Example: air traffic controller
Specifications - Moen Incorporated
TUB/SHOWER SURROUND DIAMETER WALL OPENING POSI-TEMP® VALVE Pressure-Balancing Valve Model: 2510 (IPS), 2520 (CC), single pack 62300 (IPS)(Bulk packed 12 per carton) DESCRIPTION • Brass construction • 1/2" IPS connections • Pressure balancing, four port, cycle valve • Includes pre-installed test plug (cartridge also included inside carton)
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
THREE HANDLE TUB AND SHOWER VALVE
assets.moen.comDIVERTER DIVERTER BONNET ACRYLIC HANDLE KNOB KIT HANDLE SCREW I.P.S. CONNECTION GROUND JOINT VALVE BODY CENTER PORT STEM EXTENSION WALL TUBE WARNING: Do not solder the threads or apply heat to the valve. Serious internal damage could result. Valve body must be installed with the hot and cold water supply inlets at the …
Moen 3-Function Diverter Valve
assets.moen.com® 3-Function Diverter Valve Design multiple-outlet showers with unlimited configurations using the new 3-Function Diverter Valve from Moen. The neutral trim styling of the 3-Function Diverter Valve works with any Moen bath suite of your choice. Pair it with a Moentrol® valve showerhead and a hand shower or body sprays
Specifications - Moen Incorporated
assets.moen.com• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations EVA™ Two Handle Widespread Lavatory Faucet Models: T6420 series Valve: 9000, 69000 NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.
Illustrated Parts - Moen Incorporated
assets.moen.comHardware Kit 93959 Mounting Hardware 103759 Hardware Package 12715 Rev. 11/18 Valve body Kit 174292 - Hot 174291 - Cold Spout Shank & O Rings 100702 O-Rings (2) 103466 Stem Extension Kit 174290 Cartridge Removal Tool 14272 M•pactSystem Duralock Hose Kit 114299 Pop-Up Plug & Seat 10709 Chrome There is more than one version of this model.
Specifications - Moen Incorporated
assets.moen.com• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 1-1/2" (38mm) MAX DECK THICKNESS 8" (203mm) 16"(406mm) CENTERS Quick Connect Hose Assembly CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800 …
Specifications
assets.moen.comFOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com. CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 11/18. 6-3/8" (162mm) 3-5/16" (84mm) 2-1/2" (63mm) Max. Optional Escutcheon 6" (152mm) 4-3/16" (106mm) 3" (76mm) 1-9/16" (40mm) 2" (51mm) 3/8" (9.5mm) 5" (127mm) 30" (762mm) Lift Rod. There is more than one version of this model. Page down to ...
Specifications - Moen Incorporated
assets.moen.comVessel Extension x2 Back Splash 2-1/2" min for lift rod operation 15" ... Specifications FOR MORE INFORMATION CALL: 1-800-BUY-MOEN Rev. 8/15 www.moen.com There is more than 1 version of this model. Page down to identify the version you have.
Specifications - Moen Incorporated
assets.moen.com10-1/4" x 2-1/2" (260mm x 64mm) ... THROUGH 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA. Specifications TO ORDER PARTS CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) 8/18 There is more than one version of this model. Page down to identify the version you have. FAUCET DESCRIPTION ... • When filling a vessel outside the …
Illustrated Parts
assets.moen.comTO ORDER PARTS CALL: 1-800-BUY-MOEN Rev. 10/18 www.moen.com Wand Kit (2.2 gpm) 131380 Chrome 131380CSL Classic Stainless 131380ORB Oil Rubbed Bronze 131380BL Matte Black Wand Kit (1.5 gpm) 161150 Chrome 161150CSL Classic Stainless 161150ORB Oil Rubbed Bronze 161150BL Matte Black 162469SRS Spot Resist Stainless Hose Kit
Illustrated Parts
assets.moen.comO-ring Desk Gasket Kit (For single hole mtg only) 174352 Plug Button 151644 Red/Blue 152859 Chrome 152859CSL Classic Stainless 152859SRS Spot Resist Stainless Set Screw (Requires 3/32” hex key) 155023 Cartridge, Cartridge Nut & Set Screw 1255 Pull Out Wand (1.5 gpm) 169246 Chrome 169246SRS Spot Resist Stainless Wand Screen & O-ring Kit (1 ...
Related documents
Temptrol - Symmons
www.symmons.comTub/Shower, Shower or Tub System (figure 2A) model C Tub/Shower System: The valve in this system has a built-in choke for use with a diverter spout. Follow piping instructions for Model A valve. ˜nish wall face 4" (101mm) Max 2 3 8 '' 60mm 1 2 CL supplies + 3" (75mm) Min plaster shield (T-176) fIGure 1 Shower System: Pipe shower head from ...
Going Home with a Pneumostat™ Chest Drain Valve
www.uhn.caValve You are ready to go home, but you still need a chest tube. A small device called a ... • You may shower with a chest tube in. Remove the dressing before you shower and let the water run over the site. Do NOT apply soap or scrub the area. When you are finished your shower, pat the area dry and apply a new ...
INS2153C - 6/14 - Moen Incorporated
assets.moen.comTub/Shower Position the valve body 32 inches from the floor of the tub basin. The shower arm should be placed 78 inches above the floor of the tub basin (recommended installa-tion of the shower arm is with a flanged elbow fitting – not included– and attached to a wood brace). The tub spout is to be no less than 6 inches and no greater than
Schluter -Shower System Installation Handbook 2020
pdf.lowes.comSchluter®-Shower System The Schluter®-Shower System is an integrated family of products that creates a “sealed” system. First, the Schluter®-KERDI-DRAIN is installed in conjunction with either a sloped mortar bed or the Schluter®-KERDI-SHOWER-T/-TS/-TT prefabricated foam trays. The KERDI-DRAIN provides a simple and secure
Curbless Showers - NCSU
projects.ncsu.eduinch by 60-inch or deeper curbless shower. Even at 36 inches, very careful attention must be paid to the floor > 3 > 60Ó min. 27Ó max. for controls/ hand-held shower-head mounted on back wall 60Ó min. 27Ó max. for controls/ hand-held shower-head mounted on back wall 30Ó permitted 36Ó min. recommended 30Ó permitted 36Ó min. recommended ...
ANSI / ISEA Z358.1-2014 Compliance Checklist
www.gesafety.comoff valve on the water line, upstream of the unit, to facilitate maintenance of the equipment. If a shut off valve is installed, provision must be made to prevent unauthorized closure of the shut off valve. (Sections 4.1.2, 4.5.5, 5.1.6, 5.4.5, 6.1.6, 6.4.5, 8.2.3.3) Such provision can include removing the handle of
PW1B: Schedule B Plimbing, Sprinkler, Standpipe
www1.nyc.govStreet Name. Borough. Block. Lot: BIN. CB No. Work on Floor(s) 2 Filing components/fixtures? Yes No. Work Type Information Required for all applications.Select all that apply. Plumbing - PL