Example: confidence
SPECIAL STEELS - Bohler Uddeholm
TABLE OF CONTENTS Innovation is a Böhler Tradition 3 Melting 5 Forming 7 Machining 9 Powder Metallurgy 11 High Speed Steel 13 Cold Work Tool Steel 15
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Welding of tool steel - Bohler Uddeholm
www.bohler-uddeholm.co.zaWelding of tool steel 3 Introduction The weldability of steels with more than 0,2% carbon is usually considered to be poor. Hence, tool steels with 0,3–2,5%
Grinding of tool steel - Bohler Uddeholm
www.bohler-uddeholm.co.zaGrinding of Tool Steel 3 1. Aluminium oxide is the abrasive most com- monly used for grinding steel, and is available in several variants. It can be alloyed with other oxides, of …
HOTVAR - Bohler Uddeholm
www.bohler-uddeholm.co.za4 HOTVAR Heat treatment— general recommen-dations SOFT ANNEALING Protect the steel and heat through to 820°C (1500°F). Then cool in the furnace at 10°C (20°F)
ARNE - Bohler Uddeholm
www.bohler-uddeholm.co.zaARNE 3 COMPRESSIVE STRENGTH The figures are to be considered approximate. Rc0,2 Hardness N/mm2 ksi 62 HRC 2200 319 60 HRC 2150 312 55 …
BÖHLER EDELSTÄHLE UND WERKZEUGE FÜR ROHR …
www.bohler-uddeholm.co.za1 bÖhler edelstÄhle und werkzeuge fÜr rohr- und strangpressen bÖhler special steels and tools for tube and rod extrusion
CALMAX - Bohler Uddeholm
www.bohler-uddeholm.co.zaCALMAX 3 900 925 950 975 1000 °C 1650 1695 1740 1785 1830 °F Hardness and retained austenite as a function of
STAVAX ESR - Bohler Uddeholm
www.bohler-uddeholm.co.zaSTAVAX ESR 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses.
welding consumables for aluminium - Bohler …
www.bohler-uddeholm.co.zaStandard . Materia -No. DIN 732 AWS A5.3 Application field 3.0516 EL-AIMnl E 3003 UTP 49 Aluminium stick electrode with' ,5 % Si and special coating
Related documents
HOTVAR - Bohler Uddeholm
www.bohler-uddeholm.co.za2 HOTVAR General HOTVAR is a high performance molybdenum- vanadium alloyed hot-work tool steel which is characterized by: • High hot wear resistance • Very good high temperature properties
Fickboken eng 1-55 21/10-08 - Uddeholm
www.uddeholm.nl1 ddeholm Tooling Pocket Book presents, in a concise form, the Uddeholm range of high quality tool steel developed to meet specific needs and applications.
Die Casting Tooling Grades - Bohler Uddeholm
www.bucorp.comGrade D: NADCA 207-2006—In applications when high toughness is required, due to gross cracking or heat checking issues, but temper resistance is not as critical, an H11 type alloy can be considered.