Example: stock market
Viega ProPress and MegaPress Systems
grooved and threaded connections, you don’t have to jeopardize the ... is offered in copper, Zero Lead bronze, and 304 and 316 stainless steel. Copper, Zero Lead bronze and 316 stainless come with a factory-installed EPDM sealing element in sizes 1/2" to 4". Exchangeable FKM sealing elements in 1/2" to 4" and HNBR
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
PureFlow PEX Tubing Tech Data
www.viega.usAll Viega PureFlow PEX tubing is copper tube size dimension (CTS), SDR-9 wall thickness, and meets the requirements of ASTM F876 and F877. Materials ... Design temperature and pressure ratings for Viega PureFlow PEX are 160 psi @ 73°F, 100 psi @ 180°F, and 80 psi @ 200°F.
Viega ProPress Stainless
www.viega.usViega ProPress systems are state-of-the-art press fitting systems that provide economical and reliable installations for the commercial, industrial, and residential markets. Viega ProPress 304 FKM and ProPress 316 are stainless steel tube, fittings, and valves in copper tube size (CTS) ranging from ½ inch to 4 inches.
Installation Manual - Viega
www.viega.us5.2 Limited Warranty for Viega Metal Systems for Industrial Applications _____39 5.3 Limited Warranty for Viega Marine Applications _____41 Table of Contents, continued. IM-PP 724607 0620 ProPress (EN) 5 of 44 Table of Contents List of Tables Table 1 ProPress approved applications_____8 ...
Viega MegaPress Fittings
www.viega.usMegaPress fittings with an EPDM seal are not approved for potable water or fuel gas applications. For more specific information on applications for MegaPress, contact Viega Technical Services at 1-800-976-9819. MegaPress ½" to 2" systems are approved for underground use and must be protected against corrosion in accordance
Related documents
The Plumbers Handbook - A Copper Alliance Member
copper.com.auRoll Grooved Joints ... Copper tubes, manufactured to meet the requirements of AS 1432, are incised at 0.5m intervals along the tube with the manufacturer’s trademark, the Australian Standard number, nominal size and thickness type e.g. Trademark AS 1432 DN 15B
Prehistoric Britain - British Museum
www.britishmuseum.orgGrooved Ware. Prehistoric Britain Before your visit Bronze Age Britain Around 2400 BC a new set of beliefs and practices, known as the Beaker ‘package’, ... rites, people, objects and technology including the skill of copper and gold metal working. Initially items were made from copper, then from around 2200 BC bronze (which is harder than ...
TECH INFORMATION FROM CLEVITE ENGINE PARTS
www.stealth316.comgrooved to maximize oil flow to the rod bearings. Both rods and mains have high crush for ... Lead-indium overlay offers somewhat better confor mability than lead-tin- copper overlay with slightly reduced wear resistance. “M Series” “Clevite micro” bearings make up the M series. These are special purpose bearings having a
Product Data - Carriercca.com
carriercca.comStandard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Carrier heat pumps and air conditioners. Units come with solid state fan controls, 1--inch (25mm) thick insulation with R--value of 4.2, multi--speed motors, and fully--wettable coils. Units can
RACE SERIES APPLICATION GUIDE 2020
www.aclraceseries.comFull (180°) grooved uppers with matching partial groove in lowers. • Reduces interruption to big end oil supply. Tapered groove run-out. • Smooths big end supply cut-off avoiding pressure pulsing and cavitation. Enlarged ID Chamfers Accommodate larger fillet radii on performance crankshafts. 0 20 40 60 80 100 120 140 160 180 200 220
Tile Tech IPÊ-Tile
www.tiletechpavers.comChromated copper arsenate in wood offers excellent resistance, but with potential health and environmental risks. Generally resistant. Different types will vary greatly Resistant to decay, but relativelysoft and quick to weather. Appearance Also known as "Ironwood", is an extremely dense, tight grained. No splinters, surface