TECHNICAL MANUAL OPERATOR'S, UNIT AND …

1 TM 10-6685-365-13&PTECHNICAL MANUALOPERATOR'S, UNIT ANDDIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)FORFOXBORO RECORDING GAUGEThis TECHNICAL MANUAL is an authentication of the manufacturer's commercial literature anddoes not conform with the format and the content requirements normally associated withArmy TECHNICAL manuals This TECHNICAL MANUAL does, however, contain all essentialinformation required to operate and maintain the for public release; distribution is , DEPARTMENT OF THE ARMY28 SEPTEMBER 1990TM 10-6685-365-13&PThis TECHNICAL MANUAL is an authentication of the manufacturer's commercial literature and does notconform with the format and the content requirements normally associated with Army TECHNICAL manualsThis TECHNICAL MANUAL does, however, contain all essential information required to operate and maintain for public release.

2 Distribution Is INTRODUCTORY Forms and RecordsDepartment of the Army forms and procedures used for equipment maintenance will be those described by DA Pam 738-750, The Army Maintenance Management Errors and Recommending ImprovementsYou can help improve this MANUAL If you find any mistakes or if you know of a way to improve the procedures, please letus know Mail your letters, DA Form 2028 (Recommended Changes to Publications and Blank Forms), or DA Form2028-2 located In the back of this MANUAL , directly to Commander, Army Troop Support Command, ATTN AMSTR-MCTS, 4300 Goodfellow Blvd, St Louis, MO 63120-1798. A reply will be furnished to of Army Material to Prevent Enemy UseRefer to TM 750-244-3 for instructions covering the destruction of Army Material to prevent enemy Storage of of equipment In administrative storage should be for short periods of time when a shortage ofmaintenance effort exists.

3 Items should be In mission readiness within 24 hours or within the time factors as determinedby the directing authority During the storage period appropriate maintenance records will be placing equipment In administrative storage, current preventive maintenance checks and services shouldbe completed. Shortcomings and deficiencies should be corrected, and all modification work orders (MWO's) should site selection Inside storage is preferred for items selected for administrative storage. If inside storage isnot available, trucks, vans, conex containers and other containers may be (ii Blank)INSTRUCTION BOOK INSTALLATION2822 MAINTENANCE PROGRAMMING OPERATIONThis reference material for you to install, use, and maintain your Foxboro product. Foxboro assembles Instructions inthree different forms for transmittal to you.

4 These are:Instruction Book (Standard) - Provides information ona single model of the Foxboro product line. Updateservice is not Instruction Book (Optional) - Providesinformation on more than one model of the Foxboroproduct line. The book is sequentially organized byinstruction number. A custom index and Table ofContents allows you to quickly locate each instructionUpdate service is not Book (Optional) -- Provides information on aspecific product line ( , VIDEOSPEC) or group ofFoxboro products ( , instruments, SPEC 200). Themaster or service book contains all issues of instructionspertaining to all models and styles of each specificproduct or group of products. Automatic update serviceis documents in this book have been assembled to match your specific order requirements.

5 For additional informationor to order additional copies, call your local Foxboro SERVICESThe Foxboro Company provides a wide range of maintenance and customer services that allow you to design a programthat meets your needs For more information on these services, call your local Foxboro ServicesFoxboro offers responsive, factory-level maintenanceand engineering services performed by trainedspecialists through: Maintenance Programs Preventive Maintenance Corrective Maintenance Field Startup Services Program Management and Control EngineeringServices Application Engineering and ProgrammingServices Product Calibration Spare Parts Factory Repair and RefurbishmentEducational ServicesFoxboro offers training courses through the EducationalServices Department. Depending on your specifictraining requirements, courses can be provided atworldwide training centers or at your own facilities.

6 Youcan select a range of available programs from. Video-taped programs In-house courses On-site courses Self-study courses TextbooksTechnical Documentation ServicesThe Foxboro Corporate TECHNICAL CommunicationsDepartment writes and supplies referencedocumentation for you to install, use, and maintain yourFoxboro product. Documentation services available are: Standard product documentation Master book updates Additional documentsPREVENTIVE MAINTENANCEYou must observe the following when performing maintenance on your Foxboro products: Install the product in its specified environment Schedule periodic preventive maintenanceprograms Service your Foxboro products using onlyFoxboro service personnel or other qualifiedservice personnel Use only genuine Foxboro replacement partsVIDEOSPEC and SPEC 200 are trademarks of The Foxboro INSTRUCTIONSF oxboro designs, manufactures, and tests its products to meet many national and international , for these products to operate within their normal specifications, you must properly Install, use, andmaintain these products The following instructions must be adhered to and Integrated with your safetyprogram when Installing, using, and maintaining Foxboro products Read and save all instructions prior to installing, operating, and servicing the product.

7 If you do not understand any of the Instructions, contact your Foxboro representative for clarification. Follow all warnings, cautions, and instructions marked on and supplied with the product. Inform and educate your personnel in the proper Installation, operation, and maintenance of theproduct. Install your equipment as specified in Foxboro site planning/installation instructions and perapplicable local/national codes Connect all products to the proper electrical and/or pressure sources. Handle, move, and install each product using the appropriate number of personnel and movingdevices/equipment (dolly, forklift, crane, etc.) Failure to do so could cause serious personal injury. To ensure proper performance, use qualified personnel to install, operate, update, program, andmaintain the product.

8 When replacement parts are required, ensure that the qualified service technician uses replacementparts specified by Foxboro. Unauthorized substitutions may result in fire, electrical shock, otherhazards, or Improper equipment operation. Ensure that all equipment doors are closed and protective covers are in place, except whenmaintenance is being performed by qualified personnel, to prevent electrical shock and personal injury. Registered TrademarkFORM 8062 (1183)INSTALLATION1-110 Dec. '64 Page 1- INSTRUMENT MOUNTING -ROUND-CASE RECORDERS AND INDICATORSS elect a location which is well lighted, free from vibration, and free from wide and sudden variations in the instrument level on a rigid of Mounting and DimensionsElement and Electric ConnectionsPressure ConnectionsPneumatic Receiver ConnectionsElectric Connection1/4 NPT female (up to 2000 psi)1/4" compression fittings7/8" hole for 1/2"1/2 NPT male (above 2000 psi)

9 ConduitThe Foxboro CompanyFoxboro Massachusetts U S A 02035 Printed in U S A1-110 Page 2 Flush Mounting Drilling DimensionsThe Foxboro Company10,000 - 12/64 Foxboro Massachusetts U S A 02035 Printed in U S AGENERAL INSTRUCTIONSF oxboro designs, manufactures, and tests its products to meet many national and International , for these products to operate within their normal specifications, you must properly install, use, andmaintain these products The following Instructions must be adhered to and Integrated with your safetyprogram when Installing, using, and maintaining Foxboro products. Read and save all Instructions prior to installing, operating, and servicing the product. If you do not understand any of the instructions, contact your Foxboro representative forclarification.

10 Follow all warnings, cautions, and instructions marked on and supplied with the product. Inform and educate your personnel in the proper Installation, operation, and maintenance of theproduct. Install your equipment as specified in Foxboro site planning/installation instructions and perapplicable local/national codes Connect all products to the proper electrical and/or pressuresources. Handle, move, and install each product using the appropriate number of personnel and movingdevices/equipment (dolly, forklift, crane, etc.) Failure to do so could cause serious personal injury. To ensure proper performance, use qualified personnel to install, operate, update, program, andmaintain the product. When replacement parts are required, ensure that the qualified service technician usesreplacement parts specified by Foxboro.