www.osram.de/ledcheck

AN021 Further details on lead-free reflow soldering of LEDs

Further details on lead-free reflow soldering of LEDs Abstract The interaction between RoHS-compliant SMD components and lead-free processing can ... Due to the conditional reduction of the process window for the lead-free solder materials, increased attention must be paid to …

  Free, Deal, Flowers, Soldering, Solder, Free solder, Leds, On lead free reflow soldering of leds

AN048 The Basic Principles of Electrical Overstress (EOS)

Many OSRAM Opto Semicond uctors LEDs have ESD pr otection devices that are meant to protect the LED from ESD even ts. OSRAM Opto Semiconductors latest products are protected up to 8 kV HBM (human body mode l) or up to 15 kV acc. to IEC 61000-4-2 (air discharge). Features SYNIOS® P 2720: • Package: SMD epoxy package • Technology: UX:3

  Protected, 15 kv

AN122 Chemical compatibility of LEDs - dammedia.osram.info

chemical compatibility based on certain material components but not on commercial products, as the chemical components within each commercial product are subject to change without notice. Unfortunately, it would not be possible to include all chemicals, given that LEDs are subjected to very diverse

  Compatibility, Chemical, Material, Leds, Chemical compatibility of leds

AN109 Dry pack information - dammedia.osram.info

The card may be reused as long all the sensors elements are blue. Dry pack labels The following two labels are applied to the outside of the dry pack bag: A standard Barcode-Product-Label (BPL), identifies the contents by: producer (OSRAM Opto Semiconductors), country of origin, product designation, lot number, date code, material number and ...

  Sensor

AN032 PCB Technologies for LED Applications

The selection of appropriate materials for the circuit bo ard is therefore of utmost importance. FR4 printed circuit board (PCB) Classic composite PCB of glass fiber and epoxy resin, available in various compounds, versions (single-/ multilayer) and thickness (0.3 — 3.5 mm). Table 1: FR4 PCB versions Designation Material Note

  Printed, Board, Circuit, Printed circuit board, Circuit bo ard

AN006 Reliability and lifetime of LEDs

of customer expectations over the expected lifetime. In other words, the LED does not fail during its lifetime under the given environmental and functional conditions. The reliability of the products is thus based on the chain of the materials, the manufacturing process and the function of the component (Figure 1).

  Customer, Lifetime

Relays & Sockets RH - IDEC Corporation

Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers RH Relays & Sockets 774 www.IDEC.com Sockets (for Blade Terminal Models) Relays Standard DIN Rail Mount 1 Finger-safe DIN Rail Mount Through Panel Mount PCB Mount RH1B SH1B-05 SH1B-O5C SH1B-51 SH1B-62

MINAS A-series Operating Manual - Panasonic

AC Servo Motor Driver MINAS A-series Operating Manual • Thank you very much for your buying Panasonic AC Servo Motor Driver,A-series. • Before use, …

Bul. 440R - Guardmaster Safety Relays (DI, DIS, SI, CI ...

Bul. 440R — Guardmaster® Safety Relays (DI, DIS, SI, CI, GLP, EM, and EMD) Selection Guide

  440r

G6D - Omron

2 G6D PCB Power Relay G 6 D Engineering Data Dimensions Maximum Switching Capacity Durability Ambient Temperature vs. Maximum Coil Voltage Note. The maximum coil voltage is the maximum voltage that can be applied to the relay coil. Ambient Temperature vs. Must Operate and Must Release

Cerabar S PMC71, PMP71, PMP75 (Technical Information)

Cerabar S Endress+Hauser 5 Measuring principle Ceramic process isolating diaphragm used for PMC71 (Ceraphire®) The ceramic sensor is a dry sensor, i.e. the process pressu re acts directly on the robust ceramic process isolating

TÜV NORD DIALOGTAGE 2018

EN 13480-1 ALLGEMEINES 7 Jörg Bertram │ TÜV NORD Dialogtage 2018 "Konstruktion, Dokumentation und Entwurfsprüfung von Druckgeräten nach RL 2014/68/EU" Abschnitt 1: Anwendungsbereich Die Norm legt die Anforderungen für industrielle Rohrleitungssysteme und deren Halterungen, einschließlich Sicherheitseinrichtungen, aus metallischen duktilen …