Mystik® Power Lubricants® ATF, Dexron® III/Mercon®

1 WARNING:Oil injected into the skin from high-pressure leaks in hydraulic systemscan cause severe damage occurs during the first few Medical Attention removal of oil may be cause mild skin irritation and inflammation with prolonged orrepeated may create a slipping HazardFire HazardProtective EquipmentMaterial Safety Data SheetTrade NameSynonymsProduct FamilyMSDS Power Lubricants ATF, dexron III/Mercon Automatic Transmission Fluid;CITGO SAP Product Code No.: 633123002 Mystik Power Lubricants ATF, dexron III/Mercon 1: IDENTIFICATIONP roduct NumberCAS Number633123002 Revision Date05/22/2001 Automatic Transmission FluidReactivityHMIS* = Chronic Health HazardCITGO Petroleum Box 3758 Tulsa, OK 74102010 Hazard RankingsIMPORTANT: Read this MSDS before handling or disposing of this product and pass this information on toemployees, customers and users of this Emergency(United States Only)(800) 424-9300 Emergency OverviewTechnical ContactMedical EmergencyNFPAC olorPhysical petroleum odor(918) 495-5933(918) 495-4700 Minimum RequirementsSee Section 8 for DetailsSECTION 2: COMPOSITIONC omponent Name(s)1) Highly-Refined Petroleum Lubricant Oils64741-76-0;64741-88-4;64741-89-5;647 42-54-7;64742-55-8.

2 64742-65-090 - 1002) Proprietary IngredientsProprietary Mixture0 - 10 CAS Registry (%)Continued on Next PagePage Number: 1 MSDS Date05/22/2001633123002 Mystik Power Lubricants ATF, dexron III/Mercon SECTION 3: HAZARDS IDENTIFICATIONAlso see Emergency Overview and Hazard Ratings on the top of Page 1 of this Health EffectsSummaryContains a petroleum-based mineral oil. Prolonged or repeated skin contact can cause mild irritation andinflammation characterized by drying, cracking, (dermatitis) or oil acne. Repeated or prolonged inhalationof petroleum-based mineral oil mists at concentrations above applicable workplace exposure levels cancause respiratory irritation or other pulmonary and Symptoms of Acute Exposure Inhalation Eye Contact Skin Contact IngestionNo significant adverse health effects are expected to occur upon short-term exposure to this of liquid into the lungs can cause severe lung damage or product can cause transient mild eye irritation with short-term contact with liquid sprays or material can cause mild skin irritation from prolonged or repeated skin contact.

3 Injection under theskin, in muscle, or into the blood stream can cause irritation, inflammation, swelling, fever, and systemiceffects and mild central nervous system depression. Injection of pressurized hydrocarbons can causesevere, permanent tissue damage. Initial symptoms may be minor. Injection of petroleum hydrocarbonsrequires immediate medical OrgansMay cause damage to the following organs: PotentialMajor Route(s) of EntrySkin Aggravatedby ExposurePersonnel with pre-existing skin disorders should avoid repeated or prolonged contact with this swallowed, no significant adverse health effects are anticipated. Ingestion can cause a laxative effect. Ifaspirated into the lungs, liquid can cause severe lung damage or product does not contain any components at concentrations above which are consideredcarcinogenic by OSHA, IARC or Health Hazard ClassificationOSHA Physical Hazard ClassificationIrritantSensitizerCorrosiv eToxicHighly ToxicCarcinogenicCombustibleFlammableCom pressed GasExplosiveOrganic PeroxideWater-reactivePyrophoricOxidizer UnstableOSHA Hazard Classification is indicated by an "X" in the box adjacent to the hazard title.

4 If no "X" is present, the product does not exhibit thehazard as defined in the OSHA Hazard Communication Standard (29 CFR ).Eye ContactSkin ContactInhalationCheck for and remove contact lenses. Flush eyes with cool, clean, low-pressure water whileoccasionally lifting and lowering eyelids. Seek medical attention if excessive tearing, redness, or contaminated shoes and clothing. Wipe off excess material. Wash exposed skin with soapand water. Seek medical attention if tissue appears damaged or if irritation persists. Thoroughly cleancontaminated clothing before reuse. Discard contaminated leather goods. If material is injected underthe skin, into muscle, or into the bloodstream, seek medical attention is not expected at ambient temperatures. This material is not expected to causeinhalation-related disorders under anticipated conditions of use. In case of overexposure, move theperson to fresh 4: FIRST AID MEASURESTake proper precautions to ensure your own health and safety before attempting rescue or providing first aid.

