XLamp XT-E LEDs - Home | Cree LED Components

J Series 2835 3‑V LEDs - Cree LED

UL LLC. J Series products are marketed by Cree LED for the benefit of Cree Venture LED Company Limited. CLJ-DS40 REV 7 4 CHARACTERISTICS ‑ JB2835B 3‑V G CLASS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point °C/W 7.6 Viewing angle (FWHM) degrees 120

J Series 3030 LEDs - Cree LED

UL LLC. J Series products are marketed by Cree LED for the benefit of Cree Venture LED Company Limited. CLJ-DS7 REV 5 6 RELATIVE LUMINOUS FLUX VS. CURRENT - JB3030 3 -V STANDARD P CLASS ELECTRICAL CHARACTERISTICS - JB3030 3 -V STANDARD P CLASS Relative Intensity vs. Current (Tj = 85ºC) 0% 50% 100% 150% 200%

Cree® LED Components IES LM-80-2008 Testing Results

REULT 2010-2021 Cree LED. The information in this document is subect to change without notice. Cree® and the Cree logo are registered trademars, and the Cree LED logo is a trademar, of Wolfspeed, Inc. XLamp ® is a registered trademar of Cree LED. NVLAP is a registered trademar of the National

XLamp XHP70.2 LEDs - Cree LED

XLAMP ® XHP70.2 LED 2017-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademars, and the Cree LED logo is a trademar, of Wolfspeed, Inc. XLamp ® and EasyWhite are registered trademars of Cree LED. UL ® and the UL logo are registered trademars of UL LLC.

  Xhp70

XLamp CXA1512 LED Data Sheet

Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. FLUX CHARACTERISTICS, EASYWHITE ® ORDER CODES AND BINS - 18 V (I F = 700 mA ...

  Flux

XM-L Color LEDs - Cree LED

Flux (lm) @ 350 mA Maximum Luminous Flux (lm) @ 350 mA) Red M 45.7 87.4 N 87.4 114 Green N 87.4 114 P 114 148 Blue F 13.9 39.8 White 2 80 100 3 100 120 4 120 140 • Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. SSSCCC-BD-HHHH-NNNNNNNNN Series XML = XML Color CTW = Red, green, blue ...

  Flux

XLamp XP-E LEDs - Home | Cree LED Components

FLUX CHARACTERISTICS - WHITE (T J = 25 °C) - CONTINUED Chromaticity Minimum Luminous Flux (lm) @ 350 mA Order Codes Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum F6 3750 K Q4 100 XPEWHT‑L1‑0000‑00CF6 Q3 93.9 XPEWHT‑L1‑0000‑00BF6 XPEWHT‑H1‑0000‑00BF6

  Flux

XLamp XHP35.2 LED Data Sheet

The XHP35.2 LED offers a high-intensity option. In this document, the term XHP35.2 denotes the XHP35.2 LED without regard to high density or high intensity. The terms High Density and High Intensity are used when necessary to differentiate the performance of the two options.

  Intensity

XHP50.3 High Density XHP50.3 High Intensity - Cree LED

High Intensity version of the XHP50. The XHP50.3 High Intensity provides double the intensity for existing XHP50 designs. XLamp XHP50.3 LEDs are optimized for outdoor and premium indoor lighting applications that require large amounts of light output from small luminaires, such as stadium, outdoor area and architectural spotlight. FEATURES

  Intensity

XLamp CXA1304 LED Data Sheet - Cree LED

Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2013-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademars, and the Cree LED logo is a trademar, of Wolfspeed, Inc. XLamp ® and EasyWhite are registered trademars of Cree LED ...

  Rece, Xlamp

luXEon Rebel Color line - Lumileds

Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 3 3 Autoclave Conditions-121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (V reverse

  C200

Series) (Half Pitch LO Own Brand LTV-2X7 Series Product ...

Apr 24, 2018 · 8.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown be low. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (T Smin) - Temperature Max (T Smax) - Time (min to max) (ts) 150 C 200 C 90±30 sec Soldering zone

  C200

1. General description - NXP

[3] This is tested according the joint IPC/JEDEC standard J-STD-020C of July 2004. [4] Purchase of an NXP Semiconductors IC that complies with one of the NFC Standards (ISO/IEC18.092; ISO/IEC21.481) does not convey an implied license under any patent right on that standards. Type number Package Name Description Version

  C200

XLamp XP-L LEDs - Cree LED

PRODUCT FAMILY DATA SHEET Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2014-2021 Cree LED. The inormation in this document is suect to change without notice.