WATTI a nfire gent - vescom.com

1 WATTI nfireagentglobal safetyReaction to fire classification reportNo, 16208 COwner of the classification reportTAPETEX bvChurchilllaan 105705 BK HelmondThe NetherlandsDistributor: Vescom bvSint - Jozefstraat205750 AB DeurneThe NetherlandsFOUNDINC MEMBER lntroductionThis classification repoft defines the classification assigned to theproduct 'Tapetex - 64 Linen Wall Material' in accordance withthe procedures given in the standard EN 13501 +A1: classification of construction products and building elements -Paft 1. classification using data from reaction to fire classification report consists of 6 pagesWFRGENT NV OtLcrgcr sesLecnr,r,eg-ZLricl 711 Fl-9000 Cent - Belgiet: +32 9 24177 50 - f: +32 9 243 77 5l - e: inl'o@rvirgenl conrBTWVAT/TVA: BEOB70 , Onclerner ingsnurrnrer: RPR CENT 0870 41B 4-l NV is a spin-off con p ny fronr tlre University of Chent, rreviously the Laboratory for Heat Transfer and Fuel Technology - Fire Safety Divi:ion LACG lassification report No.

2 16208 CPage 2 ol 6\/- warringtgnfl[ggentPCTa) Nature and end use applicationThe product Tapetex - 64 Linen Wall Material is defined as 'wall paper'Its classification is valid for the following end use application(s):'used as decorat ve materialfor interior applications'.WFRC NI nv is een spin-offbedrijf van de Un vers teit Gent voorheen Laboratorium voor Aanwend ng der Brandstoffen en Warmleoverdracht - Afdeling BrandveiligheidWFRCTNT nv is a spin-off company from the University of Gent, previously the Laboratory for Heat Transfer and Fuel Technolo8y - Fire Safety Divis on1 NominalvalueThe tested product is Tapetex - 64 Linen Wall Material,a woven textile of cellulosic fibres (line, cotton, viscose)on a paper backing of 70o/o woodpulp reinforced with30% polyester and with a maximum weight of approx650 g/m'?]

3 MaterialManufacturerTAPETEX bvThickness (mm)0,9 Surface mass (g/m')650 Shape / StructureRough{extured woven on the fire exposed side (seebelColourWhiteNoneUse of fire retardantsGlassification report No. 16208 GPage 3 of REPORTSD TEST RESULTS IN SUPPORT OF THIS global safetyCLASSIFICATION(-) Not applicable(-) The material did not melt nor pull away from the pilot burner.(**) Smoke value was corrected according to $ of EN '13823: 2010 'Note'WFRCENT nv is a spin-off cornp ny fronr thc Uliversity of Ccnt, previously the Laboratory for Hc t Tr nsfer nd Fucl Technology - tire Safety DivisionTest methodName of the sponsorTest reportref. of the laboratoryEN 13823(July 2010)TAPETEX bvHelmond, The Netherlands162088 WFRGENT nvGhent, Belgium162084EN tSO 11925-2(November 20'10)TAPETEX bvHelmond, The NetherlandsWFRGENT nvGhent, BelgiumResultsCriteriafor Class B-s1,d0 ComplianceparametersNumberof testsContinuousparametersMeanGompliancep arametersContinuousparametersTest methodParameterYesYesYesYes66((YesYesYes YesEN tSO 11925-2 (*)30s flame applicationSurface exposure- front sideEdge exposure- front sideF.)))}

4 < 150mmlgnition f lter paperF, <'150mmlgnition filter paperYesYesYes< 120< 120(-)=7,5<30<50oo(l(-)Yes(l(-)(-)YesYesFIGRA e,2 (Ws)FIGRA o,+ v 0V/s)LFS."6s"THR6oo, (MJ)SMOGRA (m'ls')TSP5ee. (m')Flamingdroplets/particlesf<10s l0s36535(-)1,80 (*.)32 (..)(-)(-)EN 13823 Glassification report No. 16208 CPage 4 of 6Y warr n Stp* [ [g ge n AND DIT FIELD OF APPLICATIONa) Reference and direct field of applicationThis classification has been carried out in accordance with EN 13501-1:2007+A1:2009and EN 15102+41 ) ClassificationThe product Tapetex - 64 Linen Wall Material in relation to its reaction to fire behavior isclassified as:Flaming dropletsFire behaviorSmoke productions1d0Bc) Field of applicationThis classification for the product as described in $1b, is valid for the following end useconditions.]]

