Specifications - Moen Incorporated

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 1-1/2" (38mm) MAX DECK THICKNESS 8" (203mm) 16"(406mm) CENTERS Quick Connect Hose Assembly CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800 …

  Specification, Drip

Specifications - Moen Incorporated

Vessel Extension x2 Back Splash 2-1/2" min for lift rod operation 15" ... Specifications FOR MORE INFORMATION CALL: 1-800-BUY-MOEN Rev. 8/15 www.moen.com There is more than 1 version of this model. Page down to identify the version you have.

  Specification, Vessel

Specifications - Moen Incorporated

10-1/4" x 2-1/2" (260mm x 64mm) ... THROUGH 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA. Specifications TO ORDER PARTS CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) 8/18 There is more than one version of this model. Page down to identify the version you have. FAUCET DESCRIPTION ... • When filling a vessel outside the …

  Specification, Vessel

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations EVA™ Two Handle Widespread Lavatory Faucet Models: T6420 series Valve: 9000, 69000 NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.

  Drip

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com. CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 11/18. 6-3/8" (162mm) 3-5/16" (84mm) 2-1/2" (63mm) Max. Optional Escutcheon 6" (152mm) 4-3/16" (106mm) 3" (76mm) 1-9/16" (40mm) 2" (51mm) 3/8" (9.5mm) 5" (127mm) 30" (762mm) Lift Rod. There is more than one version of this model. Page down to ...

  Information, Specification

Moen 3-Function Diverter Valve

® 3-Function Diverter Valve Design multiple-outlet showers with unlimited configurations using the new 3-Function Diverter Valve from Moen. The neutral trim styling of the 3-Function Diverter Valve works with any Moen bath suite of your choice. Pair it with a Moentrol® valve showerhead and a hand shower or body sprays

  Functions, Valves, Moen, Diverter, Diverter valves, Moen 3 function diverter valve

THREE HANDLE TUB AND SHOWER VALVE

DIVERTER DIVERTER BONNET ACRYLIC HANDLE KNOB KIT HANDLE SCREW I.P.S. CONNECTION GROUND JOINT VALVE BODY CENTER PORT STEM EXTENSION WALL TUBE WARNING: Do not solder the threads or apply heat to the valve. Serious internal damage could result. Valve body must be installed with the hot and cold water supply inlets at the …

  Valves, Diverter, Diverter diverter

Illustrated Parts - Moen Incorporated

Hardware Kit 93959 Mounting Hardware 103759 Hardware Package 12715 Rev. 11/18 Valve body Kit 174292 - Hot 174291 - Cold Spout Shank & O Rings 100702 O-Rings (2) 103466 Stem Extension Kit 174290 Cartridge Removal Tool 14272 M•pactSystem Duralock Hose Kit 114299 Pop-Up Plug & Seat 10709 Chrome There is more than one version of this model.

  Hardware, Part, Removal, Illustrated, Illustrated parts

Illustrated Parts

TO ORDER PARTS CALL: 1-800-BUY-MOEN Rev. 10/18 www.moen.com Wand Kit (2.2 gpm) 131380 Chrome 131380CSL Classic Stainless 131380ORB Oil Rubbed Bronze 131380BL Matte Black Wand Kit (1.5 gpm) 161150 Chrome 161150CSL Classic Stainless 161150ORB Oil Rubbed Bronze 161150BL Matte Black 162469SRS Spot Resist Stainless Hose Kit

Illustrated Parts

O-ring Desk Gasket Kit (For single hole mtg only) 174352 Plug Button 151644 Red/Blue 152859 Chrome 152859CSL Classic Stainless 152859SRS Spot Resist Stainless Set Screw (Requires 3/32” hex key) 155023 Cartridge, Cartridge Nut & Set Screw 1255 Pull Out Wand (1.5 gpm) 169246 Chrome 169246SRS Spot Resist Stainless Wand Screen & O-ring Kit (1 ...

  Hole

ISE SPECIFICATIONS SHEET EVOLUTION PRO 880LT HIGH

Job Specifications Specifications Food Waste Disposer(s) shall be InSinkErator Model PRO 80LT™ with MultiGrind® and SoundSeal® technologies, 7/8 HP motor, Aut o-Reverse Grind System® feature and Stainless Steel Grind components. Warranty: We Come To You® 10-Year In-Home Limited Warranty. Sample Specification

  Specification, Specifications specifications

Badger 5 Specification Sheet - InSinkErator

Job Specifications Specifications Food Waste Disposer(s) shall be InSinkErator Badger® 5, continuous feed, with 1/2 H.P. motor, galvanized steel grinding elements with two stainless steel 360° swivel lugs. Self-service wrench. Available with or without a factory installed power cord. Warranty: 3-Year parts and in-home service. Sample ...

  Specification, Specifications specifications, Badger, 4 571, Badger 5 specification

GS1 General Specifications

Specification should determine whether there are any patents that may encompass a specific implementation that the organisation is developing in compliance with the Specification and whether a licence under a patent or other intellectual property right is needed.

  General, Specification, Gs1 general specifications

Smart Battery Data Specification

May 01, 2012 · mechanical specifications are covered by other specifications (refer to the References section). This specification is generic with regard to the type of battery chemistry, the battery pack voltage, the battery pack capacity as well as the battery pack's physical packaging. 1.2. Audience The audience for this document includes:

  Specification, Battery

GS1 Product Image Specification Standard

GS1®, under its IP Policy, seeks to avoid uncertainty regarding intellectual property claims by requiring the participants in the Work Group that developed this GS1 Product Image Specification Standard to agree to grant to GS1 members a royalty-free licence or a RAND licence to Necessary Claims, as that term is defined in the GS1 IP Policy.

  Specification

Monogram - CertainTeed

Sample Short Form Specification: Siding as shown on drawings or specified herein shall be Monogram Vinyl Siding as manufactured by CertainTeed LLC, Malvern, PA. The siding shall have a .092" thick nail hem. Installation shall be in accordance with manufacturer’s instructions.

  Specification, Certainteed

Specifications - Moen Incorporated

Specifications. DESCRIPTION •etal construction with various finishes identified by suffix M •lexible supply lines with 3/8" compression fittings F •ncludes metal pop-up waste assembly I •ncludes optional 3 hole deck plate (escutcheon) I •ncludes Red/Blue Temperature Indicators I.

  Specification

Specification – WSET Level 2 Award in Wines

This Specification contains necessary information for both candidates and Approved Programme Providers (APPs) about the WSET Level 2 Award in Wines. The main part of the document is a detailed statement of the learning outcomes for the Level 2 Award in Wines. These outcomes should be used by APPs to prepare programmes of learning, and

  Specification