Example: marketing

vErTE-STACK CrESCENT PEEK vertebral Body Spacer

VErTE- stack CrESCENT PEEK vertebral body SpacerThe vErTE- stack CrESCENT PEEK vertebral body Spacer (vBS) is a replacement device intended for use in the thoracolumbar spine (T1-L5) to replace a collapsed, damaged, or unstable vertebral Spacer is made of a medical grade PEEK (polyetheretherketone) polymer with four tantalum wires embedded for use as radiographic markers. It is available in 25mm, 30mm, and 36mm lengths. Bulleted nose allows for easy insertion 25mm, 30mm, and 36mm lengths 6 lordosis 4 radiographic markers Teeth for rigid fixation Consistent A/P width of 10mm for each construct length Straight and 15 offset Inserter attachment optionsverte- stack CrESCENT Peek vertebral body spacerDesign Featuresradiographic MarkersLateralAnterior/Posterior15 offset denoted by a T on the right side of the anterior portion of the constructFigure 5: Under-rotated when inserted via patient s right side Over-rotated when inserted via patient s left sideFigure 6: Over-rotated when inserted via patient s right side Under-rotated when inserted via patient s left sideFigure 4: Final PlacementFigure 3: Under- or over-rotated constructFigure 1: Final PlacementIf you see Figure 2 or 3 on lateral films, take an a/P (Figures 5 or 6) to determine whether your construct is under- or over-rotatedFigure 2.

vErTE-STACK ® CrESCENT™ PEEK vertebral Body Spacer The vErTE-STACK® CrESCENT™ PEEK vertebral Body Spacer (vBS) is a replacement device intended for …

Tags:

  Casper, Body, Stack, Keep, Crescent, Vertebral, Revet, Verte stack crescent peek vertebral body spacer, Verte stack, 174 crescent peek vertebral body spacer

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of vErTE-STACK CrESCENT PEEK vertebral Body Spacer

1 VErTE- stack CrESCENT PEEK vertebral body SpacerThe vErTE- stack CrESCENT PEEK vertebral body Spacer (vBS) is a replacement device intended for use in the thoracolumbar spine (T1-L5) to replace a collapsed, damaged, or unstable vertebral Spacer is made of a medical grade PEEK (polyetheretherketone) polymer with four tantalum wires embedded for use as radiographic markers. It is available in 25mm, 30mm, and 36mm lengths. Bulleted nose allows for easy insertion 25mm, 30mm, and 36mm lengths 6 lordosis 4 radiographic markers Teeth for rigid fixation Consistent A/P width of 10mm for each construct length Straight and 15 offset Inserter attachment optionsverte- stack CrESCENT Peek vertebral body spacerDesign Featuresradiographic MarkersLateralAnterior/Posterior15 offset denoted by a T on the right side of the anterior portion of the constructFigure 5: Under-rotated when inserted via patient s right side Over-rotated when inserted via patient s left sideFigure 6: Over-rotated when inserted via patient s right side Under-rotated when inserted via patient s left sideFigure 4: Final PlacementFigure 3: Under- or over-rotated constructFigure 1: Final PlacementIf you see Figure 2 or 3 on lateral films, take an a/P (Figures 5 or 6) to determine whether your construct is under- or over-rotatedFigure 2.

2 Under- or over-rotated constructIf you see Figure 1 or 4, the construct is in its proper final positionIf under-rotated, continue to use the Inserter and Tamps to turn the construct. If over-rotated, use the Anterior Pusher to derotate the rightPatient LeftPatient rightPatient LeftPatient rightPatient Leftverte- stack CrESCENT Peek vertebral body spacerDesign FeaturesGraft volume and Surface Arearadiographic Markers25mm length Surface area = 133mm2A/P width = 10mmDescriptionGraft volume25mm x x x x x x x x x length Surface area = 156mm2A/P width = 10mmDescriptionGraft volume30mm x x x x x x x x x length Surface area = 180mm2A/P width = 10mmDescriptionGraft volume36mm x x x x x x x x x device is intended as vertebral body replacement in the thoracolumbar spine. They may be used individually or stacked to accommodate the specific anatomic requirements of the vertebral space created by the corpectomy.

3 Additional anterior and/or posterior spinal instrumentation must be placed to augment stability. This device is not intended for cervical or posterior spinal implantation. Please see the package insert for the complete list of indications, warnings, precautions, and other medical ConfigurationPart NumberDescriptionQty4300000 PEEK SUITCASE 19192507vErTE- stack CrESCENT PEEK vBS, 25mm x 7mm29192508vErTE- stack CrESCENT PEEK vBS, 25mm x 8mm 29192509vErTE- stack CrESCENT PEEK vBS, 25mm x 9mm29192510vErTE- stack CrESCENT PEEK vBS, 25mm x 10mm29192511vErTE- stack CrESCENT PEEK vBS, 25mm x 11mm29192512vErTE- stack CrESCENT PEEK vBS, 25mm x 12mm29192513vErTE- stack CrESCENT PEEK vBS, 25mm x 13mm29192514vErTE- stack CrESCENT PEEK vBS, 25mm x 14mm29192515vErTE- stack CrESCENT PEEK vBS, 25mm x 15mm29193007vErTE- stack CrESCENT PEEK vBS, 30mm x 7mm29193008vErTE- stack CrESCENT PEEK vBS, 30mm x 8mm 29193009vErTE- stack CrESCENT PEEK vBS, 30mm x 9mm 29193010vErTE- stack CrESCENT PEEK vBS, 30mm x 10mm29193011vErTE- stack CrESCENT PEEK vBS.

4 30mm x 11mm29193012vErTE- stack CrESCENT PEEK vBS, 30mm x 12mm 29193013vErTE- stack CrESCENT PEEK vBS, 30mm x 13mm29193014vErTE- stack CrESCENT PEEK vBS, 30mm x 14mm29193015vErTE- stack CrESCENT PEEK vBS, 30mm x 15mm 29193607vErTE- stack CrESCENT PEEK vBS, 36mm x 7mm19193608vErTE- stack CrESCENT PEEK vBS, 36mm x 8mm19193609vErTE- stack CrESCENT PEEK vBS, 36mm x 9mm 19193610vErTE- stack CrESCENT PEEK vBS, 36mm x 10mm19193611vErTE- stack CrESCENT PEEK vBS, 36mm x 11mm 19193612vErTE- stack CrESCENT PEEK vBS, 36mm x 12mm 19193613vErTE- stack CrESCENT PEEK vBS, 36mm x 13mm19193614vErTE- stack CrESCENT PEEK vBS, 36mm x 14mm 1verte- stack CrESCENT Peek vertebral body more information go to ;118 2008 Medtronic Sofamor Danek USA, Inc. All rights reserved. MEDTrONICS pinal and Biologics Business Worldwide Headquarters2600 Sofamor Danek DriveMemphis, TN 381321800 Pyramid PlaceMemphis, TN 38132(901) 396-3133(800) 876-3133 Customer Service: (800) 933-2635