Example: air traffic controller
ZEISS Axio Imager 2
Particle Analyzer software supports the standards for cleanliness testing ISO 16232, VDA 19, and oil analysis ISO 4406, ISO 4407, and SAE AS 4059. With the system solutions from ZEISS, you ensure that the required microscope settings are always selected correctly. You receive reliable, reproducible results
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
The Basic Principle of Airyscanning
asset-downloads.zeiss.comAiryscanning is a technique based on confocal laser scanning microscopy. We introduce a detector concept that drastically improves signal by utilizing light that otherwise is rejected by the confocal pinhole. The increased signal-to-noise ratio can be used to retrieve high resolution information. Since this technique uses the confocal
Related documents
Aviation Fuel Quality Requirements for Jointly Operated ...
www.jigonline.comThe number of particles and the number of particles as a scale number as defined by Table 1 of ISO 4406 shall be reported where this method is being used to release the fuel (see also Note 2) . If limits are exceeded, Annex B of IP 565 or IP 577 or Annex A2 of D7619 may be appliedto eliminate trace free water, and cleanliness re -determined.
HPV-02. Variable pumps for closed loop operation.
www.linde-hydraulics.com>> Minimum requirements 20/18/15 in accordance with ISO 4406 >> Commissioning The minimum purity requirement for the hydraulic oil is based on the most sensitive system : component. For commissioning we recommend a filtration in order to achieve the required purity. >> Filling and operation of hydrau-lic systems