System 5600 2 1 2 Curtain Wall Thermally Improved System

1 Thermal Isolator used between exterior and interior extrusionsImproved thermal performanceVarious mullion depthsProvides design flexibilityWide variety of snap-on face coversCustomize projects with face covers of various depths and profilesOptional corner mullionsAllows 90 inside and outside cornersConcealed shear block constructionAbility to erect on the job siteConcealed ventsAbility to include ventilation while maintaining the exterior sight lineIntegral door adaptorsCompatible with all 1 3 4" and 2" EFCO entrancesAccommodates up to 1 5 16" glazingExpands design and energy saving optionsAccessory line of perimeter anchors, pocket fillers, door adaptors, product versatilityAnodized and painted finishes availableMultiple options to answer economic and aesthetic concernsRoll-On HorizontalsConcealed fasteners, reduced installation laborFeatures BenefitsSystem 56002 1 2 Curtain Wall Thermally Improved System Copyright 2015 EFCO Corporation 02/201000 COUNTY RD MONETT, MO 65708 Outside Glazed 2 or 4-sided Structural GlazedEFCO 2 1/2 System 5600 provides a monumental sight line and is available in a wide range of mullion and face cover depths.

2 The 2 1/2 5600 pressure wall has roll-on horizontals and concealed fasteners for a smooth uninterrupted joinery. Also Available for enhanced thermal performance and fewer installation steps is a fiberglass pressure 5600 OUTSIDE GLAZED Curtain WALLAIR INFILTRATION ..<.06 CFM/SF @ PSFWATER ..NO LEAKAGE > PSFSTRUCTURAL ..visit MyEFCO at - FRAME (1503-09) ..66*EFCO CERTIFIES SERIES 5600 2, 2 1/4, 2 1/2, 3, 4, 5, AND 6" WIDE SYSTEMS MEET THE ABOVE AIR (ASTM E 283) AND WATER (ASTM E 331) PERFORMANCE. CONTACT EFCO FOR MORE COVERS*-Obscure glass thickness**-Laminated glass thicknessA -Available Glazing OptionC -Custom pressure plate, adaptor and/or gasket requiredBlank - N/AINTEGRAL S-5600 GLAZING CHARTPOLYCARBONATEGLASS OR PANEL1/8"3/16"1/4"1/8".156"*3/16".200"*1 /4"1/4"**1/2"5/8"3/4"7/8"1"1-1/8"1-1/4"O UTSIDEGLAZEDMONOLITHIC GLASSCCACCCCAAACCCINSULATED GLASSACASTRUCTURALGLAZEDMONOLITHIC GLASSAAAAINSULATED GLASSAAA -Available System DepthBlank - N/AAVAILABLE SYSTEMDEPTHSSYSTEM DEPTH2-1/2 3 3-7/8 4-1/2 67-1/4 7-1/2 8 9 10-1/4 OUTSIDE GLAZEDAAAAAAAAAA2- AND 4-SIDED STRUCTURAL GLAZEDAAAAAANote: All performance value data is based on laboratory testing per AAMA 101 for Air/Water/Structural, ASTM E90 and or E413 for Acoustical, AAMA 507 and or NFRC 100/200/500 for UFactors and AAMA 1503 for Condensation Resistance Factor (CRF).

3 Printed values are subject to change pending the frequency of recertification testing. Field results will vary depending on size, the field test method, the addition of sub-frames, panning, mullions, accessories and installation into the surrounding condition. PERFORMANCE DATA System 56002 1 2 Curtain Wall Thermally Improved System1000 COUNTY RD MONETT, MO 65708 Copyright 2015 EFCO Corporation 02/205600 THERMAL U-FACTORS*CENTER OF GLASS U-FACTORCONFIGURATION AND SIZEFX/FX78 3/4 X 78 3/4 . * - Performance based on center of glass U-Factor. U-Factor performance dependent on glass selection. Please contact your EFCO sales representative for project specific performance. Illustration 2 Main Frame ConstructionSystem 5600 Curtain wall has various System depths. Sight lines are nominally 2 1/2 and present a clean, attractive appearance. Members are extruded from 6063-T6 aluminum alloy, and the nominal material wall thickness is.

4 093 to .125 . Joint construction utilizes the shear block method. See Illustration 1 for exposed fastener. See Illustration 2 for concealed fastener. Concealed Vent ConstructionSystem 5600 Curtain wall has optional concealed vents that utilize screw spline BarrierSystem 5600 Curtain wall members are Thermally Improved using vinyl gasket to isolate exterior and interior InformationSystem 5600 Curtain wall has optional sunshades available in five standard depths. Sunshade blades available in various sizes. Members are extruded from 6063-T6 aluminum alloy. Sunshade clips and arms are fabricated on a CNC machine. Joint construction utilizes screw spline construction. *Note: Structural design loads will determine the sunshade depth and clip spacing 5600 Curtain wall can be glazed from the interior or the exterior. It is dry glazed with preset and drive-in EPDM gasket.

5 Series 5600 accommodates 1/4 to 1 5/16 infill panels. Dual glazing is available with internal 56002 1 2 Curtain Wall Thermally Improved SystemIllustration 11000 COUNTY RD MONETT, MO 65708 Copyright 2015 EFCO Corporation 02/20