Example: bankruptcy

SRX 2200 Model 1 Portable User Guide - …

SRX TWO-WAY RADIOSSRX 2200 Model Page 1 Wednesday, March 27, 2013 7:02 Page 2 Monday, June 10, 2013 1:06 PMEnglishmASTRO SRX 2200 Series Digital Portable RadiosQuick Reference CardRF Energy Exposure and Product Safety Guide for Portable Two-Way RadiosATTENTION!This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Controls Radio On/OffZones and ChannelsReceiving and TransmittingSending an Emergency Alarm* Default emergency button press timer is set to 1 second. This timer is programmable, see page 34 in the user Guide for exit emergency at any time, press and hold the Emergency (Orange) Button_____2-Position Concentric Switch_____3-Position A/B/C Switch _____Accessory Connector CoverMicrophone On On/Off/Volume knob clockwise.

SRX™ TWO-WAY RADIOS SRX 2200 MODEL 1.5 USER GUIDE SRX2200_M1.5_FrontCover.fm Page 1 Wednesday, March 27, 2013 7:02 PM

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of SRX 2200 Model 1 Portable User Guide - …

1 SRX TWO-WAY RADIOSSRX 2200 Model Page 1 Wednesday, March 27, 2013 7:02 Page 2 Monday, June 10, 2013 1:06 PMEnglishmASTRO SRX 2200 Series Digital Portable RadiosQuick Reference CardRF Energy Exposure and Product Safety Guide for Portable Two-Way RadiosATTENTION!This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Controls Radio On/OffZones and ChannelsReceiving and TransmittingSending an Emergency Alarm* Default emergency button press timer is set to 1 second. This timer is programmable, see page 34 in the user Guide for exit emergency at any time, press and hold the Emergency (Orange) Button_____2-Position Concentric Switch_____3-Position A/B/C Switch _____Accessory Connector CoverMicrophone On On/Off/Volume knob clockwise.

2 Off On/Off/Volume knob counterclockwise. Zone Zone switch to desired zone. Channel Channel switch to desired Button 1_____Side Button 2_____PTT ButtonOn/Off/Volume Control Knob16-Position Select Knob _____Top Side (Select) Button_____Main SpeakerTop DisplayAntennaBluetooth Pairing IndicatorMicrophone1 Select for a and hold Volume Set Monitor button and listen for volume, if the PTT button to transmit; release to and hold the Emergency button*. 2 The display shows EMERGNCY and the current zone/channel. A short, medium-pitched tone sounds, and the LED blinks red acknowledgment is received, you hear four beeps; alarm ends; and radio exits emergency.*PMLN6131C*MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.

3 All other trademarks are the property of their respective owners. 2011, 2013 by Motorola Solutions, Inc. All Rights Reserved. 06/13. 1303 East Algonquin Road., Schaumburg, Illinois 60196, Page 3 Monday, June 10, 2013 1:06 PMEnglishSending an Emergency CallTo exit emergency at any time, press and hold the Emergency a Silent Emergency CallTo exit emergency at any time, press and hold the Emergency Status Icons1 Press the Emergency button. 2 Press and hold the PTT button. Speak clearly into the the PTT button to end and hold Emergency button to exit emergency. 1 Press the Emergency button. 2 The display does not change; the LED does not light up, and there is no emergency continues until you:Press and hold the Emergency button to exit emergency and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call when the battery is more stripes, the stronger the signal strength for the current site (trunking only).

4 Direct radio to radio communication or connected through a = DirectOff = RepeaterThis channel is being = Radio is set at Low = Radio is set at High a scan dot = Detects activity on the Priority-One Channel during dot = Detects activity on the Priority-Two Channel during vote scan feature is = Secure = Clear = Receiving an encrypted voice steady = View modeBlinking = Program modeUVOMHOR LijkmBasic Zone Bank 1A = Radio is in Zone = Radio is in Zone = Radio is in Zone Zone Bank 2D = Radio is in Zone = Radio is in Zone = Radio is in Zone Zone BankA = Contains Zone 1, Zone 2 and Zone 3,B = Contains Zone 4, Zone 5 and Zone 6,C = Contains Zone 7, Zone 8 and Zone 9,..X = Contains Zone 70, Zone 71 and Zone 72,Y = Contains Zone 73, Zone 74 and Zone 75. Bluetooth is is connected to the Bor CDorEor FA, B.

