T5e Parts Manual (S/N 10000000-20000000) - Tennant Co

i-mop XL Parts Manual (S/N 300000- )

STANDARD PARTS Tennant i-mop XL (03-2019) 11 CONTROL CONSOLE ASSEMBLY Ref. Part No. Serial Number Description Qty. 1 1232438 (300000- ) Control Assy, Unit 1 Y 2 1232684 (300000- ) Knob, Cntrl 1 Y 3 N/A (300000- ) Hexagon Socket Set Screw M4 x 8 1 Y 4 N/A (300000- ) Fixation Insert Turning Button 1 Y 5 1246339 (300000- ) Hardware Kit, Control Hsg …

Operator Parts Manual - Tennant Co

BESTILLING AF RESERVEDELE - Se ovenstående tabel. Brug kun reservedele, der er fremstillet af TENNANT, eller dele af tilsvarende kvalitet. Reservedele og tilbehør kan bestilles online, pr. telefon, pr. fax eller pr. brev.

  Manual, Operator, Tennant, Tennant co

5680 Operator Manual - Tennant Co

Walk--Behind Scrubber Operator Manual 330450 Rev. 08 (09-2006) North America / International The Safe Scrubbing AlternativeR (Electric) (000000--029999) This manual is furnished with each new model. It provides necessary operation and maintenance instructions.

  Manual, Operator, Scrubber, Manual operator, Tennant, Scrubber operator manual, Tennant co

T300 Operator Manual - Tennant Co

businesses. It is designed to scrub hard floor surfaces (concrete, tile, stone, synthetic, etc.) in an indoor environment. This machine is not intended for cleaning carpets or sanding wood floors. Use only recommended pads/brushes and commercially available floor cleaning detergents. Do not use this machine other than described in this Operator ...

  Businesses, Tennant, Tennant co

T5 Operator Manual - Tennant Co

- Use care when reversing machine. - Do not carry passengers on machine. - Keep children and unauthorized persons away from machine. - Do not allow machine to be used as a toy. - Always follow safety and traffic rules. - Report machine damage or faulty operation immediately. - Follow mixing and handling instructions on chemical containers.

  Care, Container, Tennant, Tennant co

T300e Operator Manual - Tennant Co

wet floors. - Follow mixing, handling and disposal instructions on chemical containers. - Do not carry passengers on machine. - Use care when reversing machine. - Keep children and unauthorized persons away from machine. - Do not allow machine to be used as a toy.

  Tennant, Tennant co

T5 Parts Manual - Tennant Co

1218753 (10771597-10819238 ) Wheel, Scrbr, 213mm, W/ Taper (Replaced by 9004909) 2 1020688 (00000000-10771596 ) Wheel, Scrbr, 213.00mm With Taper (Replaced by 9004909)

  Wheel, Tennant, Tennant co

9015506 T500e English Operator Manual NA - Tennant Co

DC cord from the machine's receptacle when the charger is operating. Arcing may result. If the charger must be interrupted during charging cycle, disconnect the AC power supply cord first. - Do not use incompatible battery chargers as this may damage battery packs and potentially cause a fire hazard. - Inspect charger cord regularly for damage.

  Receptacles, Charger, Tennant, Tennant co

T3 / T3+ Operator Manual - Tennant Co

Open Flame Away. Keep Battery Hood Open When Charging. FOR SAFETY: When servicing machine, wear protective gloves and eye protection when handling batteries and battery cables. Avoid contact with battery acid. Battery Specifications: Two 12 volt,100A/5h, 105A/5h or 110A/5h deep cycle batteries. Maximum battery dimensions: 174 mm W x 380 mm L x ...

  Battery, Charging, Tennant, Tennant co

(Gas / LPG) Rider Scrubber Operator Manual

SAFETY PRECAUTIONS 4 T20 Gas/LPG 331470 (12−2012) 4. When using machine: −Use only as described in this manual. −Use brakes to stop machine. −Go slow on inclines and slippery surfaces. −Reduce speed when turning. −Keep all parts of body inside operator station while machine is moving. −Use care when reversing machine. −Never allow children to play on or

Texture High glossy Texture blend polish.

Texture blend polish. SPI finish. When deign the product , the draft angle of the parts should be considered. ... #3 Diamond Buff #6 Diamond Buff #15 Diamond Buff 600 Grit 400 Grit 320 Grit 600 Stone 400 Stone 320 Stone #11 Glass Bead 240 Aluminum Oxide Blast Aluminum Oxide Blast 83 02 03 .

  Polish, Buff

AN INTRODUCTION TO BUFFING AND POLISHING

buff out this deep scratch with a buffing wheel, because the wheel would remove more material from the hole, as well as the surrounding areas. By keeping the abrasive on a flat block, no further material can be removed from the hole. Surface removed to: As the scratch is lessened, the grit size of paper is reduced from 40, to 80, 120, 240, 320 and

  Introduction, Polishing, Buffing, Buff, Introduction to buffing and polishing

APPLICATION GUIDE

GEL POLISH REMOVAL TGB Gel polish STEP #1: PREP STEP #2: TOP COAT REMOVAL STEP #3: SOAK OFF STEP #4: REMOVAL STEP #5: BUFF AND SHAPE • Sanitize your own and your customer’s hands. • Using the 120/180 grit file, remove the topcoat by filing the entire surface of the leftover gel polish until the shine has gone completely.

  Polish, Buff

menu - sorbetdrybar.co.za

Corn Rows with own hair, Straight back until neck Max 5 lines R170 Max 10 lines R265 Max 15 lines R340 Nails Mani Pedi Quick - file, buff & paint R155 R165 Mini - soak, file, buff & paint R245 R255 Power - soak, file, buff, paint, exfoliation & massage R325 R345 No Paint Power - excludes polish R225 R295 12 years and under R100 R110

  Polish, Buff

Cleaning Contract - Scope of Work Daily Weekly Monthly ...

polish / buff concrete floors with finish provided by management X. Cleaning Contract - Scope of Work General Notes remove all building trash to designated dumpster keep areas surrounding dumpster clean any debris outside trash receptacles will be discarded only if marked as trash

  Polish, Buff

How to Apply - Color Street

• Clean and prep nails before application — buff and file nails, push back cuticles, and use a prep pad to remove any oils or lotions. • Remove the clear film that covers the strips before application. • Apply thumbs last — start with pinky and work toward thumb

  Buff