VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC ...

1 VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC CONFIGURATION 2017 Emerson. All Rights a robust integral-to-body valve seat and optimized seating angles, this valve is capable of handling isolation and process control through multiple functionalitiesTECHNICAL DATAS izes: DN 80 - 3000 (NPS 3 - 120)Pressure ratings: ASME class 150 - 1500; EN PN 10 - 250 Temperature range: -60 C to +450 C (-76 F to +842 F)StandardsDesign: API 609, EN 593; ASME , EN 12516 Flange: ASME ; EN 1092-1; ISO 7005 Face to face: ISO 5752; EN 558; ASME ; API 609 GENERAL APPLICATIONSS uitable for handling the broadest range of fluids in oil & gas, petrochemical, chemical, coal, desalination, waterworks, food & beverage industries.

2 Also for solar, geothermal and hydro power, fossil fuels, district heating, mining, shipyards and the aerospace 30,000 valves are suitable for processes containing:Crude oil; jet fuel; kerosene; gasoline; acid gas; sour gas; natural gas; syngas; carbon dioxide; flare gas; tail gas; ethylene; ethylene glycol; ethylbenzene; butadiene; styrene; hydrogen; oxygen; nitric, acrylic, sulphuric, hydrochloric, hydrofluoric, acetic acid; hydrogen peroxide; alcohols; ammonia; amines; chlorine; vinyl chloride; steam; geothermal steam; heat transfer fluids; flue gas; coke oven gas; potable water; sea water; waste * VANESSA TRIPLE OFFSET valves perform bidirectional zero leakage tightness (according to Leakage Rate A of ISO 5208 and EN 12266-1 standards, and the Resilient Seat Valves requirement of API 598) through non-rubbing 90-degree rotation and metal-to-metal torque 18/07 FEATURES Robust and fire-resistant all-metal construction.

3 Stellite grade 21 seat overlays provide excellent durability. Resilient metal seal ring ensures perfect seating force distribution around precision-machined seat circumference. Easily replaceable multi-layered duplex and graphite seal rings. Robust one-piece shaft designed to transfer/maintain torque efficiently. Two-piece packing gland and graphite packing minimize external emission risk. Key secured shaft-to-disc connection for maximum shaft integrity. Heavy duty bearings withstand high pressure loads and wear. Braided graphite bearing protectors prevent dirt intrusion, ensuring constant running torque and valve operability.

4 Internal and external shaft extrusion risk handling complies with international standards. Flange spot facing ensures bolting nut and washer planarity, increasing joint reliability and safety. Open/closed disc references and external disc position indicator simplify installation/removal procedures to API 609. Spiral wound gaskets , seal and packing rings replaceable with no special and dimensional tables published in this datasheet represent a selection from a much wider range available. For more information, please contact your nearest Emerson sales office or register on VANESSA Client Area at: SERIES 30,000 TRIPLE OFFSET VALVESASME TYPICAL MATERIAL SELECTIONASME TYPICAL MATERIAL SELECTION - please refer to BASIC configuration sectional drawing on page 3 ItemNoteDescriptionBody in carbon steel (gr.)

5 WCC)(1)Body in carbon steel (gr. LCC)(1)Body in stainless steel (2)1 BodyASTM A216 WCC ASTM A352 LCC ASTM A351 CF3M / CF8 MWeld surfacing on seatStellite Cast discASTM A216 WCCASTM A352 LCCASTM A351 CF3M / CF8 MForged discASTM A105 / ASTM A350 LF2 (dual grade)ASTM A105 / ASTM A350 LF2 (dual grade)ASTM A182 UNS S31600 / UNS S31603 (F316 / F316L)Retainer flangeASTM A516 gr. 70 ASTM A516 gr. 70 ASTM A240 UNS S31600 / UNS S31603 ( / )Retainer flange screwISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)4 ShaftASTM A479 UNS S41000 (13 Cr SS)ASTM A479 UNS S41000 (13 Cr SS)ASTM A479 XM19 - UNS S20910 (Nitronic 50 )5 Packing bushingUNS S31600 / UNS S31603 (AISI 316 / 316L)UNS S31600 / UNS S31603 (AISI 316 / 316L)UNS S31600 / UNS S31603 (AISI 316 / 316L)Stud nutISO 3506 A4 (ASTM F738 gr.

6 A4)ISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)Stud boltsISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4) Packing flangeUNS S31600 / UNS S31603 (AISI 316 / 316L)UNS S31600 / UNS S31603 (AISI 316 / 316L)UNS S31600 / UNS S31603 (AISI 316 / 316L)6 Bottom flange ASTM A516 gr. 70 or ASTM A216 WCC or ASTM A105 / A350LF2 ASTM A516 gr. 70 or ASTM A352 LCC or ASTM 350 LF2 ASTM A240 / A182 UNS S31600 / UNS S31603 (AISI 316 / 316L) or ASTM A351 CF8M / CF3 MScrewISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)ISO 3506 A4 (ASTM F738 gr. A4)7 Thrust bearingUNS S31600 / UNS S31603 (AISI 316 / 316L) hard facedUNS S31600 / UNS S31603 (AISI 316 / 316L) hard facedUNS S31600 / UNS S31603 (AISI 316 / 316L) hard faced8 BearingUNS S31600 / UNS S31603 (AISI 316 / 316L) hard facedUNS S31600 / UNS S31603 (AISI 316 / 316L) hard facedUNS S31600 / UNS S31603 (AISI 316 / 316L) hard facedBearing protectorGraphite ringGraphite ringGraphite ringS PackingGraphiteGraphiteGraphite Bottom spiral wound gasketUNS S31600 / UNS S31603 + graphiteUNS S31600 / UNS S31603 + graphiteUNS S31600 / UNS S31603 + graphite Seal ringUNS S31803 (duplex)

