratings.

2 See Standard Ratings table We reserve the right to supply higher voltage ratings and tighter capacitance tolerance Capacitors in the same case size. Low ESR Solid Tantalum chip Capacitors allow delta ESR of times the datasheet limits after mountingAvailableAvailableORDERING INFORMATIONT97R227K020 ESATYPECASECODECAPACITANCECAPACITANCETOL ERANCEDC VOLTAGE RATING AT +85 CTERMINATION / PACKAGING(available options areseries dependent)RELIABILITYLEVELSURGECURRENTSe eRatingsandCaseCodetableThis is expressed inpF. The first twodigits are thesignificant third is thenumber of zerosto = 10 %M = 20 %This is expressed involts. To complete thethree-digit block,zeros precede thevoltage rating. A decimal point isindicated by an R (6R3 = V).E = Sn / Pb solder / 7" (178 mm) reelL = Sn / Pb solder / 7" (178 mm), 1/2 reelC = 100 % tin / 7" (178 mm), reelH = 100 % tin / 7" (178 mm), 1/2 reelA = %WeibullB = %Weibull (1)S = 40 hburn-inZ = non-establishedreliabilityA = 10 cyclesat +25 CB = 10 cyclesat -55 C / +85 CS = 3 cyclesat 25 Sprague Revision: 16-Jul-20192 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT The anode termination (D less B) will be a minimum of " [ mm]DIMENSIONS in inches [millimeters]CASE CODEL (MAX.)WHABD (REF.)J (MAX.) [ ] [ ] [ max.] [ ] [ ] [ ] [ ] [ ] [ ] [ max.] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] + / - [ + / - ] [ ] [ ] [ ] [ ] [ ] [ ] + / - [ + / - ] [ ] [ ] [ ] [ ] [ ] [ ] + / - [ + / - ] [ ] [ ] [ ] [ ] [ ] RATINGS AND CASE CODES F4 V10 V16 V20 V25 V35 V40 V50 V63 V75 V10DR15E / RRR / F22 RFZ / H33FH / Z47RH / Z / N68RF100FF / HH150F220 ERM330 VEFH / F470 VEEHH680 EERH1000E / RRF1500RF2200 RJHBADLT antalum wirenib identifiesanode (+) Sprague Revision: 16-Jul-20193 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

4 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCL AT +25 C ( A)MAX. DF AT +25 C 120 Hz(%)MAX. ESRAT +25 C 100 kHz (m )MAX. RIPPLE 100 kHzIRMS (A)AVAILABLERELIABILITY LEVELS4 VDC AT +85 C; VDC AT +125 C470VT97V477(1)004(2)(4)(5) , B, S, Z680ET97E687(1)004(2)(4)(5) , B, S, Z1000ET97E108(1)004(2)(4)(5) , B, S, Z1000RT97R108(1)004(2)(4)(5) , B, S, Z1500RT97R158(1)004(2)(4)(5) , B, S, Z2200RT97R228(1)004(2)(4)(5) , B, S, VDC AT +85 C; 4 VDC AT +125 C330VT97V337(1)6R3(2)(4)(5) , B, S, Z470ET97E477(1)6R3(2)(4)(5) , B, S, Z680ET97E687(1)6R3(2)(4)(5) , B, S, Z1000RT97R108(1)6R3(2)(4)(5) , B, S, Z1500FT97F158(1)6R3(2)(4)(5) , B, S, Z10 VDC AT +85 C; 7 VDC AT +125 C330ET97E337(1)010(2)(4)(5) , B, S, Z470ET97E477(1)010(2)(4)(5) , B, S, Z680RT97R687(1)010(2)(6)(5) , Z1000FT97F108(1)010(2)(3)(5) , S, Z16 VDC AT +85 C; 10 VDC AT +125 C220ET97E227(1)016(2)(4)(5) , B, S, Z330FT97F337(1)016(2)(4)(5) , B, S, Z470HT97H477(1)016(2)(4)(5) , B, S, Z680HT97H687(1)016(2)(4)(5) , B, S, Z20 VDC AT +85 C.

