STA-RITE PL Series - resiflowlit.com

1 S4510 WSDurability and corrosion resistance are built into every PL Series Pump, due to the rugged fiberglass reinforced thermoplastic pump construction. The engineered composite components are lightweight yet extremely resistant to sand and abrasive wear. The non-corrosive design and exceptional strength assure years of trouble- free systems and for homes, farms and Body and Seal Plate: Dura-Glas Impeller: Noryl Nozzle: NorylVenturi: NorylO-Ring: Buna-NClamp: Stainless steelShaft: Stainless steelDiffuser: Reinforced polypropylene with brass wear ringShallow Well Jet: Sold separatelyPressure Switch Pre-Set: 30 50 PSIS uction Ports: Suction-over-DriveA Jet Package should be ordered with every PL Series pump. Pentair trademarks and logos are owned by Pentair plc or its affiliates. All other third party registered and unregistered trademarks and logos are the property of their respective Rustproof Construction: Pump body is Dura-Glas fiberglass reinforced thermoplastic lightweight, rustproof and exceptionally strong.

2 All components in contact with water are resistant to the corrosive and abra sive forces found in the most aggres sive water Diffuser: Multi-port, reinforced polypropylene design primes faster and handles more Impeller: Precision-molded Noryl gives per fect balance and ultra-smoothness for highest performance and Regulator and Gauge: Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge Seal: Stainless steel heat sink provides maximum cooling of the mechanical shaft Motor: Dustproof canopy completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor Serviceability: PL pumps are disassembled by removing the stainless steel clamp.

3 Piping does not have to be disturbed. Seal replace ment takes only a few minutes. Control room motor design makes all components easily PL SeriesCorrosion-resistant, convertible deep well jet pumpsORDERING INFORMATIONCATA LOG NUMBERHPDESCRIPTIONPIPE TAPPIPNG SIZESMOTOR VOLTAGEAPPROX. WT. Well Jet1-1/4"1"1"115/23027 PLD3/4 Deep Well Jet1-1/4"1"1"115/23028 PLE1 Deep Well Jet1-1/4"1"1"115/23030 PLF1-1/2 Deep Well Jet1-1/4"1"1"115/23036S4510WS2A1-1/2 MAX1-3/82-3/43-1/46-1/2B53-15/165-13/161 21-1/81-1/21 NPTDISCHARGE11-7/167-13/161/2 NPTSUCTION1 NPTDRIVE4-3/4 NPTSUCTION(ordered separately) Shallow Well Jetpsi20406080100 Dimensions (in inches) are for estimating purposes and rated in accordance with water Systems Council : Pumps installed with a Pro-Source tank require a 100 PSI relief valve.

4 Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief DIMENSIONSPUMP PERFORMANCE (Capacity in gallons per minute)SHALLOW WELLCATA LOG JET NUMBERPRESS. SWITCH SETTINGDYNAMIC SUCTION LIFT PRESSURE PSISHUT-OFF PRESSURE PSI20 PSI30 PSI40 PSI50 PSI60 PSIPLC1/2 PKG 1 - 21N30 505' ' ' ' ' 1- 22N30 505' ' ' ' ' 1- 23N30 505' ' ' ' ' 1- 24N30 505' ' ' ' ' PL SeriesCorrosion-resistant, convertible deep well jet pumpsCATA LOG NUMBERHPABPLC1/213-7/84-1/8 PLD3/414-5/84-1/8 PLE115-1/84-1/8 PLF1-1/216-1/84-7/163S4510 WSTested and rated in accordance with water Systems Council : Pumps installed with a Pro-Source tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve.

5 Relief valve must be capable of relieving entire flow of pump at relief PL SeriesCorrosion-resistant, convertible deep well jet pumpsPUMP PERFORMANCE (Capacity in gallons per minute)DEEP WELL (40 PSI) 4" DOUBLE PIPECAT. VENTURIUSES NOZZLE30'40'50'60'70'80'90'100'PLC1 PERFORMANCE (Capacity in gallons per minute)DEEP WELL (40 PSI) 2" SINGLE PIPECAT. VENTURIUSES NOZZLEPUMPING DEPTH IN FEET20'30'40'50'60'70'80'90'100'110'120' PLC1 WELL (40 PSI) 3" SINGLE PIPEPLC1 : 293 WRIGHT STREET, DELAVAN, WI 53115 PH: 888-782-7483 ORDERS FAX: 800-426-9446 CANADA: 490 PINEBUSH ROAD, UNIT 4, CAMBRIDGE, ONTARIO N1T 0A5 PH: 800-363-7867 ORDERS FAX: 888-606-5484 Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.

6 2018 Pentair plc. All Rights Reserved. S4510WS (03/22/18)