Specifications - Moen Incorporated

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 1-1/2" (38mm) MAX DECK THICKNESS 8" (203mm) 16"(406mm) CENTERS Quick Connect Hose Assembly CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800 …

  Specification, Drip

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations EVA™ Two Handle Widespread Lavatory Faucet Models: T6420 series Valve: 9000, 69000 NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.

  Drip

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com. CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 11/18. 6-3/8" (162mm) 3-5/16" (84mm) 2-1/2" (63mm) Max. Optional Escutcheon 6" (152mm) 4-3/16" (106mm) 3" (76mm) 1-9/16" (40mm) 2" (51mm) 3/8" (9.5mm) 5" (127mm) 30" (762mm) Lift Rod. There is more than one version of this model. Page down to ...

  Information, Specification

Specifications - Moen Incorporated

10-1/4" x 2-1/2" (260mm x 64mm) ... THROUGH 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA. Specifications TO ORDER PARTS CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) 8/18 There is more than one version of this model. Page down to identify the version you have. FAUCET DESCRIPTION ... • When filling a vessel outside the …

  Specification, Vessel

Moen 3-Function Diverter Valve

® 3-Function Diverter Valve Design multiple-outlet showers with unlimited configurations using the new 3-Function Diverter Valve from Moen. The neutral trim styling of the 3-Function Diverter Valve works with any Moen bath suite of your choice. Pair it with a Moentrol® valve showerhead and a hand shower or body sprays

  Functions, Valves, Moen, Diverter, Diverter valves, Moen 3 function diverter valve

THREE HANDLE TUB AND SHOWER VALVE

DIVERTER DIVERTER BONNET ACRYLIC HANDLE KNOB KIT HANDLE SCREW I.P.S. CONNECTION GROUND JOINT VALVE BODY CENTER PORT STEM EXTENSION WALL TUBE WARNING: Do not solder the threads or apply heat to the valve. Serious internal damage could result. Valve body must be installed with the hot and cold water supply inlets at the …

  Valves, Diverter, Diverter diverter

Illustrated Parts - Moen Incorporated

Hardware Kit 93959 Mounting Hardware 103759 Hardware Package 12715 Rev. 11/18 Valve body Kit 174292 - Hot 174291 - Cold Spout Shank & O Rings 100702 O-Rings (2) 103466 Stem Extension Kit 174290 Cartridge Removal Tool 14272 M•pactSystem Duralock Hose Kit 114299 Pop-Up Plug & Seat 10709 Chrome There is more than one version of this model.

  Hardware, Part, Removal, Illustrated, Illustrated parts

Illustrated Parts

TO ORDER PARTS CALL: 1-800-BUY-MOEN Rev. 10/18 www.moen.com Wand Kit (2.2 gpm) 131380 Chrome 131380CSL Classic Stainless 131380ORB Oil Rubbed Bronze 131380BL Matte Black Wand Kit (1.5 gpm) 161150 Chrome 161150CSL Classic Stainless 161150ORB Oil Rubbed Bronze 161150BL Matte Black 162469SRS Spot Resist Stainless Hose Kit

Illustrated Parts

O-ring Desk Gasket Kit (For single hole mtg only) 174352 Plug Button 151644 Red/Blue 152859 Chrome 152859CSL Classic Stainless 152859SRS Spot Resist Stainless Set Screw (Requires 3/32” hex key) 155023 Cartridge, Cartridge Nut & Set Screw 1255 Pull Out Wand (1.5 gpm) 169246 Chrome 169246SRS Spot Resist Stainless Wand Screen & O-ring Kit (1 ...

  Hole

TUB AND SHOWER VALVES - Moen Incorporated

These valves are equipped with Moen's long-life 1225 cartridge, de-signed for smooth, trouble free operation. When soldering, do not heat valve any higher than necessary tof low the s older. Over-heating may damage the cartridge or rubber stop valves. Following this direction will allow you to sol-der without removing the cartridge or rubber ...

  Valves, Cartridge

Specifications - images.thdstatic.com

• Various finishes identified by suffix • Magnetix™ technology features an innovative magnetic docking system • Includes rainshower, handshower, hose and magnetic docking system • 60" double interlock spiral hose (metal), for Chrome and Spot Resist Brushed Nickel finishes • 1/2" IPS connection OPERATION

  Specification, Metal, Finishes

MASTER SPECIFICATIONS Division 09 FINISHES

master specifications: division 09 – finishes . section # title 09 2216 non-structural metal framing . 09 2900 gypsum board . 09 3013 ceramic tiling . 09 6340 stone flooring . 09 6513 resilient base and accessories . 09 6519 resilient tile flooring . 09 6613 portland cement terrazzo flooring . 09 6623 resinous matrix terrazzo flooring

  Metal, Finishes

EXTERIOR FINISHES - Nudura

instructions. As stated with respect to other finishes, the wire mesh (or expanded metal lath) will need to be mechanically connected to the fastening strips using screws and NOT nails. As with acrylic based stuccos, the surface of the EPS usually needs to be rasped to ensure a strong bond of the base coat to the foam. Hard coat stuccos can vary in

  Metal, Finishes, Exterior, Exterior finishes

Specifications - Moen Incorporated

• Metal construction with various finishes identified by suffix • 1/2" IPS connections OPERATION • Lever style handles • Maximum handle rotation angle is 90˚ to full on for either handle • Hot side counterclockwise to open (clockwise to close)

  Metal, Finishes

HAMMERITE TECHNICAL GUIDE

Smooth & Hammered finishes). Hammerite Direct To Rust Metal Paint is a single pack air-drying coating which delivers a decorative, corrosion resistant finish. Hammerite is fast drying and can be recoated after 4 hours. The specially selected resins impart a …

  Metal, Finishes

COLOUR AND FINISHES GUIDE - Vicwest

The colours and finishes shown in this chart may not be available in all profiles or steel gauges. Check with your Vicwest sales representative to confirm colour availability by product. Custom Colours and Paint Finishes are available. Please contact …

  Finishes