vPolyTanTM Polymer Surface-Mount Chip Capacitors, Molded ...

1 Polytech Revision: 16-Aug-20181 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Polymer Surface Mount Chip Capacitors, Molded Case, High Performance TypePERFORMANCE / ELECTRICAL CHARACTERISTICSO perating Temperature: -55 C to +105 CCapacitance Range: F to 1000 FCapacitance Tolerance: 20 %Voltage Rating: VDC to 63 VDCFEATURES Ultra low ESR Molded case available in 8 case codes Terminations: cases J, P: 100 % tin case A: 100 % tin or Ni / Pd / Au cases T, B, Z, V, D: Ni / Pd / Au Compatible with high volume automatic pick and place equipment Moisture sensitivity level 3 Material categorization: for definitions of compliance please see Decoupling, smoothing, filtering Bulk energy storage in wireless cards Infrastructure equipment Storage and networking Computer motherboards Smartphones and tabletsORDERING INFORMATIONT55B156M6R3C0500 TYPECASECODECAPACITANCECAPACITANCETOLERA NCEDC VOLTAGERATINGTERMINATION /PACKAGINGESRSeeRatingsandCaseCodestable This is expressed inpicofarads.

2 The firsttwo digits are thesignificant third is thenumber of zerosto = 20 %2R5 = V004 = 4 V6R3 = V010 = 10 V12R = V016 = 16 V020 = 20 V025 = 25 V035 = 35 V050 = 50 V063 = 63 VC = lead (Pb)-freesolderable coating,7" reelMaximum100 kHz ESRin m DIMENSIONS in inches [millimeters]Anode indication belt markLWWHallJ caseAnode indication belt markLWWHllaP Polytech Revision: 16-Aug-20182 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Rating in development, contact factory for availabilityCASE CODEEIA SIZEL [ ] [ ] [ ] [ ] [ ] [ ] [ ] max.[ max.] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] max.[ max.] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]RATINGS AND CASE CODES F V10 V16 V20 V25 V35 V50 V63 / PJ / / P / AP / / AABBB10J / P / AP / AABBBD15P / AAATBBBV22AA / BA / T / BA / T / BBZ / V / D33AA / BA / T / BA / T / BVZ / V / DD47AA / T / BA / T / BBZ / V / DZ / V68A / BA / T / BT / BV100A / T / BA / T / BA / T / B /Z / V / DAZ / V / DZ / V / DDD150BB / Z / VB / Z / VV / DD220B / VB / Z / V / D B / Z / V / DV / D330B / Z / V / DZ / V / DV / DD470B / Z / V / DZ / DV / D680DD1000 DDIMENSIONS in inches [millimeters]Anode indication belt markA, B, T caseaLHWllD, V, Z Polytech Revision: 16-Aug-20183 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Marking code repeats every four years in alphabetical order (letter of I, i, O, and o are excluded)MARKINGVOLTAGE CODECAPACITANCE CODEVCODECAP, (7) CODEYEARMONTH1234567891011122013 ABCDEFGHJKLM2014 NPQRSTUVWXYZ2015abcdefghjklm2016npqrstuv wxyz2017 ABCDEFGHJKLM2018 NPQRSTUVWXYZ2019abcdefghjklm2020npqrstuv wxyzA7 JASimplified code of nominalcapacitance (A7: 10 F)Simplified code of ratedvoltage (J: (7) V)Anode indication belt mark+A caseDate code+T, B, Z, V, D caseDate codeNA JS7 Anode indication belt markSimplified code ofrated voltage (J: V)Simplified code ofnominal capacitance (S7: 47 F)Type of series(N: T55)SJSimplified code of nominalcapacitance (S: F)Simplified code of ratedvoltage (J: V)Anode indication belt mark+J, P Polytech Revision: 16-Aug-20184 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

4 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h) VDC AT +105 (1) Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-20185 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-20186 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 (1) RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-20187 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-20188 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

6 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-20189 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 (1) (1) VDC AT +105 VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-201810 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

7 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 (1) (1) VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-201811 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +105 VDC AT +105 VDC AT +105 VDC AT +105 VDC AT +105 VDC AT +105 RATINGSCAPACITANCE( F)CASE CODEPART NUMBERMAX. DCLAT 25 C( A)MAX. DF AT 25 C120 Hz(%)MAX. ESR AT + 25 C100 kHz(m )MAX. RIPPLEAT 45 C100 kHz IRMS(A)HIGH TEMPERATURE LOAD, TIME(h)Notes Termination code C : cases J, P: 100 % tin, case A: 100 % tin or Ni / Pd / Au, cases T, B, Z, V, D: Ni / Pd / Au(1)Rating in development, contact factory for Polytech Revision: 16-Aug-201812 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

8 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VOLTAGE DERATING GUIDELINESCAPACITOR VOLTAGE RATINGOPERATING DISSIPATIONCASE CODEMAXIMUM PERMISSIBLE POWER DISSIPATION (W) AT +45 C IN FREE PACKAGING QUANTITYCASE CODEUNITS PER 7" Polytech Revision: 16-Aug-201813 Document Number: 40174 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Test conditions per JIS C5101-1(1)Test time, please refer to table Standard Ratings PERFORMANCE CHARACTERISTICSITEMCONDITIONPOST TEST PERFORMANCET emperature characteristicsMeasure the specified characteristics in each stageSpecifiedinitial value-55 C+105 CCapacitance change--30 % to 0 %0 % to +50 %Dissipation factor shown in Standard Ratings table or less8 to 1014-Leakage currentRefer toStandardRatingstable-Not more than1 CV or 30 Awhich is greaterSurge voltage105 C, 1000 successive test cycles in series with a 1 k resistor at the rate of 30 s ON, 30 s OFF.

9 Test voltage per table below:Capacitance change Within 20 % of initial value Rated 10 16 20 25 35 50 63 Dissipation factorWithin initial limitSurge 13 20 23 29 40 57 72 Leakage currentShall not exceed 300 % of initial limit Solder heat resistanceReflow board surface peak temperature: less than 260 C Time: 5 s change Within 20 % of initial value Dissipation factorInitial specified value or lessLeakage currentShall not exceed 300 % of initial specified value Moisture resistance no loadLeave at 60 C and 90 % RH for 500 hCapacitance changeVR 4 VRelative to the value before test +50 % to -20 %VR VRelative to the value before test +40 % to -20 %Dissipation factorInitial specified value or lessLeakage currentShall not exceed 300 % of initial specified value High temperature load105 C. The rated voltage is applied through a protective resistor of 3 for 1000 h or 2000 h (1)Capacitance change Within 20 % of initial value Dissipation factorInitial specified value or lessLeakage currentShall not exceed 300 % of initial specified value Thermal shockLeave at -55 C, normal temperature, 105 C, and normal temperature for 30 min.

10 , 15 min. 30 min., and 15 min. Repeat this operation 5 times change Within 20 % of initial value or lessDissipation factorInitial specified value or lessLeakage currentShall not exceed 300 % of initial specified value Failure rate105 C. The rated voltage is applied through a protective resistor of 1 % / 1000 hPolymer Revision: 04-Jun-20181 Document Number: 40076 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT for Tantalum Solid Electrolyte Chip Capacitorswith Polymer CathodeINTRODUCTIONT antalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum/tantalum oxide/manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic is not found in its pure state.