UltraJet Nozzle - Akron Brass

1 Optional BIM InletsOptional JIM InletsOptional BSP InletsOptionalStorz Inlets43 UltraJl3eea t N3roazaNs .a4-- .554 .TTuTabjj- .5u6 .1uA4 aza2S7 PVn72gg .8P9 UltraJet NozzleThe UltraJet combines the powerful punch of a true smooth bore and the widespread protection of a full fog . This Nozzle simplifies fire ground operations with intuitive functionality, the ability to change patterns without shutting down and matching flows in all patterns, so there is no need to control pressure at the pump . Whether you prefer smooth bore or fog, the UltraJet incorporates the best of both worlds so you never have to compromise . Features Open and close the bale handle to turn the water on or off Twist the bumper to change the flow pattern Operates like a fixed orifice Nozzle Can be used with CAFS, premixed foam, portable eductors Low pressure operation at 50 psi (3 bar) reduces firefighter fatigue Flow Range 118 to 297 gpm (447 to 1124 lpm) Available in 1" (25 mm), 15/16" (24 mm), 7/8" (22 mm) and 3/4" (19 mm) tip sizes Meets all NFPA requirements CE Certified (EN15182-2) when using 3/4" smooth bore only 10 year warranty Standard Items include.

2 Black handle, black pistol grip, spinning teethNFPA1964 COMPLIANTALL ULTRAJETS* 3/4" Tip OnlyPatent PendingStyle 1820 Handle opens or shuts off the flow of waterFull grip textured bumper for stream pattern changes (smooth bore, narrow fog, wide fog)Raised lug on bumper for easy pattern identification and enhanced bumper ergonomicsSmooth bore and fog Nozzle all-in-oneEtched tip for easy identification of flowsUse with water or foamMatching flows in smooth bore and fogReflective labels and detents to assist in pattern identificationOptional field removable pistol gripColored pistol grip handle available to complement crosslays1 1/2" or 2 1/2" (38 mm or 65 mm) standard NH inlets with optional inlets available (BIM, JIM, Storz, BSP, ZT)Operates like a typical Nozzle for minimal trainingStyle 1820 NOZZLES5 UltraJet NozzleStyleStandard Inlet SizesLengthWeightTip OptionsTeethColored Pistol Grip and Bale HandleOptional InletsMax Operating Pressure18201 1/2, 2 1/2" (38, 65 mm)12" (305 mm)6.

3 2 lbs (2 .8 kg)3/4"*, 7/8", 15/16", 1" (19, 22, 24, 25 mm)Spinning PolymerStandard is Black . Field removable pistol grip if none is desired .BIM, BIF, Storz, BSP, JIM, ZT230 psi(16 bar)* 3/4" (19 mm) tip is CE EN 15182-2 certifiedSee page 173 Technical Date section for performance detailsPressureTip Size1" (25 mm)15/16" (24 mm) 7/8" (22 mm) 3/4" (19 mm)50 psi(3 .5 bar)210 gpm (795 lpm)184 gpm (700 lpm)161 gpm (609 lpm)118 gpm (447 lpm)75 psi(5 bar)257 gpm (973 lpm)226 gpm (855 lpm)197 gpm (746 lpm)145 gpm (549 lpm)87 psi (6 bar) CE277 gpm (1048 lpm)243 gpm (924 lpm)212 gpm (802 lpm)156 gpm * (590 lpm)100 psi (7 bar)297 gpm (1124 lpm)261 gpm (988 lpm)227 gpm (859 lpm)167 gpm (632 lpm)* 3/4" (19 mm) tip is CE EN 15182-2 certifiedTrue Smooth BoreNarrow FogFull NFPA Fog1 1/2 , 2 1/2" (38, 65 mm) UltraJet Nozzles Flow Range 118 to 297 gpm (447 to 1124 lpm) Available in 1" (25 mm), 15/16" (24 mm), 7/8" (22 mm) and 3/4" (19 mm) tip sizes Meets all NFPA requirements CE Certified (EN15182-2)