5 For more specificinformation, refer to Exposure Controls and Personal Protection in Section 8 of this on Next PagePage Number: 2 MSDS Date05/22/2001633123002 Mystik Power Lubricants ATF, dexron III/Mercon IngestionNotes to PhysicianDo not induce vomiting unless directed to by a physician. Do not give anything to drink unless directedto by a physician. Never give anything by mouth to a person who is not fully conscious. Seek medicalattention viscosity of the product represented by this MSDS is 100 to 400 SUS at 100 F. Accordingly, uponingestion there is a low to moderate risk of aspiration. Careful gastric lavage may be considered toevacuate large quantities of material. In the event of injection in underlying tissue, immediate treatmentshould include extensive incision, debridement and saline irrigation. Inadequate treatment can result inischemia and gangrene. Early symptoms may be FlammabilityClassificationAutoignition TemperatureHazardousCombustion ProductsFlash Point MethodExtinguishing MediaLower Flammable LimitFire Fighting ProtectiveClothingNot Class-IIIB combustible material.

6 Slightly combustible!Carbon dioxide, carbon monoxide, smoke, fumes, unburned hydrocarbons and trace oxides of sulfurand/or CUP: 171 C (340 F). (Pensky-Martens (ASTM D-93).) OPEN CUP: 199 C (390 F)(Cleveland.).No dry chemical, foam, Carbon Dioxide or water must use full bunker gear including NIOSH-approved positive pressure self-containedbreathing apparatus to protect against potential hazardous combustion or decomposition products andoxygen material can burn but will not readily ignite. This material will release vapors when heated abovethe flash point temperature that can ignite when exposed to a source of ignition. In enclosed spaces,heated vapor can ignite with explosive force. Mists or sprays may burn at temperatures below the PropertiesSECTION 5: FIRE FIGHTING MEASURESU pper Flammable LimitNo 6: ACCIDENTAL RELEASE MEASURESDo not touch damaged containers or spilled material unless wearing appropriate protective hazard; do not walk through spilled material.

7 Stop leak if you can do so without risk. For smallspills, absorb or cover with dry earth, sand, or other inert non-combustible absorbent material and placeinto waste containers for later disposal. Contain large spills to maximize product recovery or entry into waterways or sewers. In urban area, cleanup spill as soon as possible. In naturalenvironments, seek cleanup advice from specialists to minimize physical habitat damage. This materialwill float on water. Absorbent pads and similar materials can be used. Comply with all laws proper precautions to ensure your own health and safety before attempting spill control or clean-up. For more specificinformation, refer to the Emergency Overview on Page 1, Exposure Controls and Personal Protection in Section 8 and DisposalConsiderations in Section 13 of this container closed. Do not store with strong oxidizing agents. Do not store at temperatures above120 F or in direct sunlight for extended periods of time.

8 Consult appropriate federal, state and localauthorities before reusing, reconditioning, reclaiming, recycling or disposing of empty containers or wasteresidues of this water contamination and extreme temperatures to minimize product degradation. Emptycontainers may contain product residues that can ignite with explosive force. Do not pressurize, cut,weld, braze solder, drill, grind or expose containers to flames, sparks, heat or other potential ignitionsources. Consult appropriate federal, state and local authorities before reusing, reconditioning,reclaiming, recycling or disposing of empty containers and/or waste residues of this 7: HANDLING AND STORAGEC ontinued on Next PagePage Number: 3 MSDS Date05/22/2001633123002 Mystik Power Lubricants ATF, dexron III/Mercon Engineering ControlsPersonal ProtectiveEquipmentProvide exhaust ventilation or other engineering controls to keep the airborne concentrations of mistsand/or vapors below the recommended exposure limits (see below).

9 An eye wash station and safetyshower should be located near the Exposure GuidelinesSECTION 8: EXPOSURE CONTROLS AND PERSONAL PROTECTIONS afety glasses equipped with side shields should be adequate protection under most conditions of goggles and/or face shield if splashing or spraying is anticipated. Wear goggles and face shield ifmaterial is heated above 125 F (51 C). Have suitable eye wash water special skin protection other than good personal hygiene practice is recommended underanticipated conditions of use. However, when prolonged or extensive contact is possible, use ofdisposable PCV or nitrile gloves is recommended. Wash hands with plenty of mild soap and waterbefore eating, drinking, smoking, using toilet facilities, or leaving or misting is not expected at ambient temperatures. Therefore, the need for respiratoryprotection is not anticipated under normal use conditions and with adequate ventilation.

10 If elevatedairborne concentrations above applicable workplace exposure levels are anticipated, aNIOSH-approved organic vapor respirator equipped with a dust/mist prefilter should be factors vary depending upon the type of respirator used. Respirators should be used inaccordance with OSHA requirements (29 CFR ).Eye ProtectionRespiratory ProtectionUse good personal hygiene practices. Wash hands and other exposed skin areas with plenty of mildsoap and water before eating, drinking, smoking, use of toilet facilities, or leaving work. DO NOT usegasoline, kerosene, solvents or harsh abrasives as skin cleaners. Since specific exposurestandards/control limits have not been established for this product, the "Oil Mist, Mineral" exposurelimits shown below are suggested as minimum control CommentsUse clean and impervious protective clothing ( , neoprene or Tyvek ) if splashing or sprayingconditions are present. Protective clothing may include long-sleeve outer garment, apron, or lab significant contact occurs, remove oil-contaminated clothing as soon as possible and promptlyshower.