Transcription of UNY MARINE - CSP
1 Sheet No. : 5 5 1 0 - K. Issued Date : Jan., 2006. UNY MARINE . (UM FC). UNY MARINE ,based on polyurethane resin, has excellent gloss retention, durability and chemical resistance, etc. It is suitable for protection of outside of superstructure of steel ships. TECHNICAL DATA. Type Polyurethane paint Recommended Use Glossy finish coat on outside of superstructure, deck and fittings. Mixing Ratio Base : Hardener = 80 : 20 (by volume). Color White, As specified Flash Point Base : 18 , Hardener : 30 . Solids by Volume 51 2 % (Test Method : ISO-3233). Coverage(Theoretical) / [ / ] at 50 . Wet Film Thickness 59 - 98 . Dry Film Thickness 30 - 50 . Drying Time Temperature 5 10 20 30 . (at 50 ) Surface Dry 50 min 30 min 20 min.
2 10 min. Hard Dry 12 hrs. 8 hrs. 6 hrs. 4 hrs. Painting Interval Minimum 8 hrs. 6 hrs. 4 hrs. 2 hrs. (at 50 ) Maximum * - - - - Pot Life 24 hrs. 20 hrs. 16 hrs. 8 hrs. Thinner UNY MARINE THINNER. Method of Application Airless spray, Brush, Roller Substrate Temperature : Minimum -5 . Humidity : Maximum 85 % For Airless spray ;. Condition of Application Tip No. : GRACO 515, 615, 715, 813. Paint output pressure : MPa(120 150 f/ ). Viscosity : 25 - 35 sec.(Ford Cup ). Thinning : 5 - 15 % by volume BANNOH 500, BANNOH 2000, SUPER BONDEX M, BANNOH 200, Preferable Preceding Coats EPICON MARINE UNDERCOAT M, etc. Preferable Subsequent Coats - Packaging Two pack product Note : * Please refer to the painting specifications. The information given in this sheet is effective at the date shown above and subject to revision from time to time without notice.