7 + graphite orUNS S31803 (duplex) + graphite orUNS S31803 (duplex) + graphite orUNS S17400 (17-4 PH) hard facedUNS S17400 (17-4 PH) hard facedUNS S20910 (Nitronic 50 ) hard faced Seal ring spiral wound gasketUNS S31600 / UNS S31603 + graphiteUNS S31600 / UNS S31603 + graphiteUNS S31600 / UNS S31603 + graphiteNOTES(1) Heat treated ASTM A216 WCC (-46 C to + 426 C) can be used without any restrictions from a design temperature of -46 Steel (WCC and LCC) valve material selection is compliant with the requirements of NACE MR0103 / ISO 17945 and NACE MR0175 / ISO 15156 for H2S partial pressures 10 kPa and pH values (2) Cast material ASTM A351 CF3M/CF8M is DUAL GRADE CERTIFIED.

8 Forged & plate material UNS 31600/UNS S31603 (AISI 316/ AISI 316L) is DUAL GRADE Steel (CF3M) valve material selection is compliant with the requirements of NACE MR103 / ISO 17945 and NACE MR0175 / ISO 15156 Materials are exclusively selected by factory depending on valve size. Suggested spare parts. Solid seal rings in UNS S17400 (17-4 PH) or UNS S20910 (Nitronic 50 ) are supplied depending on applications and can be requested as an option. For ASME class 900 and above solid seal rings are standard SERIES 30,000 TRIPLE OFFSET valves are also manufactured in a wide range of valve body materials, including: high temperature alloy steel WC6, WC9, C5, C12; austenitic stainless steel CF8, CF3, CF8C, CF10; Duplex and Super Duplex stainless steel CD3MN, CD3 MWCuN; high alloy austenitic stainless steel 6Mo (CN3MN) and Alloy 20 (CN7M), many different nickel alloys including Monel, Incoloy, Hastelloy, Inconel.

9 Nickel aluminum bronze and SERIES 30,000 TRIPLE OFFSET VALVESBASIC CONFIGURATION SECTIONAL DRAWINGStud boltStud nutPacking flangeDisc SWGR etainer flange screwSeal ringRetainer flangeShaftDiscBearingPackingBodyPacking bushingThrust bearing Bottom flangeBottom flange SWGS crewAvailable body styles:Double flangedLugWaferButtweldSeat4803333125294 26022,3203532041603237100436314132429022 ,3229532041604853150640316536433023,9267 5320416066712008476214428385272926927830 0981072501052224347042528,63308428930013 51473001259028654049030,2356973566001791 953501462531257552533,438197356600230246 4001666335059454535406118379600303327450 1870838363558038,14321384477003663995002 076840769564041,345713844770044848160024 81848474569046, , , , , , , , , , , , , , , , , , , , , , , ,3114532041603035100436314132429022,3127 532041604550150640316536433023,914053204 1605560200847621442838527152692783009099 2501052224347042528.

10 6165842893001251373001259028654049030,21 78973566001651813501462531257552533,4190 9735660020021640016663350594545352161183 796002602844501870838363558038,122213844 77003153485002076840769564041,3229138447 7003954286002481848474569046,12671384566 00570609 VANESSA SERIES 30,000 TRIPLE OFFSET VALVESDIMENSIONS AND WEIGHTS / ASME CLASS 150 DOUBLE FLANGED LONG - face to face API 609 long pattern - ASME (Metric)ABCEFTLIX VValveTotalDNNPS mmmmmmmmmmmmmmmmmmkgkgASME Class 150 - Trim BPlease see notes on page 20 DOUBLE FLANGED SHORT - face to face ISO 5752 BASIC SERIES 13 (Imperial)ABCEFTLIX VValveTotalNPSDN inchinchinchinchinchinchinchinchinchlbsl bsDOUBLE FLANGED LONG - face to face API 609 long pattern - ASME (Imperial)ABCEFTLIX VValveTotalNPSDN inchinchinchinchinchinchinchinchinchlbsl bsASME Class 150 - Trim BDOUBLE FLANGED SHORT - face to face ISO 5752 BASIC SERIES 13 (Metric)ABCEFTLIX - face to face API 609 Class 150 (Metric)ABCELNIX VValveTotalDNNPS mmmmmmmmmmmmmmmmmmkgkgVANESSA SERIES 30,000 TRIPLE OFFSET VALVESDIMENSIONS AND WEIGHTS / ASME CLASS 150 ASME Class 150 - Trim BPlease see notes on page 20 LUG - face to face API 609 Class 150 (Imperial)