5 13 VDC AT +125 C220RT97R227(1)020(2)(4)(5) , B, S, Z330FT97F337(1)020(2)(6)(5) , Z330HT97H337(1)020(2)(4)(5) , B, S, Z470HT97H477(1)020(2)(3)(5) , S, Z25 VDC AT +85 C; 17 VDC AT +125 C68RT97R686(1)025(2)(4)(5) , B, S, Z100FT97F107(1)025(2)(4)(5) , B, S, Z150FT97F157(1)025(2)(4)(5) , B, S, Z220MT97M227(1)025(2)(3)(5) , S, Z35 VDC AT +85 C; 23 VDC AT +125 C47RT97R476(1)035(2)(4)(5) , B, S, Z68FT97F686(1)035(2)(3)(5) , S, Z100FT97F107M035(2)(3)(5) , S, Z100HT97H107(1)035(2)(3)(5) , S, ZNote Part number definitions:(1) Capacitance tolerance: K, M(2) Termination and packaging: C, E, H, L(3) Reliability level: A, S, Z(4) Reliability level: A, B, S, Z(5) Surge current: A, B, S(6) Reliability level: S, Sprague Revision: 16-Jul-20194 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; 26 VDC AT +125 C100HT97H107M040(2)(6)(5) , Z50 VDC AT +85 C; 33 VDC AT +125 C15ET97E156(1)050(2)(4)(5) , B, S, Z15RT97R156(1)050(2)(4)(5) , B, S, Z22RT97R226(1)050(2)(4)(5) , B, S, Z33FT97F336(1)050(2)(3)(5) , S, Z47HT97H476(1)050(2)(3)(5) , S, Z47ZT97Z476(1)050(2)(4)(5) , B, S, Z47NT97N476(1)050(2)(4)(5) , B, S, Z63 VDC AT +85 C; 42 VDC AT +125 C10DT97D106(1)063(2)(3)(5) , S, Z15RT97R156(1)063(2)(4)(5) , B, S, Z22FT97F226(1)063(2)(3)(5) , S, Z33HT97H336(1)063(2)(6)(5) , Z33ZT97Z336(1)063(2)(3)(5) , S, Z75 VDC AT +85 C; 50 VDC AT +125 C10RT97R106(1)075(2)(6)(5) , Z15RT97R156M075(2)(6)(5) , Z15FT97F156M075(2)(6)(5) , Z22ZT97Z226(1)075(2)(6)(5) , Z22HT97H226(1)075(2)(6)(5) , ZTYPICAL CURVES ESR AND Z VS.

6 FREQUENCYSTANDARD RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCL AT +25 C ( A)MAX. DF AT +25 C 120 Hz(%)MAX. ESRAT +25 C 100 kHz (m )MAX. RIPPLE 100 kHzIRMS (A)AVAILABLERELIABILITY LEVELSNote Part number definitions:(1) Capacitance tolerance: K, M(2) Termination and packaging: C, E, H, L(3) Reliability level: A, S, Z(4) Reliability level: A, B, S, Z(5) Surge current: A, B, S(6) Reliability level: S, F - 4 V, Case Size R 1st line2nd line2nd lineImpedance / ESR ( )Frequency (kHz) F - 10 V, Case Size E 1st line2nd line2nd lineImpedance / ESR ( )Frequency (kHz) Sprague Revision: 16-Jul-20195 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT DISSIPATIONCASE CODEMAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 C (W) IN FREE , F, CURVES ESR AND Z VS.

7 F - V, Case Size V 1st line2nd line2nd lineImpedance / ESR ( )Frequency (kHz) F - V, Case Size R 1st line2nd line2nd lineImpedance / ESR ( )Frequency (kHz) F - 4 V, Case Size V 1st line2nd line2nd lineImpedance / ESR ( )Frequency (kHz) Sprague Revision: 16-Jul-20196 Document Number: 40092 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT PACKAGING QUANTITYCASE CODEUNITS PER REEL7" FULL REEL7" HALF REELV1000500D400200E500250R300150F250125 Z250125M200100H200100N200100 PRODUCT INFORMATIONC onformal Coated DimensionsPackaging DimensionsMoisture Sensitivity (MSL) GUIDESS olid Tantalum Selector Tantalum Chip Asked Coated Sprague Revision: 10-Mar-20201 Document Number: 40150 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

8 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT for Conformal Coated Tantalum CapacitorsINTRODUCTIONT antalum electrolytic Capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the Tantalum / Tantalum oxide / manganese dioxide system make Solid Tantalum Capacitors an appropriate choice for today's surface mount assembly Sprague has been a pioneer and leader in this field, producing a large variety of Tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore.

9 This combination is known as tantalite when its contents are more than one-half Tantalum . Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for Tantalum applications, and particularly Capacitors , consume the largest share of world Tantalum production. Other important applications for Tantalum include cutting tools ( Tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military Sprague is a major user of Tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum BASICS OF Tantalum CAPACITORSMost metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper.

10 A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called valve metals and include titanium, zirconium, niobium, Tantalum , hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all Tantalum electrolytic Capacitors is Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant.