Transcription of Technical data sheet Template-ATF III-2 - Total
1 Total Box: 52288 Dubai, United Arab Emirates1/1 ATFIIIN TDS/DXB/10/06/341 This lubricant used in accordance with our recommendations and for the application for which it is intended does not represent a special safety data file conforming to the requirements of current legislation is available from your local trade IIIA utomatic Transmission Fluid-Automatic converters and steering systemsATF III IS RECOMMENDED FOR ALL AUTOMATIC TRANSMISSIONS AND HYDRAULICSYSTEMS FOR WHICH A DEXRON III FLUID IS REQUIRED BY III PROVIDES MANY PHYSICO-CHEMICAL PROPERTIES REQUIRED FOR AUTOMATICTRANSMISSIONSOF THE LATESTDESIGN:-Special friction properties giving controlled slip for friction components: gearchanging quality, demands smooth clutching actionwithout excessive slip andfree from chatter.
2 This basic property which depends on the relative static and dynamic frictioncoefficients and the variation of the latter with speed, is obtained by means of special unctuous additives,-Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather,-High antioxidation capacity, thermal stability and detergent properties preserving the overall performance during long periods ofuse and preventing from the formation ofdeposits, gums and varnishes,-High viscosity index,-Will not affect elastomers and non-ferrous metals like copper or alloys,-Excellent wear protection of gears, pumps and thrust bearings,-Excellent anticorrosion and antirust properties,-Low pour IIIC olour-RedSpecific Gravity@ 150 @ 400 Cmm2 @ 1000 Cmm2 Viscosity Index-196 Pour Point0C-42 Flash point0C177minThe typical characteristics mentioned represent mean valuesGM DEXRON IIIH FORD MERCONM eets the requirements ofALLISON C4 PROPERTIESTYPICALCHARACTERISTICSUSESSPEC IFICATIONS