5 Substrate: Euroclass A2-s1,d0 or better with a thickness of at least 12 mm and adensity of at least 525 kg/m3. Backing board: Euroclass A2-s1,d0 or better with a thickness of at least 9 mmand a density of at least 652,5 kg/m'o Without a void. Fixing: The product was glued (Perfax Vinyl/textile glue; 200 glm2) onto thesubstrate. The backing board was placed behind the No jointsThis classification is valid for the following product parameters:. Nominalthickness : 0,9 mm. Surface mass: 650 g/m'. Colour: White. Shape / structure: Rough-textured woven on the fire exposed sideWFRCENT nv is a spin-off con p try fronr the University of Ccr)t, rrcviously thc L borntory for Hcat Transfer nd Fuel lechnoloty - Firc Safety Div siotrClassification report No. 16208 CPage 5 of 6s/-nfireglobal the time the standard EN 13501-1:2007+A1:2009 was published, no decision was madeconcerning the duration of validity of a classification WARNINGThis classification report does not represent type approval nor certification of the productThe classification assigned to the product in this report is appropriate to a Declaration ofPerformance (DoP) of the essential characteristics of the construction product by themanufacturer within the context of a System 3 Assessment and Verification of Constancyof Performance (AVCP).

6 Under the Construction Products Regulation (CPR: EU 305/2011), such a Declaration ofPerformance (DoP) is a requirement for affixing the CE manufacturer has made a declaration, which is held on file. This confirms that theproduct's design requires no specific processes, procedures or stages ( no addition offlame-retardants, limitation of organic content, or addition of f llers) that are aimed atenhancing the fire performance in order to obtain the classification achieved. As aconsequence the manufacturer has concluded that a System 3 Assessment andVerification of Constancy of Performance (AVCP) is test laboratory has played no part in sampling the product for the test, although itholds appropriate references, supplied by the manufacturer, to provide evidence for thetraceability of the samples 13501 -1'.

7 2007+A1:2009: Annex B Reaction to fire classification report $ 5 Limitations:"The classification assigned to the product in this report is appropriate to a Declaration ofConformity by the manufacturer within the context of a System 3 Attestation of Conformityand CE marking under the Construction Products manufacturer has made a declaration, which is held on file. This confirms that theproduct's design requires no specific processes, procedures or stages ( no addition offlame-retardants, limitation of organic content, or addition of fillers) that are aimed atenhancing the fire performance in order to obtain the classification achieved. As aconsequence the manufacturer has concluded that system 3 attestation is test laboratory has, therefore, played no part in sampling the product for the test,although it holds appropriate references, supplied by the manufacturer, to provide fortraceability of the samples tested.

8 "WFRCENT nv is spin-olf con pan),fronr the Urriversity of Cent, prcviously the Lnboratory for He 1 Transfer nd Fuel Technology - Fire S fety D visionClassification report No. 16208 CPage 6 of 6warr ngtP"nfltgg"ntEN 13501-'lThis document is the original version of this classification report and is written in report may be used only literally and completely for publications. - For publications of certain texts, in which this report smentioned, our permission must be obtained in nv is een spin-offbedrijf van de Universiteil Gent, voorheen Laboratorium voor Aanwending der Brandstoffen en Warmteoverdracht - Afdeling BrandveiligheidWFRGENT nv is a spin-off company from the University of Gent, previously the Laboratory for Heat Transfer and Fuel Technology - Fire Safety DivisionDateNameSignature (*)2 4 sEP, 2013 Prepared byI.

9 LAMMERTYNir. K. CATRY2 4 sEP. 20'.13 Reviewed by(.) For and on behalf of "WFRGENT nv"