5 X or Page 4 Monday, June 10, 2013 1:06 PMDeclaration of ConformityEnglishiDeclaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown OF CONFORMITYPer FCC CFR 47 Part 2 Section (a)Responsible Party Name: Motorola Solutions, : 1303 East Algonquin Road, Schaumburg, Illinois 60196, Number: 1-800-927-2744 Hereby declares that the product: Model Name: SRX 2200conforms to the following regulations:FCC Part 15, subpart B, section (a), (d) and section (a)Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired Page i Monday, June 10, 2013 1:06 PMDeclaration of ConformityEnglishiiNote:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

6 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

7 Consult the dealer or an experienced radio/TV technician for Page ii Monday, June 10, 2013 1:06 PMContentsEnglishiiiContentsThis User Guide contains all the information you need to use the SRX 2200 Series Digital Portable of Conformity ..iImportant Safety Information ..viiiRF Energy Exposure and Product Safety Guide for Portable Two-Way Radios .. viiiSoftware Version ..ixNotice to Users (FCC and Industry Canada) ..ixInformations importantes sur la s curit .. xExposition aux radiofr quences et s curit du produit pour radios bidirectionnelles portatives .. xVersion du logiciel ..xiAvis aux utilisateurs (FCC et Industrie Canada) ..xiComputer Software Copyrights .. xiiDocumentation Copyrights .. xiiDisclaimer .. xiiiGetting Started ..1 How to Use This Guide .. 1 Notations Used in This Manual.

8 1 Additional Performance Enhancement .. 2 Dynamic System Resilience (DSR) .. 2 CrossTalk Prevention .. 2 Encrypted Integrated Data (EID) .. 2 SecureNet .. 2 What Your Dealer/System AdministratorCan Tell You .. 3 Preparing Your Radio for Use ..3 Charging the Battery .. 4 Battery Charger .. 4 Attaching the Battery .. 4 Attaching the Antenna .. 5 Attaching the Accessory Connector Cover .. 6 Attaching the Belt Clip .. 7 Turning On the Radio .. 7 Adjusting the Volume .. Page iii Monday, June 10, 2013 1:06 PMContentsEnglishivIdentifying Radio Controls ..9 Radio Parts and Controls .. 10 Programmable Features .. 11 Assignable Radio Functions .. 11 Assignable Settings or Utility Functions .. 12 Accessing the Preprogrammed Functions .. 12 Push-To-Talk (PTT) Button.

9 13 Identifying Status Indicators ..13 Status Icons .. 13 LED Indicator .. 16 Intelligent Lighting Indicators .. 17 Alert Tones .. 18 General Radio Operation ..22 Selecting a Zone .. 22 Selecting a Radio Channel .. 23 Receiving and Responding to a Radio Call .. 23 Receiving and Responding to a Talkgroup Call .. 24 Receiving and Responding to a Private Call (Trunking Only) .. 24 Receiving and Responding to a Telephone Call (Trunking Only) .. 25 Making a Radio Call .. 25 Making a Talkgroup Call ..25 Repeater or Direct Operation .. 26 Monitoring Features .. 26 Monitoring a Channel ..27 Conventional Mode Operation ..27 Advanced Features .. 28 Advanced Call Features .. 28 Receiving and Responding to a Selective Call (Conventional Only) ..28 Using the Dynamic Regrouping Feature (Trunking Only).

10 29 Requesting a Reprogram (Trunking Only) ..29 Classifying Regrouped Radios ..30 Scan Lists .. 30 Viewing a Scan List ..30 Viewing and Changing the Priority Status ..31 Scan .. 31 Turning Scan On or Off ..31 Making a Dynamic Priority Change (Conventional Scan Only) ..32 Deleting a Nuisance Channel ..32 Restoring a Nuisance Channel ..32 Call Alert Paging .. Page iv Monday, June 10, 2013 1:06 PMContentsEnglishvReceiving a Call Alert Page ..33 Emergency Operation .. 33 Sending an Emergency Alarm ..34 Sending an Emergency Call (Trunking Only) ..34 Sending an Emergency Alarm with Emergency Call ..35 Sending a Silent Emergency Alarm ..36 Using the Emergency Keep-Alive Feature ..36 Fireground (Conventional Only) .. 37 Entering Fireground Zone Channel ..37 Responding to Evacuation Indicator.


Related search queries