XR500 Arming and Disarming - EPS

1 Quick referenceXR500 Arming and DisarmingDisarming the Alarm System1. Press CMD until ARM DISARM displays. 2. Select DISARM, enter your user code and press At ALL? NO YES, if you select NO, the keypad displays the name of each area followed by NO YES. Select YES or NO to disarm area(s) of your the Alarm System1. Press CMD until ARM DISARM Select ARM, enter your user code if a closing code is required and press At ALL? NO YES, if you select NO, the keypad displays the name of each area followed by NO YES. Select YES or NO to arm the area(s) of your system ON or ALL system ON : system ON means at least one area in the system is armed.

2 ALL system ON means all areas in the system are armed. The keypad begins counting down the exit time. 32-Character DisplayArmed LEDPo wer LEDData Entry Digit keys COMMAND Ke yBack Arrow KeySelect Keys1 2 3 49 0 CMD5 6 7 8 FRI8: 51 AMXR500 Keypad Layout and Function Keys LT-0895 (8/06) 2006 Digital Monitoring Products, in the USAINTRUSION FIRE ACCESS NETWORKS2500 North Partnership BoulevardSpringfield, Missouri 65803-8877 Disarming StepsTHU 6:29 AMARMDISARMENTER CODE: -Press the key under user code, and press YESS elect NO to Disarm only certain areas. Select YES to Disarm YESS elect YES to Disarm the displayed area.

3 Continue selecting YES or NO to disarm all areas of your choice. CMDCMDA rming StepsSYSTEM ONAll areas are Armed. At least one area Is 6:29 AMARMDISARMENTER CODE: -Press the key under your user code, and press YESS elect NO to Arm only certain areas. Select YES to Arm YESS elect YES to Arm the displayed area. Continue selecting YES or NO to arm allareas of your system ONCMDCMDOR