Surface Mount Multilayer Ceramic Chip Capacitors …

1 VJ HVArc Guard Vitramon Revision: 25-May-20181 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Mount Multilayer Ceramic chip CapacitorsProhibit Surface Arc-Over in High-Voltage ApplicationsFEATURESFor this Worldwide Patented Technology Specialty: high-voltage applications MLCC that protects against Surface arc-over Excellent high-voltage performance Higher capacitances and smaller case sizes that save board space, as compared to standard high-voltage MLCCs Voltage breakdowns as much as twice that of competitors products Available with polymer termination for increase resistance to board flex cracking. Please contact factory for availability Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see Power supplies DC/DC converters (buck and boost) Voltage multipliers for flyback converters For lighting and other AC applications please contact: SPECIFICATIONSA vailableC0G (NP0) GENERAL SPECIFICATIONNote Electrical characteristics at +25 C unless otherwise specifiedOperating Temperature: -55 C to +125 C Capacitance Range: 10 pF to nFVoltage Range: 1000 VDC to 2500 VDCT emperature Coefficient of Capacitance (TCC): 0 ppm/ C 30 ppm/ C from -55 C to +125 CDissipation Factor (DF): % maximum at VRMS and 1 MHz for values 1000 pF % maximum at VRMS and 1 kHz for values > 1000 pFInsulating Resistance: at +25 C 100 000 M min.

2 Or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is lessAging Rate: 0 % maximum per decadeDielectric Strength Test: performed per method 103 of EIA test voltages 1000 VDC-rated: 150 % of rated voltage 1500 VDC, 2500 VDC-rated: 120 % of rated voltage X7R GENERAL SPECIFICATIONNote Electrical characteristics at +25 C unless otherwise specifiedOperating Temperature: -55 C to +125 C Capacitance Range: 220 pF to 270 nFVoltage Range: 250 VDC to 1000 VDCT emperature Coefficient of Capacitance (TCC): 15 % from -55 C to +125 C, with 0 VDC appliedDissipation Factor (DF): % maximum at VRMS and 1 kHzInsulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is lessAging Rate: 1 % maximum per decadeDielectric Strength Test: performed per method 103 of EIA test voltages 250 VDC-rated:200 % of rated voltage 500 VDC-rated:min.

3 150 % of rated voltage 630 VDC, 1000 VDC-rated: min. 120 % of rated voltage VJ HVArc Guard Vitramon Revision: 25-May-20182 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Detail ratings see Selection Chart Notes(1)DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: code has to be added(3)Termination code E is for conductive epoxy assembly, contact for availability(4)Please contact factory for polymer termination availability(5)Other termination options contact for availabilityQUICK REFERENCE DATADIELECTRICCASEMAXIMUM VOLTAGE (V)CAPACITANCEMINIMUMMAXIMUMC0G (NP0)0805150010 pF390 pF1206150010 nF1210150010 nF22201500470 nF22252500470 nFX7R08051000470 nF12061000220 pF47 nF12101000220 pF82 nF18081000220 pF100 nF18121000220 pF270 nFORDERING INFORMATION (4)VJ0805A101 JXGAT5Z (2)CASECODEDIELECTRIC CAPACITANCENOMINALCODECAPACITANCETOLERAN CETERMINATION(5)DCVOLTAGERATING (1)MARKINGPACKAGINGPROCESSCODE0805120612 101808181222202225 A = C0G(NP0)Y = X7 RExpressed inpicofarads (pF).

4 The first twodigits aresignificant, thethird is = 1000 pF223 = 22 000 pFJ = 5 % K = 10 %M = 20 %X = Ni barrier 100 % matte tin plate finishF, E = AgPd (3)B = polymer100 % matte tin plate finish (4)P = 250 VE = 500 VL = 630 VG = 1000 VR = 1500 VO = 2500 VA =unmarked5Z = HVArcGuard T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tapeENVIRONMENTAL STATUSTERMINATION CODETERMINATION DESCRIPTIONRoHS COMPLIANTVISHAY GREENXNi barrier 100 % tin plated matte finishYesYesEAgPdYesYesBPolymer layer, 100 % tin plated matte finishYesNoFAgPdYesNoVJ HVArc Guard Vitramon Revision: 25-May-20183 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Polymer (B-termination) have increased dimensions: part length increased by " ( mm)DIMENSIONS in inches (millimeters) CASECODESTYLELENGTH(L)WIDTH(W)MAXIMUMTHI CKNESS(T) TERMINATION PAD (P)MINIMUM ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) HVArc Guard Vitramon Revision: 25-May-20184 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)See soldering recommendations within this data book, or visit Available in plastic carrier tape onlyRoHS-compliantSELECTION CHART C0G (NP0) DIELECTRICC0G (NP0)STYLEVJ0805VJ1206 (1)VJ1210 (1)VJ2220 (1)VJ2225 (1)CASE CODE 08051206121022202225 VOLTAGE (VDC)10001500100015001000150010001500100 015002500 VOLTAGE CODEGRGRGRGRGROCAP. pF 12012 pF 15015 pF 18018 pF 22022 pF 27027 pF 33033 pF 39039 pF 47047 pF 56056 pF 68068 pF 82082 pF 101100 pF 121120 pF 151150 pF 181180 pF 221220 pF 271270 pF 331330 pF 391390 pF 471470 pF 561560 pF 681680 pF 821820 pF nF nF nF nF nF nF nF nF nF nF nF nF VJ HVArc Guard Vitramon Revision: 25-May-20185 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

