WORKSHOP & MACHINESHOP PRACTICE LAB MANUAL

3 Cutting of V Groove/ dovetail / Rectangular groove using a shaper. Cutting of Gear Teeth using Milling Machine. Exercises should include selection of cutting parameters and cutting time estimation. PART D (DEMONSTRATION ONLY) Study & Demonstration of power tools like power drill, power hacksaw, portable hand grinding, cordless

Tags:

  Manual, Practices, Cutting, Tool, Workshop, Milling, Gear, Machineshop, Workshop amp machineshop practice lab manual

Information

Related documents

GEAR MANUFACTURING PROCESS - 123eng

www.123eng.com

For cutting a gear on a milling m/c, the gear lank is mounted on am arbor which is supported b/w a dead centre & a lieu centre in the in dering head. The cutter is mounted on the arbor of the cutter must be aligned exactly vertically with the centre line of the indexing head spindle. The table of m/c is moved upward until

  Cutting, Milling, Gear

TYPES OF GRINDING WHEELS

www.rajagiritech.ac.in

CUTTING FLUIDS Recommended cutting fluids Soluble mineral oil and pure water are mixed in the ratio of 1:40 or 50 (depending upon the grinding wheel) and is used for grinding the following materials. oCast iron or hardened steel oSoft steel oConnected carbide tools (using silicon wheel) In India we use IOC Servocut oils as cutting fluid.

  Cutting, Tool

LABORATORY MANUAL

home.iitk.ac.in

1. Turning 1. Milling 1. Grinding 2. Boring 2. Drilling 2. Lapping 3. Shaping 3. Tapping 3. Honing 4. Planing 4. Reaming 4. Super-finishing 5. Hobbing 6. Broaching 7. Sawing The process of chip formation in metal cutting is affected by relative motion between the tool and the workpiece

  Cutting, Milling

Related search queries