Surface Mount Multilayer Ceramic Chip Capacitors …

1 dscc Vitramon Revision: 11-Jan-171 Document Number: 45043 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Mount Multilayer Ceramic chip CapacitorsDSCC Qualified Type 03028 FEATURES US defense supply center approved Federal stock control number, CAGE CODE 2770A Small case size (0603) Stable BP, BR and BX dielectrics Excellent aging characteristics Lead (Pb)-free termination code M Tin / lead termination code Z and U Wet build process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials and tight process control to achieve very high field reliability Material categorization: for definitions of compliance please see *This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant.

2 For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for detailsAPPLICATIONS Broadband wireless communication Satellite communication WiFi ( ) and WiMax ( ) Subscriber based wireless devices Microwave systemsELECTRICAL SPECIFICATIONSNote Electrical characteristics at +25 C unless otherwise specifiedOperating Temperature: -55 C to +125 CCapacitance Range:BP: pF to nFBR: 100 pF to 100 nFBX: 100 pF to 100 nFVoltage Range: VDC to 100 VDCT emperature Coefficient of Capacitance (TCC):BP: 0 ppm/ C 30 ppm/ C from -55 C to +125 C with zero (0) VDC appliedBP: 0 ppm/ C 30 ppm/ C from -55 C to +125 C with 100 % rated VDC appliedBR: 15 % from -55 C to +125 C with zero (0) VDC appliedBR: +15 %, -40 % from -55 C to +125 C with 100 % rated VDC appliedBX.

3 15 % from -55 C to +125 C with zero (0) VDC appliedBX: +15 %, -25 % from -55 C to +125 C with 100 % rated VDC appliedDissipation Factor (DF):BP: % max. at VRMS and 1 MHz for values 1000 pF % max. at VRMS and 1 kHz for values > 1000 pF BR, BX: 25 V: % max. at VRMS and 1 kHz 50 V: % max. at VRMS and 1 kHzAging Rate:BP: 0 % maximum per decadeBR, BX: 1 % maximum per decadeInsulation Resistance (IR):at +25 C and rated voltage 100 000 M minimum or 1000 F, whichever is lessat +125 C and rated voltage 10 000 M minimum or 100 F, whichever is lessDielectric Strength Test:performed per method 103 of test voltages 200 VDC-rated: 250 % of rated voltageAvailableAvailableDSCC Vitramon Revision: 11-Jan-172 Document Number: 45043 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

4 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Detail ratings see Selection Chart Notes(1)DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: receive data package, add P to the end of the part number. For example, 03028 -BX102 BJZCTP. Group C will be completed and data included with Metric equivalents are given for general information onlyQUICK REFERENCE DATADIELECTRICCASEMAXIMUM VOLTAGE(V) nFBR0603100100 pF100 nFBX0603100100 pF100 nFORDERING INFORMATION03028- BX 102 BJZ-TDSCCNUMBERDIELECTRICCAPACITANCENOMI NAL CODEDC VOLTAGERATING (1)CAPACITANCETOLERANCETERMINATIONGROUP CTESTING OPTION (2)PACKAGINGCase code0603 BPBRBXE xpressed inpicofarads (pF).The first twodigits aresignificant, thethird is amultiplier.

5 An R indicates adecimal :1R8 = pF101 = 100 pFW = VX = 10 VY = 16 VZ = 25 VA = 50 VB = 100 VC = pF D = pF F = 1 % G = 2 % J = 5 % K = 10 %M = 20 %Note:C, D < 10 pF (BP)F, G, J, K, M 10 pF (BP) J, K, M (BR, BX)M = silverpalladiumZ = Ni barrierwith tin / leadplate min. 4 % leadU = Ni barrier, solder coated(min. of 4 % lead)C = full group CL = 2000 h lifetest onlyM = 1000 h lifetest onlyH = low voltagehumidity test only- = no group CtestingT = 7" reel / plastic tapeC = 7" reel / paper tapeO = 7" reel / flamed paper tapeJ = 7" reel (low quantity)R = 11 1/4" / 13" reel / plastic tapeP = 11 1/4" / 13" reel / paper tapeI = 11 1/4" / 13" reel /flamed paper tapeB = bulkNote: I and O are used for M termination codeDIMENSIONS in inches (millimeters)PART ORDERING NUMBERLENGTH(L)WIDTH(W)MAXIMUM THICKNESS (T)TERMINATION PAD(P) ( ) ( ) ( ) ( ) ( ) Vitramon Revision: 11-Jan-173 Document Number: 45043 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

6 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT CHARTDIELECTRICBP BR BX STYLE03028 CASE CODE0603 VOLTAGE (VDC) 50 100 CODEWXYZ AB WXYZ AB WXYZ AB CAP. pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF 10010 pF 11011 pF 12012 pF 13013 pF 15015 pF 16016 pF 18018 pF 20020 pF 22022 pF 24024 pF 27027 pF 30030 pF 33033 pF 36036 pF 39039 pF 43043 pF 47047 pF 51051 pF 56056 pF 62062 pF 68068 pF 75075 pF 82082 pF 91091 pF NotesRoHS-compliant except when supplied with lead (Pb)-containing termination, code Z Not RoHS-compliantDSCC Vitramon Revision: 11-Jan-174 Document Number: 45043 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT pF 121120 pF 151150 pF 181180 pF 221220 pF 271270 pF 331330 pF 391390 pF 471470 pF 561560 pF 681680 pF 821820 pF nF nF nF nF nF nF nF nF nF nF nF nF 10310 nF 12312 nF 15315 nF 18318 nF 22322 nF 27327 nF 33333 nF 39339 nF 47347 nF 56356 nF 68368 nF 82382 nF 104100 nF 124120 nF154150 nF184180 nF224220 nFSELECTION CHARTDIELECTRICBP BR

8 BX STYLE03028 CASE CODE0603 VOLTAGE (VDC) 50 100 CODEWXYZ AB WXYZ AB WXYZ AB CAP. except when supplied with lead (Pb)-containing termination, code Z Not RoHS-compliantDSCC Vitramon Revision: 11-Jan-175 Document Number: 45043 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Reference: EIA standard RS 481 - Taping of Surface Mount Components for Automatic Placement dscc PACKAGING QUANTITIES (1)CASE CODETAPE SIZE7" REEL QUANTITIES11 1/4" AND 13" REEL QUANTITIESBULK PACKAGING CODEPACKAGING CODEVIAL PACKAGING CODE C / O / T J P / I / R B 06038 mm4000100010 000100 STORAGE AND HANDLING CONDITIONS(1) Store the components at 5 C to +40 C ambient temperature and 70 % relative humidity conditions.

9 (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is :a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor Store products on the shelf and avoid exposure to moisture or Do not expose products to excessive shock, vibration, direct sunlight and so Disclaimer Revision: 01-Jan-20191 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product.

10 To the maximum extent permitted by applicable law, vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on vishay s knowledge of typical requirements that are often placed on vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.