6 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)See soldering recommendations within this data book, or visit Available in plastic carrier tape onlyRoHS-compliantSELECTION CHART X7 RDIELECTRICX7 RSTYLEVJ0805VJ1206 (1)VJ1210 (1)VJ1808 (1)VJ1812 (1)CASE CODE08051206121018081812 VOLTAGE (VDC)630 1000 250500630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000 VOLTAGE CODELGPELGPELGPELGPELGCAP. pF 121120 pF 151150 pF 181180 pF 221220 pF 271270 pF 331330 pF 391390 pF 471470 pF 561560 pF 681680 pF 821820 pF nF nF nF nF nF nF nF nF nF nF nF nF 10310 nF

7 12312 nF 15315 nF 18318 nF 22322 nF 27327 nF 33333 nF 39339 nF 47347 nF 56356 nF 68368 nF 82382 nF 104100 nF 124120 nF 154150 nF 184180 nF 224220 nF 274270 nF 334330 nF VJ HVArc Guard Vitramon Revision: 25-May-20186 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Guard C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS-75 -50-250255075100 C% CAPACITANCE CHANGETEMPERATURE COEFFICIENT OF CAPACITANCETEMPERATURE C 1025100 12510 000100010010 INSULATION RESISTANCE( F)MINIMUM INSULATION RESISTANCE VS.

8 TEMPERATUREAGING RATEHOURS101100100010 CAPACITANCE VOLTS APPLIEDVOLTAGE COEFFICIENT OF CAPACITANCE% CAPACITANCE CHANGE0 10 20 30 40 50 60 70 80 90 (MHz)IMPEDANCE ( )IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard 470 pF1000 pFVJ HVArc Guard Vitramon Revision: 25-May-20187 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Guard X7R DIELECTRIC - TYPICAL PARAMETERS-20-15-10-5051015-100-50050100 150 TEMPERATURE COEFFICIENT OF CAPACITANCE% CAPACITANCE CHANGETEMPERATURE C TEMPERATURE C1025100 12510 000100010010 INSULATION RESISTANCE ( F)MINIMUM INSULATION RESISTANCE VS. TEMPERATUREAGING CAPACITANCE FACTOR VS. TEMPERATURE% DISSIPATION FACTORTEMPERATURE C IMPEDANCE VS.

9 FREQUENCY OF 1206 HVArc Guard (MHz)IMPEDANCE ( )100033 nF22 nF15 nFVJ HVArc Guard Vitramon Revision: 25-May-20188 Document Number: 45197 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1) vishay Vitramon uses embossed plastic carrier tape(2)11 1/4" reel is standard for large quantities. 13" is maybe used for large T dimension parts(3)Reference: EIA standard RS 481 - Taping of Surface Mount Components for Automatic Placement (4)Packaging quantity can vary with product thickness Contact with respect to specific part number requirementsTYPICAL C0G (NP0) VOLTAGE BREAKDOWNTYPICAL X7R VOLTAGE BREAKDOWNTYPICALARCING ON MLCCS (shown in polarized light)Crack caused by Surface arc from end termination to top electrode layer cause component failureCorona traces due to arc-over become conductive paths leading to component failureAPPLICATION NOTE Suitable only for transient voltage and not for periodical pulse(s) chain 1000 V rated parts are not suitable for AC / lighting applications above 220 VAC 500 V and 630 V are not suitable for AC / lighting applications above 110 VAC If further questions, please contact.

10 PACKAGING QUANTITIES (1)(2)(3)CASE CODETAPE SIZE7" REEL QUANTITIES11 1/4" AND 13" REEL QUANTITIESPLASTIC TAPE PACKAGING CODE T PLASTIC TAPE PACKAGING CODE R 08058 mm300010 0001206 (4)8 mm2500 / 300010 0001210 (4)8 mm2500 / 300010 000180812 mm200010 000181212 mm10004000222012 mm1000n/a222512 mm500n/aSTORAGE AND HANDLING CONDITIONS(1) Store the components at 5 C to 40 C ambient temperature and 70 % relative humidity conditions.(2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is :a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor Store products on the shelf and avoid exposure to moisture or Do not expose products to excessive shock, vibration, direct sunlight and so C0G (NP0) VOLTAGE BREAKDOWN(n = 50, 500 V/s applied) 2000210022002300240025002600270028002900 30001000 V1500 VPART RATED VOLTAGEAVERAGE VOLTAGEBREAKDOWN (VDC)TYPICAL X7R VOLTAGE BREAKDOWN (n = 50, 500 V/s applied) 0 500100015002000250030003500250 VDC500 VDC1000 VDCPART RATED VOLTAGEAVERAGE VOLTAGEBREAKDOWN (VDC)HVArc Guard HVArc Guard CompetitorLegal Disclaimer Revision: 01-Jan-20191 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.