4 When using 3/4" smooth bore only 1815 Tip Kits 3/4, 7/8", 15/16", 1", (19, 22, 24, 25 mm) Standard items include: black handle, black pistol grip, spinning teeth1820 UltraJet Nozzle63 UltraJl3eea t N3roazaNs .a4-- .554 .TTuTabjj- .5u6 .1uA4 aza2S7 PVn72gg .8P9 Turbojet Nozzles Not every part number within a style number carries a certification . Contact Akron Brass customer service to verify specific Nozzle certifications (example: NFPA 1964, FM, CE, SOLAS, MED) .Optional BIM InletsOptional JIM InletsOptional BSP InletsOptionalStorz InletsNOZZLES7 Turbojet Nozzles Reduced Rotation from Fog to Straight StreamRaised Lug on the Selection Ring on 1" & 1 " (25 & 38 mm) Styles for Easier Flow IdentificationRaised Lug on the Bumper of all Styles for Easier Pattern IdentificationMultiple FlowSettingsComputer Engineered WaterwaySpinning Teeth orMolded TeethBaffles Etched with Pressurepsi & barFlush WithoutChanging Pattern or Shutting DownHigh Visibility Reflective Operating LabelsLightweight Pyrolite ConstructionWith or Without Pistol GripPistol Grips and Handles Availablein Various Colors!

5 Ergonomic Bale HandleFeatures: Pattern Identification Simple to operate (quarter turn from straight stream to fog) Raised lug marks straight stream for limited visibility operations Easy to service & repair Standard items include: black handle, black pistol grip, black bumper, spinning teethThe Akron adjustable gallonage Turbojet Nozzle is unmatched in today s fire service for its flexibility and flow control . The Turbojet is a constant gallonage Nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control . Use the Turbojet one time and it is easy to see why it s the Nozzle of choice by firefighters worldwide . 1", 1 1/2" or 2 1/2"(25, 38 or 65 mm)Full-TimeSwivel InletSOLASE uropeanStandardEN15182 Not every part number within a style number carries a certification.

6 Contact Akron Brass customer service to verify specific Nozzle certifications (example: NFPA 1964, FM, CE, SOLAS, MED) .83 UltraJl3eea t N3roazaNs .a4-- .554 .TTuTabjj- .5u6 .1uA4 aza2S7 PVn72gg .8P9 Turbojet Nozzles Style 1720 Style 1702 Style 1717 StyleSwivel Inlet LengthWeight lbs. (kg)Flow SettingsGPMLPM17011" (25 mm)9 1/4" (206 mm)2 1/2 (1 .1 kg)13-25-40-6050-100-150-230 1702*1" (25 mm)9 1/4" (206 mm)3 (1 .4kg)13-25-40-6050-100-150-230 17031 1/2 " (38 mm)6 5/8" (14 mm)1 3/4 ( .8 kg)13-25-40-6050-100-150-230 17041" (25 mm)9 1/4" (206 mm)3 (1 .4 kg)18-30** 13-23-30**70-115* 50-90-115**17111 1/2" (38 mm)6 5/8" (14 mm)3 3/4 (1 .7 kg)18-30** 13-23-30**70-115* 50-90-115** FM Approved Style 1702 100 psi (7 bar) pressure configurationSee page 174 Technical Data secton for performance detailsStyleSwivel Inlet LengthWeight lbs.

7 (kg)Flow SettingsGPMLPM17141 1/2" (38 mm)6 7/8" (165 mm)2 1/4 (1 kg)30-60-95-125115-230-360-475 17151 1/2" (38 mm)9 1/2" (232 mm)3 1/2 (1 .6 kg)30-60-95-125115-230-360-475 1716 1 1/2" (38 mm)12" (295 mm)3 3/4 (1 .7 kg)30-60-95-125 115-230-360-475 17171 1/2" (38 mm) 7 1/4" (175 mm)2 1/4 (1 kg)30-60-95-125 115-230-360-475 1718 1 1/2" (38 mm)12" (295 mm)4 1/8 (1 .9 kg)30-60-95-125 115-230-360-475 1720* 1 1/2" (38 mm)9 1/2" (232 mm)4 (1 .8 kg)30-60-95-125 115-230-360-475* FM Approved Style 1702 100 psi (7 bar) pressure configurationSee page 174 Technical Data secton for performance details1" (25 mm) Turbojet Nozzles Flow setting at 100 psi (7 bar) operating pressure, 87 psi (6 bar) optionale Raised bumper lug for straight stream pattern identification Compatible with Quick-Attack Foam Tube Style 790, See page 32 580 psi (40 bar) hydrostatic pressure Standard items include.

