Standard 7-Segment SMD Display 10 mm

1 VDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev. , 29-Nov-131 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 7-Segment SMD Display 10 mmDESCRIPTIONThe series are 10 mm SMD seven segment LED displays in a very compact devices utilize AlInGaP on GaAs chip GROUP AND PACKAGE DATA Product group: Display Package: 10 mm Product series: SMD Angle of half intensity: 50 FEATURES Evenly lighted segments Grey package surface Untinted segments Luminous intensity categorized Yellow, green, and soft orange categorized for color Wide viewing angle Suitable for DC and high peak current Material categorization.

2 For definitions of compliance please see APPLICATIONS Panel meters Test- and measure-equipment Point-of-sale terminals Control units PARTS TABLEPARTCOLORLUMINOUS INTENSITY( cd)atIF(mA)WAVELENGTH(nm)atIF(mA)FORWARD VOLTAGE(V)atIF(mA) anodeVDMO10A1 Soft anodeABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1 PARAMETERTEST CONDITIONSYMBOLVALUEUNITP ower dissipation per segment PV70mWPeak forward current per segment (frequency 1 kHz, 10 % duty cycle)IF60mAContinous forward current per segmentIF25mAForward current derating from 25 COperating temperature rangeTamb-35 to +105 CStorage temperature rangeTstg-35 to +105 CIron soldering conditions: 1/16" below seating plane for 3 s at 260 CVDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev.

3 , 29-Nov-132 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.(2)Reverse voltage is only for IR can not continue to operate at this situation.(3)Cross talk specification %.Notes(1)Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.(2)Reverse voltage is only for IR can not continue to operate at this situation.(3)Cross talk specification %.Notes(1)Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

4 (2)Reverse voltage is only for IR can not continue to operate at this situation.(3)Cross talk specification %.OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VDMR10A1, SUPER REDPARAMETERTEST intensity (1)IF = 1 mAVDMR10A1IV4501600- cdIF = 10 mAVDMR10A1IV-20 800- cdDominant wavelengthIF = 20 mAVDMR10A1 d-631-nmPeak emmision wavelengthIF = 20 mA p-639-nmSpectral line half-widthIF = 20 mA -20-Forward voltage per segmentIF = 20 current per segment (2)VR = 5 VIR--100 ALuminous intensity matching ratioIF = 10 mAIv-m--2:1 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VDMO10A1, SOFT ORANGEPARAMETERTEST intensity (1)IF = 1 mAVDMO10A1IV180650- cdIF = 10 mAVDMO10A1IV-8250- cdDominant wavelengthIF = 20 mAVDMO10A1 d-605-nmPeak emmision wavelengthIF = 20 mA p-611-nmSpectral line half-widthIF = 20 mA -17-Forward voltage per segmentIF = 20 current per segment (2)VR = 5 VIR--100 ALuminous intensity matching ratioIF = 10 mAIv-m--2.

5 1 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VDMY10A1, YELLOWPARAMETERTEST intensity (1)IF = 1 mAVDMY10A1IV4501600- cdIF = 10 mAVDMY10A1IV-17 600- cdDominant wavelengthIF = 20 mAVDMY10A1 d-587-nmPeak emmision wavelengthIF = 20 mA p-588-nmSpectral line half-widthIF = 20 mA -15-Forward voltage per segmentIF = 20 current per segment (2)VR = 5 VIR--100 ALuminous intensity matching ratioIF = 10 mAIv-m--2:1 VDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev. , 29-Nov-133 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

6 (2)Reverse voltage is only for IR can not continue to operate at this situation.(3)Cross talk specification %.Note The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped in one tube (there will be no mixing of two groups in one tube). In order to ensure availability, single brightness groups will not be Wavelengths are tested at a current pulse duration of 25 ms. OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VDMG10A1, GREENPARAMETERTEST intensity (1)IF = 1 mAVDMG10A1IV110500- cdIF = 10 mAVDMG10A1IV-5500- cdDominant wavelengthIF = 20 mAVDMG10A1 d-572-nmPeak emmision wavelengthIF = 20 mA p-571-nmSpectral line half-widthIF = 20 mA -15-Forward voltage per segmentIF = 20 current per segment (2)VR = 5 VIR--100 ALuminous intensity matching ratioIF = 10 mAIv-m--2:1 LUMINOUS INTENSITY CLASSIFICATIONGROUPLIGHT INTENSITY ( cd) 000P11 00022 000Q18 00036 000R28 00056 000S45 00090 000 COLOR CLASSIFICATIONGROUPSOFT ----5705738 ----572575 VDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev.

7 , 29-Nov-134 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) Fig. 1 - Forward Current vs. Ambient Temperature Fig. 2 - Relative Intensity vs. Wavelength Fig. 3 - Relative Luminous Intensity vs. Forward Current Fig. 4 - Forward Current vs. Forward Voltage Fig. 5 - Peak Current vs. Duty CycleTamb - Ambient Temperature ( C)010202530020406080100120IF - Forward Current (mA)515560600640 660680 - Wavelength (nm) - Relative soft orange super red green yellow620540520580IF- Forward Current (mA) Relative Luminous Intensityvrel10051520(normalized to 1 at 10 mA) Forward Voltage (V)I - Forward Current (mA) Cycle % (Frequency 1 kHz)Ipeak - Peak Current (mA)VDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev.

8 , 29-Nov-135 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT DIMENSIONS in millimeters specificationsaccording to DINtechnical drawingsDrawing-No.: : 2; F GDP3, 8 Common CCathode DPCathode BCathode ACommon AnodeCathode FCathode GCathode DCathode are mm unless otherwise mentionedPlastic pins burr max. mmVDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev. , 29-Nov-136 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT AND REEL DIMENSIONS in millimetersTAPE IN BOXVDMR10A1, VDMO10A1, VDMY10A1, Semiconductors Rev.

9 , 29-Nov-137 Document Number: 84197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT CODE PRODUCT LABEL (example only)A) 2D barcodeB) vishay part numberC) Quantity D) PTC = selection code (binning)E) Code of manufacturing plantF) Batch = date code: year/week/plant codeG) Region codeH) SL = sales locationI) Terminations finishingK) Lead (Pb)-free symbolL) Halogen-free symbolM) RoHS symbolSOLDERING PROFILE Fig. 6 - vishay Lead (Pb)-free Reflow Soldering Profile(acc. to J-STD-020C)RECOMMENDED SOLDER PADMSL LABELSOLDERING IRON (one time only)Temperature300 C time3 s (s)Temperature ( C)255240 C245 Cmax.

10 260 Cmax. 120 smax. 100 s217 Cmax. 30 smax. Ramp Up 3 C/smax. Ramp Down 6 C/s255 C19470-5IR Reflow Soldering Profile for lead (Pb)-free SolderingPreconditioning acc. to JEDEC Level 3max. 2 cycles allowed x = Disclaimer Revision: 08-Feb-171 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product.