Transcription of TIGER EYE FLAT IDC WIRE CABLES
1 SERIES-NO. PINSPER ROW-END OPTION-OVERALLLENGTH-01-N-OTHEROPTIONFFS D= Socket Strip 04, 05, 06, 08, 10, 11, 12, 13, 15, 17, 20, 25(Standard sizes) S = Single End D = Double End = Assembled Length N = NotchPolarization(Notch option not available with -04 position) RW= Reverse Wiring(Red wire opposite position #1) D XX = Daisy Chain SR= Strain Relief(Mates only with ESHF Series)(Not available with O, M, R or DXX) R= Reverse M= Middle Reverse(Requires DXX) O= Outside Reverse(Requires DXX) SPECIFICATIONSI nsulator Material:PBTC ontact: BeCuPlating:10 " ( m) Au over 50 " ( m) Ni on contact area; Sn over 50 " ( m) Ni on balanceWire: 30 AWGC urrent Rating (FFSD/FTSH): A per pin(2 pins powered)Operating Temp Range:-40 C to +105 CLead Size Accepted:( mm).
2 016" SQInsertion Depth:( mm) .104" to ( mm) .125"FFSDM ates:FTS, FTSH, EHF, SHF, ESHFNote: This Series is non-standard, End ( S)Double End ( D)Daisy Chain ( D XX ) XX 1/8"( mm) min.( mm) Relief ( SR)No. of positions x ( ) .050 + ( ) .31501( ).120No. of positions x( ) .050 + ( ) .165( ).200 Middle Reverse ( M)Reverse ( R)Outside Reverse ( O)Reverse Wiring ( RW) 01 02 Assembled Length ( )Assembled Length in INCHES (1/8")1 inch minimumOther Sizes (MOQ Required)ALSO AVAILABLETIGER EYE FLAT IDC WIRE CABLES ( mm) .050" PITCH FFSD otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec s specifications which are subject to change without notice. TIGEREYEIDCF-221