8 Black handle, black pistol grip, black bumper, spinning teeth1701 Turbojet Nozzle1702* Turbojet Nozzle with Pistol Grip SOLAS & approved available (Must specify) FM approved (Must specify)1703 Turbojet Tip with 1 1/2" (38 mm) inlet For use on Style 753 shutoff1704 Turbojet Nozzle with Pistol Grip Specify either 18-30 gpm or 13-23-30 gpm settings1711 Turbojet Tip with 1 1/2" (38 mm) inlet For use on Style 753 shutoff Specify either 18-30 gpm (70-115 lpm) or 13-23-30 gpm (50-90-115 lpm) settingsEuropeanStandardEN15182 StyleSwivel InletLengthWeight lbs. (kg)Flow SettingsGPMLPM17721" (25 mm)9 1/2" (241 mm)3 (1 .4 kg)13-25-40-6050-100-150-230 Style 1772**EuropeanStandardEN151821 1/2" (38 mm) Turbojet Nozzles 100 psi (7 bar) standard, 75 psi & 86 psi (5 & 6 bar) optional Compatible with Quick-Attack Foam Tube Style 792, See page 32 Standard items include.

9 Black handle, black pistol grip, black bumper, spinning teeth1714 Turbojet Tip1715 Turbojet Nozzle1716 Turbojet Breakapart Nozzle Combination of Style 1717 tip with twist shutoff + Style 2115 shutoff1717 Turbojet Tip with Twist Shutoff1718 Turbojet Breakapart Nozzle with Pistol Grip Combination of Style 1717 tip with twist shutoff + Style 2116 shutoff1720* Turbojet Nozzle with Pistol Grip SOLAS & approved (Must specify) FM approved (Must specify) 1" (25mm) 180 Fog Turbojet Nozzles 1772 180 Fog Turbojet with Pistol Grip Flow setting at 100 psi (7 bar) standard, 87 psi (6 bar) optional Fog pattern can be adjusted from straight stream to 180 for fog pattern SOLAS & approved (Must specify) Available in 2 1/2" (65 mm) Standard items include: black handle, black pistol grip, black bumper, spinning teethNot every part number within a style number carries a certification.

10 Contact Akron Brass customer service to verify specific Nozzle certifications (example: NFPA 1964, FM, CE, SOLAS, MED) .NOZZLES9 Turbojet Nozzles Style 1763 StyleSwivel Inlet* LengthWeight lbs. (kg)Flow SettingsGPMLPM17621 1/2" (38 mm)11" (279 mm)5 3/8 (2 .4 kg)30-95-125-150-200115-360-475-550-7501 763**1 1/2" (38 mm)11" (279 mm)5 3/4 (2 .6 kg)30-95-125-150-200115-360-475-550-7501 7641 1/2" (38 mm)10 1/2" (267 mm)5 1/4 (2 .4 kg)30-95-125-150-200115-360-475-550-7501 7651 1/2" (38 mm)10 1/2" (267 mm)5 9/16 (2 .5 kg)30-95-125-150-200115-360-475-550-7501 7661 1/2" (38 mm)7 1/2" (190 mm)3 1/2 (1 .6 kg)30-95-125-150-200115-360-475-550-7501 7671 1/2" (38 mm)7 1/2" (190 mm)3 1/2 (1 .6 kg)30-95-125-150-200115-360-475-550-750* FM Approved Styles 1763 100 psi (7 bar) rated pressure configurationSee page 174 Technical Data secton for performance detailsWide-Range Turbojet Nozzles Flow settings at 100 psi (7 bar) standard, 75 psi (5 bar) optional Compatible with Quick-Attack Foam Tube Style 796, See page 32 Optional 2.