TECHNICAL MANUAL FIELD MAINTENANCE …

1 TM 10-8400-203-23&P TECHNICAL MANUAL FIELD MAINTENANCE MANUAL including REPAIR PARTS AND SPECIAL TOOLS LIST FOR GENERAL REPAIR PROCEDURES FOR INDIVIDUAL EQUIPMENT *TM 10-8400-203-23&P dated 24 May 2010 supersedes TM 10-8400-203-23 dated 7 May 1990, including all changes. DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 24 MAY 2010 TM 10-8400-203-23&P a WARNING SUMMARY This warning summary contains general safety warnings and hazardous materials warnings that must be understood and applied during operation of this equipment.

2 Failure to observe these precautions could result in serious injury or death to personnel. Also included are explanations of safety and hazardous materials icons used within this TECHNICAL MANUAL . FIRST AID FIELD level MAINTENANCE and repair of individual equipment requires the use of equipment and chemicals which may be hazardous if used improperly. Before undertaking any procedures presented in this MANUAL , make sure you are familiar with the potential hazards and appropriate first aid measures. Refer to FM , First Aid. EXPLANATION OF SAFETY WARNING ICONS BIOLOGICAL - abstract symbol bug shows that a material may contain bacteria or viruses that present a danger to life or health.

3 CHEMICAL - drops of liquid on hand shows that the material will cause burns or irritation to human skin or tissue. ELECTRICAL - electrical wire to hand with electricity symbol running through hand shows that shock hazard is present. EXPLOSION - rapidly expanding symbol shows that the material may explode if subjected to high temperatures, sources of ignition or high pressure. EYE PROTECTION - person with goggles shows that the material will injure the eyes. FIRE - flame shows that a material may ignite and cause burns. HOT AREA - hand over object radiating heat shows that part is hot and can burn.

4 MOVING PARTS - hand with fingers caught between rollers shows that the moving parts of the equipment present a danger to life or limb. TM 10-8400-203-23&P b EXPLANATION OF SAFETY WARNING ICONS CONTINUED POISON - skull and crossbones shows that a material is poisonous or is a danger to life. SHARP OBJECT - pointed object in hand shows that a sharp object presents a danger to limb. SLICK FLOOR - wavy line on floor with legs prone shows that slick floor presents a danger for falling. VAPOR - human figure in a cloud shows that material vapors present a danger to life or health.

5 GENERAL SAFETY WARNINGS DESCRIPTION WARNING Solvents, cleaners, and adhesives are toxic, and may be flammable and explosive. Wear protective goggles and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and don t breathe vapors. Do not use near open flame or excessive heat. If you become dizzy, get fresh air immediately and get medical aid. If contact with eyes or skin is made, immediately flush with clean water and get medical aid for eyes immediately. TM 10-8400-203-23&P A/B blank LIST OF EFFECTIVE PAGES/WORK PACKAGES NOTE: This MANUAL supersedes TM 10-8400-203-23 dated 7 May 1990, including all changes.

6 Zero in the Change No. column indicates an original page or work package. Date of issue for the original MANUAL is: Original 24 MAY 2010 TOTAL NUMBER OF PAGES FOR FRONT AND REAR MATTER IS 26 AND TOTAL NUMBER OF WORK PACKAGES IS 46, CONSISTING OF THE FOLLOWING: Page / WP No. Change No. Front Cover 0 Blank 0 Warning Summary (2 pgs) 0 i-viii (8 pgs) 0 Chp 1 title page (2 pgs) 0 WP 0001 (2 pgs) 0 WP 0002 (30 pgs) 0 WP 0003 (2 pgs) 0 Chp 2 title page (2 pgs) 0 WP 0004 (2 pgs) 0 WP 0005 (8 pgs) 0 Chp 3 title page (2 pgs) 0 WP 0006 (2 pgs) 0 WP 0007 (14 pgs) 0 WP 0008 (6 pgs) 0 WP 0009 (4 pgs) 0 WP 0010 (6 pgs) 0 WP 0011 (10 pgs) 0 WP 0012 (2 pgs) 0 WP 0013 (2 pgs) 0 WP 0014 (6 pgs) 0 WP 0015 (6 pgs) 0 WP 0016 (2 pgs) 0 WP 0017 (4 pgs) 0 WP 0018 (4 pgs) 0 WP 0019 (8 pgs)

7 0 WP 0020 (4 pgs) 0 WP 0021 (6 pgs) 0 WP 0022 (6 pgs) 0 Chp 4 title page (2 pgs) 0 WP 0023 (6 pgs) 0 WP 0024 (6 pgs) 0 WP 0025 (4 pgs) 0 WP 0026 (6 pgs) 0 WP 0027 (8 pgs) 0 WP 0028 (4 pgs) 0 WP 0029 (6 pgs) 0 WP 0030 (4 pgs) 0 WP 0031 (4 pgs) 0 WP 0032 (6 pgs) 0 WP 0033 (10 pgs) 0 WP 0034 (4 pgs) 0 WP 0035 (4 pgs) 0 WP 0036 (4 pgs) 0 Page / WP No. Change No. WP 0037 (6 pgs) 0 WP 0038 (2 pgs) 0 WP 0039 (4 pgs) 0 WP 0040 (4 pgs) 0 WP 0041 (6 pgs) 0 Chp 5 title page (2 pgs) 0 WP 0042 (2 pgs) 0 WP 0043 (4 pgs) 0 WP 0044 (4 pgs) 0 WP 0045 (4 pgs) 0 WP 0046 (4 pgs) 0 TM 10-8400-203-23&P i HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, , 24 MAY 2010 TECHNICAL MANUAL FIELD MAINTENANCE MANUAL including REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) FOR GENERAL REPAIR PROCEDURES FOR INDIVIDUAL EQUIPMENT REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this publication.

8 If you find any errors, or if you would like to recommend any improvements to the procedures in this publication, please let us know. The preferred method is to submit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through the Internet, on the Army Electronic Product Support (AEPS) website. The Internet address is The DA Form 2028 is located under the Public Applications section in the AEPS Public Home Page. Fill out the form and click on SUBMIT. Using this form on the AEPS will enable us to respond quicker to your comments and better manage the DA Form 2028 program. You may also mail, e-mail, or fax your comments or DA Form 2028 directly to the Army TACOM Life Cycle Management Command.

9 The postal mail address is Army TACOM Life Cycle Management Command, ATTN: AMSTA-LCL-MPP / TECH PUBS, 1 Rock Island Arsenal, Rock Island, IL 61299-7630. The e-mail address is The fax number is DSN 793-0726 or Commercial (309) 782-0726. A replay will be furnished to you. *TM 10-8400-203-23&P dated 24 May 2010 supersedes TM 10-8400-203-23 dated 7 May 1990, including all changes. DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. TM 10-8400-203-23&P ii TABLE OF CONTENTS WP Sequence No. Page No. How to Use This MANUAL vii Chapter 1 General Information, Equipment Description, and Theory of Operation General Information.

10 WP 0001 Table 1. List of Abbreviations and Acronyms .. 0001-2 Equipment Description and Data .. WP 0002 Figure 1. CVC Helmet .. 0002-2 Figure 2. Duffel Bag .. 0002-3 Figure 3. Barracks Bag .. 0002-3 Figure 4. Military Skis .. 0002-4 Figure 5. Ski Binding .. 0002-4 Figure 6. Ski Pole .. 0002-5 Figure 7. Magnesium Trail Snowshoes.