Lab: Basic Router Configuration

← Back to document page

All contents are Copyright 1992 2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8 Lab: Basic Router Configuration Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Def.

R1(config-if)#interface serial 0/0/0 R1(config-if)#ip address 192.168.2.1 255.255.255.0 R1(config-if)#clock rate 64000 R1(config-if)#no shutdown R1(config-if)# Note: The interface will be activated until the serial interface on R2 is configured and activated Step 12: Return to privileged EXEC mode. Use the end command to return to privileged ...

  Configuration, Basics, Routers, Config, Basic router configuration