SPEC DATA - Pro-Twist

1 SD02205-24-16 Product SpecificationsHEX WASHER HEAD SELF-DRILL SCREW #12 and 1/4 BODY DIAMETERPTSelf-Drilling Screws Ultimate Connection Value ChartNominalScrewDia. (in) (Lb)Tension(Pull) Lbs1 pcShear tometalMinimumTorsionalStrength (Lb) Guidelines 0-2500rpm Screwgun with torque adjustment - Overdriving may result in fastener failure or stripout of the work surfaceThe fastener is fully seated when the head s bearing surface is flush with the fastener must penetrate beyond the metal a minimum of three threads to comply with the Value ChartsScrews driven into steel were driven with three exposed threads on the off side of the connection, then pulled out withtesting that all results were obtained in strict adherence to ASTM test protocol. These ultimate figures areoffered only as a guide and are not guaranteed in any way by PrimeSource Building Products.

2 A 4:1 safety ratiois A/F5/16 A/F5/16 A/F5/16 A/F5/16 A/F5/16 A/F5/16 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 A/F3/8 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 .110 FULLFULLFULLFULLFULLFULLFULLFULLFULLFULL FULLFULLFULLFULLFULLFULLFULLHWD12034 HWD12100 HWD12114 HWD12112 HWD12200 HWD12212 HWD12300 HWD14034 HWD14100 HWD14114 HWD14112 HWD14200 HWD14212 HWD14300 HWD14400 HWD14500 HWD146003/411-1/41-1/222-1/233/411-1/41- 1/222-1 #FinishBulk Drill CapacityZincZincZincZincZincZincZincZinc ZincZincZincZincZincZincZincZincZincHead 24 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-11724 hr. min.

3 B-11724 hr. min. B-11724 hr. min. B-11724 hr. min. B-117 ThreadDrill 1408 Pro-Twist drill screws meet or exceed ASTM C-954 and/or C-1513 2016 PrimeSource Building Products, to PRIMESOURCE FASTENERS ARE MANUFACTURED IN AN ISO 9002 AND ISO 14001 CERTIFIED AND APPROVED FACTORYTO PRIMESOURCE PERFORMANCE SPECIFICATIONS AND PRINT data Submittal Sheet # 022