User's Manual Safety Control Stations (Hardware)

1 User'sManualSafety ControlStations ( hardware ) IM 32Q06C10-31 EIM 32Q06C10-31E4th EditionIntroductionProSafe-RS is a Safety Control system consisted of a Safety Control station (SCS) and a safetyengineering PC (SENG).This User s Manual describes the hardware of SCS and how to connect the Control bus inter-face card to of This DocumentThe purpose of this document is to help readers to fully understand the SCS hardware as wellas the hardware installation and maintenance so as to take full advantage of the document consists of 8 chapters. Chapter Configuration and Names of ComponentsExplains the input and output modules and peripherals used to construct the ProSafe-RSsystem.

2 Chapter DevicesExplains how to install the main parts of SCS hardware and the terminal boards and howto reserve the service area. Chapter ConnectionExplains the wiring methods of power supply cables, grounding cables and Control buscables. Chapter and Functions of Each UnitExplains the features of the modules and units used for constructing the Safety controlunit and Safety node unit as well as the LED displays and major setting items. Chapter Cable Connection to Input/Output ModulesExplains how to connect the I/O modules with the field devices. Chapter Bus Interface CardExplains how to install the Control bus interface card to the PC/AT compatible PC, how toconnect Control bus cable to the interface card and how to set its station address.

3 Chapter of ProSafe-RS HardwareExplains the main methods on routine inspections, inspection through the system man-agement window, online maintenance and periodical replacement of the parts (the partsthat have defined life span) as well as replacement procedures. Chapter BoardExplains the handling relay board, cable connection and No. IM 32Q06C10-31E (CD)4th Edition : Jan. 2015 (YK)All Rights Reserved Copyright 2011 , Yokogawa Electric CorporationIM 32Q06C10-31E 4th Edition : ,2015-00 Safety Precautions for UsenSafety, Protection, and Modification of the Product To protect the system controlled by the Product and the Product itself and to ensure safeoperation, please observe the Safety precautions described in this Manual .

4 YokogawaElectric Corporation ("YOKOGAWA") assumes no liability for Safety if users fail to observethe Safety precautions and instructions when operating the Product. If the Product is used in a manner not specified in the User's Manuals, the protection pro-vided by the Product may be impaired. If any protection or Safety circuit is required for the system controlled by the Product or forthe Product itself, please install it externally. Use only spare parts that are approved by YOKOGAWA when replacing parts or consum-ables of the Product. Do not use the Product and its accessories such as power cords on devices that are notapproved by YOKOGAWA.

5 Do not use the Product and its accessories for any purposeother than those intended by YOKOGAWA. Modification of the Product is strictly prohibited. The following symbols are used in the Product and User's Manuals to indicate the accom-panying Safety precautions:Indicates that caution is required for operation. This symbol is labeled on the Prod-uct to refer the user to the User's Manuals for necessary actions or behaviors inorder to protect the operator and the equipment against dangers such as electricshock. In the User's Manuals, you will find the precautions necessary to preventphysical injury or death, which may be caused by accidents, such as electricshock resulting from operational a protective conductor terminal.

6 Before using the Product, you mustground the protective conductor terminal to avoid electric a functional grounding terminal. A terminal marked "FG" also has thesame function. This terminal is used for grounding other than protective using the Product, you must ground this an AC a DC the ON position of a power on/off the OFF position of a power on/off on Handling User's Manuals Hand over the User's Manuals to your end users so that they can keep the User's Man-uals on hand for convenient reference. Thoroughly read and understand the information in the User's Manuals before using theProduct.

7 For the avoidance of doubt, the purpose of the User's Manuals is not to warrant that theProduct is suitable for any particular purpose but to describe the functional details of theProduct. Contents of the User's Manuals are subject to change without 32Q06C10-31E 4th Edition : ,2015-00 Every effort has been made to ensure the accuracy of contents in the User's , should you have any questions or find any errors, contact us or your local dis-tributor. The User's Manuals with unordered or missing pages will be and Disclaimer Except as specified in the warranty terms, YOKOGAWA shall not provide any warranty forthe Product.

8 YOKOGAWA shall not be liable for any indirect or consequential loss incurred by eitherusing or not being able to use the on HardwarelAppearance and AccessoriesCheck the following items when you receive the Product: Appearance Standard accessoriesContact us or your local distributor in the following cases: The Product coating is peeling off. The Product itself is damaged. Any accessories are the following label turns dirty and the information on it becomes illegible, or if the label ispeeling off, order a new one with the part number T9029BX to replace it.: Label attached to the Products such as the power supply and Suffix CodesThe name plate on the Product contains the model and suffix codes.

9 Verify the model and suf-fix codes with those in the General Specifications (GS) to ensure that the Product matchesthe order specifications. Should you have any questions, contact us or your local 32Q06C10-31E 4th Edition : ,2015-00 Documentation ConventionsnSymbolsThe following symbols are used in the User's instructions that must be observed to avoid physicalinjury, electric shock, or instructions that must be observed to prevent damageto the software or hardware , or system failures of the important information required to understand opera-tions or additional referenced online manuals, you can view the referenced content by click-ing the links that are in green text.

10 However, this action does notapply to the links that are in black ConventionsDrawings used in the User's Manuals may be partially emphasized, simplified, or omitted forthe convenience of of windows may be slightly different from the actual screenshots with different set-tings or fonts. The difference does not hamper the understanding of basic functionalities andoperation and monitoring with CENTUMThe Product can be integrated with CENTUM VP or CENTUM CS 3000. In the User's Man-uals, the integration with CENTUM VP or CENTUM CS 3000 is referred to as "Integration withCENTUM.