Transcription of Synology DiskStation MIB Guide
1 1 Synology DiskStationMIB GuideTable of ContentsIntroduction 01 Supported MIB files 03 Synology MIB files 05 Synology System MIBS ynology Disk MIBS ynology RAID MIBS ynology UPS MIBS ynology Smart MIBS ynology Services MIBS ynology StorageIO MIBS ynology SpaceIO MIBS ynology FlashCache MIBS ynology iSCSI LUN MIBS ynology Ebox MIBS ynology SHA MIBS ynology NFS MIBS ynology GPUInfo MIBS ynology Port MIBS ynology iSCSI Target MIBU seful OIDs 20 Monitor Specific OIDs 23 Import MIB FilesSet up the NMSD ocument Revision History 27 Copyright and Disclaimer Notices 28 THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION WHICH IS THE PROPERTY OF Synology INCORPORATED AND SHALL NOT BE REPRODUCED, COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF Synology INCORPORATED01 IntroductionSynology DiskStation Manager (DSM) allows users to monitor the status of their Synology servers through Network Management Systems (NMS)
2 Via Simple Network Management Protocol (SNMP). However, Synology DSM does not provide SNMP trap document introduces Management Information Base (MIB) files of Synology servers. It focuses on which MIB files are supported by DSM, while also describes how Object Identifiers (OIDs) in Synology MIBs are used with your preferred NMS software. Users are encouraged to have experience and knowledge of NMS and SNMP before consulting this MIB filesDSM and SRM supports numerous MIB files that can help users monitor different information on their Synology NAS/IP SAN (hereinafter referred to as Synology servers).
3 Table 2-1 shows the MIBs supported by DSM and MIB files can be separated into two types: general SNMP MIB and Synology MIB. General SNMP MIB files are equipped on NMS clients MIB files can provide specific data about a Synology server system, disks, RAID, and connected UPS devices. Please see the Synology MIB Files section below for more Synology MIB can download the Synology MIB file : For all tables in this document, unless otherwise noted, DSM denotes that this OID is compatible with DSM and above.
4 And DSM UC denotes that this OID is compatible with DSM UC 2-1 General MIB Files Supported by DSMMIBE xplanationDISMAN-EVENT-MIB For defining event triggers and actions for network management purposesDISMAN-SCHEDULE-MIBFor scheduling SNMP set operations periodically or at specific points in timeHOST-RESOURCES-MIBFor use in managing host systemsIF-MIBFor describing network interface sub-layersIP-FORWARD-MIBFor the management of CIDR multipath IP RoutesIP-MIBFor IP and ICMP management objectsIPV6-ICMP-MIBFor entities implementing the ICMPv6 IPV6-MIBFor entities implementing the IPv6 protocolIPV6-TCP-MIBFor entities implementing TCP over IPv6 IPV6-UDP-MIBFor entities implementing UDP over IPv6 NET-SNMP-AGENT-MIBFor monitoring structures for the Net-SNMP agentNET-SNMP-EXTEND-MIBFor scripted extensions for the Net-SNMP agentNET-SNMP-VACM-MIBD efines Net-SNMP extensions to the standard VACM view tableNOTIFICATION-LOG-MIBFor logging SNMP NotificationsSNMP-COMMUNITY-MIBTo help support
5 Coexistence between SNMPv1, SNMPv2c, and SNMPv3 SNMP-FRAMEWORK-MIBThe SNMP Management Architecture MIBSNMP-MPD-MIBFor Message Processing and DispatchingSNMP- user -BASED-SM-MIBFor the SNMP user -based Security ModelSNMP-VIEW-BASED-ACM-MIBFor the View-based Access Control Model for SNMPSNMPv2-MIBFor SNMP entitiesSYNOLOGY-DISK-MIBFor Synology disk information ( Synology only) Synology -EBOX-MIBFor Synology ebox information ( Synology only)Supported MIB files04 Supported MIB filesSYNOLOGY-FLASHCACHE-MIBFor Synology FlashCache information ( Synology only) Synology -GPUINFO-MIBFor Synology GpuIO information ( Synology only) Synology -ISCSILUN-MIBFor Synology iSCSI LUN information ( Synology only) Synology -ISCSIT arget-MIBFor Synology iSCSI Target information ( Synology only) Synology -NFS-MIBFor Synology NFS information ( Synology only) Synology Ethernet Port information ( Synology only) Synology -RAID-MIBFor Synology RAID information ( Synology only)
6 Synology -SERVICES-MIBFor Synology services information ( Synology only) Synology -SHA-MIBFor Synology High-Availability information ( Synology only) Synology -SMART-MIBFor Synology smart information ( Synology only) Synology -SPACEIO-MIBFor Synology SpaceIO information ( Synology only) Synology -STORAGEIO-MIBFor Synology StorageIO information ( Synology only) Synology -SYSTEM-MIBFor Synology system information ( Synology only) Synology -UPS-MIBFor Synology UPS information ( Synology only)TCP-MIBFor managing TCP implementationsUCD-DISKIO-MIBFor disk IO statisticsUCD-DLMOD-MIBFor dynamic loadable MIB modulesUCD-SNMP-MIBFor private UCD SNMP MIB extensionsUDP-MIBFor managing UDP implementations05 Synology MIB filesThe following Synology MIB files are provided in DSM.
7 These MIB files are the child-nodes of OID (Object Identifier) Table 3-1 shows the exact OID of each MIB. Please note that the MIB files are mutually dependent. Before your NMS can monitor any of the items in these MIB files, please make sure that all of them have been imported together and use SNMPv2c to obtain the complete Synology OID 3-1 OID of Synology MIBsOIDNameFile NameLast updated MIB files06 Synology MIB filesSynology System MIB (OID: . )The Synology System MIB displays all system statuses, including temperature and fan status.
8 Users can monitor this MIB for system functionality. Table 3-2 shows information provided in the System 3-2 System MIBOIDNameTypeStatus TypeExplanationSupported (1)Failed(2)System partition statusDSM, DSM of this NASDSM, DSM (1)Failed(2)Returns error if power supplies failDSM, DSM (1)Failed(2)Returns error if system fan failsDSM, DSM (1)Failed(2)Returns error if CPU fan failsDSM, DSM name of this NASDSM, DSM serial numberDSM, DSM version of DSMDSM, DSM (1)Unavailable(2)Connecting(3)Disconnect ed(4)Others(5)
9 Checks whether a new version or update of DSM is available DSM, DSM A(0)Controller B(1)The controller numberDSM UCSynology Disk MIB (OID: . )The Synology Disk MIB contains several types of information regarding hard drives, including ID, type and so on, as listed in Table 3-3. This MIB is a table in SNMP. As such, it can increase or decrease in size when disks are inserted or removed. For example, if a disk is inserted, an additional row containing relevant information will emerge. The OID DiskIndex (.1) is reserved for an index of table rows and cannot be accessed.
10 Table 3-4 describes the contents of each DiskStatus in order to directly access a specific OID, you must use ". " as a prefix since this MIB contains the relative table and entry number. For example, ". " can be used to get the disk MIB filesTable 3-3 Disk MIBOIDNameTypeStatus TypeExplanationSupported internally for SNMP table and not accessibleDSM, DSM name in DSMDSM, DSM modelDSM, DSM type, SATA, SSDDSM, DSM (1)*Current disk statusDSM, DSM temperatureDSM, DSM *The role of the disk in systemDSM and count of each disk connection retriesDSM and count of each disk I/O bad sectorDSM and count of each disk identify failsDSM and estimate remain life of each diskDSM and name which will keep the same value in different DSM versionDSM and (1)
